Q6600 Overclock and Temperature
|
|
 Aug 19 2008, 07:17 PM
Return to original view | Post
#1
|
 
Senior Member
562 posts Joined: Mar 2006 From: hell 
|
guys,just wondering,im using Q6600 B3,and i overclocked it to 3 ghz and the idle temp is 50 C/49C/48C/50C,and im using xigmatek HDT S1283,Dont you think the temp is a bit high?Ive lapped my hsf and proc anyway.
|
|
|
|
|
|
Aug 19 2008, 09:07 PM
Return to original view | Post
#2
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
QUOTE(tkh_1001 @ Aug 19 2008, 07:30 PM) not sure... yeah but i assume yours is G0 stepping while mine is B3.Or did i lapped my proc or hsf wrongly?(but both on flat surface)me using non-lapped s1283 and it can hit 6x degree c on priming at 3.5ghz in an aircond room   |
|
|
Aug 20 2008, 12:40 AM
Return to original view | Post
#3
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
QUOTE(tkh_1001 @ Aug 19 2008, 09:15 PM) cant really know actually... cos even if u do same clock with me but the temp might differ for the same proc... well thats my mistake,ive bought a used B3 Q6600 and straight away lapped em.Well,i thought it could at least drop few Celcius like some people reported.just keep it under 60c lor.... u didnt compare with the temp b4 lap? |
|
|
Aug 20 2008, 03:45 PM
Return to original view | Post
#4
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
yeah,i guess so,on the flat surface(glass)
|
|
|
Aug 28 2008, 03:09 PM
Return to original view | Post
#5
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
hmm noob question here,anybody used mars?i wonder why there arent any 1:1 ram ratio,plus,what is the downside if ram runs higher than cpu?
|
|
|
Aug 28 2008, 10:25 PM
Return to original view | Post
#6
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
yeah,im pretty sure uzairi.By the way my temp right now is 51/50/50/50 idle and 65 when load.Running at Q6600 B3 at 3ghz(1.3300v) with sidepanel close.Any solution to lower down the temp?
|
|
|
|
|
|
Sep 30 2008, 05:29 AM
Return to original view | Post
#7
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
B3 is an old stepping.ANyway currently running my Q6600 B3 around 46C idle and 60C load?
This post has been edited by syahirax: Sep 30 2008, 05:29 AM |
|
|
Oct 4 2008, 04:08 PM
Return to original view | Post
#8
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
okay im running on prime.never test it with orthos or IBT.Basically prime pass around 9 hours or more.
Added on October 4, 2008, 6:55 pm QUOTE(tycheah_7 @ Oct 1 2008, 01:25 PM) as B3 is an older stepping, it should run hotter than the new ones well it is,although ive lapped it to mirror finish and running 3ghz at 1.34,its still hot.Maybe air ventilation in my casing are not that good.This post has been edited by syahirax: Oct 4 2008, 06:55 PM |
|
|
Oct 5 2008, 01:58 PM
Return to original view | Post
#9
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
QUOTE(k!nex @ Oct 5 2008, 05:18 AM) ur chip is sure hot. for mine..is G0 stepping VID 1.275. i do 3.2Ghz 1.264V at idle, 1.21V at load. at ambient 24C like dat, my idle 32C, load 54C(prime95). whats your exact vcore in bios?Do you sure your mobo doesnt have any vdroop at all?By the way,i didnt dare to run IBT.but so far so good for 3 ghz.I might be getting myself another Q6600 which is G0.hopefully it does have lower VID.Planning to archieve at least 3.4/3.6 ghz.:)How far you have push your proc?and what is the vcore?btw, u lapped it to mirror finish got big difference in temperature drop?? u shud try IBT, 9 hrs of prime cannot show its full stability. u can pass 50 rounds of IBT den it's around 98%++ stable. take note of ur temps,u'll be shocked  Added on October 5, 2008, 1:59 pm QUOTE(Dickong @ Oct 5 2008, 07:25 AM) You are lucky bro, to get low temp whem load. My same vid with your but i have to set to 1.325v to get 3.2g n my temp reach 60c when load.By the way i am curious how did you set your voltage to 1.264 when the bios setting of your mobo mininum is 1.275v. just wondering bro,what is your Q6600 batch?This post has been edited by syahirax: Oct 5 2008, 02:00 PM |
|
|
Oct 8 2008, 12:49 PM
Return to original view | Post
#10
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
51C while load runing IBT is amazing.im running mine and i got around 72C which a bit frightening me.
|
|
|
Oct 8 2008, 01:05 PM
Return to original view | Post
#11
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
currently at what vcore ure running at?
|
|
|
Oct 8 2008, 01:25 PM
Return to original view | Post
#12
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
yup,its basically depends on luck and Q6600 VID.mine isnt that good.need 1.4875 for 3.5 ghz.
|
|
|
Oct 8 2008, 04:52 PM
Return to original view | Post
#13
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
QUOTE(aLWAYStHEsAME @ Oct 8 2008, 01:49 PM) Ic, but that is not bad either, so ur processor is G0? How the temperature? the temp now is around 44C idle and load around 60-65CAdded on October 8, 2008, 4:53 pm QUOTE(tech_frix @ Oct 8 2008, 02:31 PM) i never tust d real temp or core temp... well,i doubt that my motherboard sensore reading are accurate.I got 26/27C idle for proc which is too low i guess.my i45 got d display for temp... and speedfan oso showed same speed as my mobo... i'm using ACF7PRO+TX-2....  and my proc vcore a lil low for 3.15ghz... 1.192 if not mistake... later will post...but mine is not Q6600... more to xeon... This post has been edited by syahirax: Oct 8 2008, 04:53 PM |
|
|
|
|
|
Oct 8 2008, 06:42 PM
Return to original view | Post
#14
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
nope,with real temp or core temp its around 37/38C.10 celcius more than in bios
|
|
|
Oct 9 2008, 10:29 AM
Return to original view | Post
#15
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
QUOTE(aLWAYStHEsAME @ Oct 9 2008, 09:53 AM) Well, many people got the same problem with 65nm processor, thats y i didnt use the mobo probe, may be bios problem, u can check at asus forum how does your xigmatek performance compare to zalman hsf anyway?Yes,like youve mentioned before so i guess im gonna stick with core temp for this time being |
|
|
Oct 9 2008, 02:50 PM
Return to original view | Post
#16
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
are you using the S&S kit with the hdt S1283?
|
|
|
Oct 10 2008, 08:32 AM
Return to original view | Post
#17
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
heres my latest try with Q6600
  |
|
|
Oct 10 2008, 09:15 AM
Return to original view | Post
#18
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
QUOTE(cscheat @ Oct 10 2008, 09:11 AM) guys, i just changed my Mobo from ABit ip35 pro to XFX 780i and found that my Q6600 Vcore requirements ! thats in bios?pretty amazing vcore for 3.6 ghz.whats your VID,mate?Abit ip35 Pro = 1.40Vcore for 3.6Ghz !!! XFX 780i = 1.32Vcore for 3.6Ghz !!! (recorded using CPUZ) This post has been edited by syahirax: Oct 10 2008, 09:16 AM |
|
|
Oct 10 2008, 09:32 AM
Return to original view | Post
#19
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
mine is 1.265,1.25 is pretty nice.Used to have 2 Q6600 with 1.325(not the best) and those overclocks worst.The lapped one is B3 and when i bought em i straight away lapped the proc.So didnt know the temp before.
|
|
|
Oct 10 2008, 03:30 PM
Return to original view | Post
#20
|
|
Senior Member
562 posts Joined: Mar 2006 From: hell
|
well yeah,the difference is either minor or major.But ive seen at least 2-3 C minimally after lapped.Are you gonna lap yours?
 This post has been edited by syahirax: Oct 10 2008, 03:52 PM |
| Change to: |  0.0404sec
 0.67
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 04:55 PM |
Quote