I was having the stock cooler as well but the only problem is the load temp - relatively high.
Intel Pentium Dual Core E2140/E2160/E2180 Thread, Discussion & Compilation
|
|
 Nov 27 2007, 11:11 PM
|
 
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur    
|
|
Quote|
|
|
|
|
Nov 28 2007, 12:52 AM
|
 
Senior Member
1,984 posts Joined: Jan 2003 From: Hell @ Penang
|
hi, i just bought a E2160 today, can OC until FSB333, 3G with stock cooler and no Vmod. is this a good result ?
never tambah, becos temperature already hit 55C when running super PI 32M. |
|
|
Nov 28 2007, 01:00 AM
|
Senior Member
1,326 posts Joined: Jan 2003 From: Kota Kinabalu, Orang Utan Clan o.O
|
Not bad
 Mine's @ 3.33GHz stock cooling and no add Vcore Not running super PI but @ around 50'C idle I think 55'C is still ok QUOTE(vex @ Nov 28 2007, 12:52 AM) hi, i just bought a E2160 today, can OC until FSB333, 3G with stock cooler and no Vmod. is this a good result ? never tambah, becos temperature already hit 55C when running super PI 32M.  |
|
|
Nov 28 2007, 01:01 AM
|
|
VIP
8,788 posts Joined: Jan 2003 From: Kuala Lumpur
|
All these Intel chips are super overclockers
 |
|
|
Nov 28 2007, 01:31 AM
|
|
Senior Member
1,326 posts Joined: Jan 2003 From: Kota Kinabalu, Orang Utan Clan o.O
|
Wait till I get my hands on these end of this month if can
http://forum.lowyat.net/topic/548708 Will try OC more~  QUOTE(clawhammer @ Nov 28 2007, 01:01 AM) All these Intel chips are super overclockers |
|
|
Nov 28 2007, 01:31 AM
|
|
Senior Member
1,984 posts Joined: Jan 2003 From: Hell @ Penang
|
just now try until fsb 370 ...then my system auto shutdown blak ...
dunno what problem. |
|
|
|
|
|
Nov 28 2007, 01:34 AM
|
|
Senior Member
1,326 posts Joined: Jan 2003 From: Kota Kinabalu, Orang Utan Clan o.O
|
lol, itchy hands eh?
have u set the ram multiplier to lower? and what ram are you using on it also check on pc health status for the cpu temp just to make sure it is still ok QUOTE(vex @ Nov 28 2007, 01:31 AM) just now try until fsb 370 ...then my system auto shutdown blak ... dunno what problem. |
|
|
Nov 28 2007, 04:15 AM
|
 
Forum Admin
44,415 posts Joined: Jan 2003 
|
those with stock cooling and over 3Ghz, kindly take care.
I tried before. Stock cooler, 25c ambient temp still ok. once I off my air-con and leave the system in the room with warmer temps. sorry la, no hope for doing Folding@Home on both cores. Added on November 28, 2007, 4:16 am QUOTE(Shoot@M3 @ Nov 28 2007, 01:00 AM) Not bad yes. idle that time it's around that temp. Mine's @ 3.33GHz stock cooling and no add Vcore Not running super PI but @ around 50'C idle I think 55'C is still ok load that time it goes beyond 70c easily. This post has been edited by goldfries: Nov 28 2007, 04:16 AM |
|
|
Nov 28 2007, 08:41 AM
|
|
Senior Member
1,326 posts Joined: Jan 2003 From: Kota Kinabalu, Orang Utan Clan o.O
|
Thx, and yikes better recheck my ambient temps and cpu temps
QUOTE(goldfries @ Nov 28 2007, 04:15 AM) those with stock cooling and over 3Ghz, kindly take care. I tried before. Stock cooler, 25c ambient temp still ok. once I off my air-con and leave the system in the room with warmer temps. sorry la, no hope for doing Folding@Home on both cores. Added on November 28, 2007, 4:16 am yes. idle that time it's around that temp. load that time it goes beyond 70c easily. |
|
|
Nov 28 2007, 08:47 AM
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(Shoot@M3 @ Nov 28 2007, 01:00 AM) Not bad idle is already @ 50'c? bro, watch out ya temp... Mine's @ 3.33GHz stock cooling and no add Vcore Not running super PI but @ around 50'C idle I think 55'C is still ok  |
|
|
Nov 28 2007, 08:51 AM
|
|
Senior Member
1,984 posts Joined: Jan 2003 From: Hell @ Penang
|
QUOTE(Shoot@M3 @ Nov 28 2007, 01:34 AM) lol, itchy hands eh? already set to 1:1 ram ratio, i guess is my stock heatsink not so good ... but anyway, 3G really enough for me already.have u set the ram multiplier to lower? and what ram are you using on it also check on pc health status for the cpu temp just to make sure it is still ok |
|
|
Nov 28 2007, 10:20 AM
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
All F3 Buyer @ Stay Near Penang @ OCer around here
Here come a TT @ OC discussion with all welcome to join us more info pls click here http://forum.lowyat.net/topic/558967/+220#entry14408167 |
|
|
Nov 28 2007, 07:39 PM
|
Senior Member
595 posts Joined: Jan 2003 From: Sitiawan/ Tropicana Petaling Jaya
|
QUOTE(bryanyeo87 @ Nov 24 2007, 02:18 AM) Try this timings in bios, set ram divider 1:1 first aiks. my previous post gone. oh ya, I did try these timing. but still no luck. cant pass 360 FSB. Cas Latency time 5 Dram Ras to Cas delay 6 Dram ras precahrge 5 precaharge delay 15 act to act delay 3 rank write to read delay 10 write to precharge delay 13 refresh to act delay 50 TRD auto TRD precahrge delay auto Try this settings I faced an issue when I try to update my BIOS using @BIOS in windows. Below are the screenshot. anyone can help? Attached thumbnail(s) 
|
|
|
|
|
|
Nov 28 2007, 10:07 PM
|
Senior Member
3,175 posts Joined: May 2006
|
QUOTE(Snyy @ Nov 28 2007, 07:39 PM) aiks. my previous post gone. oh ya, I did try these timing. but still no luck. cant pass 360 FSB. YOu have the bios write protect on in the bios, you need to disable it first and thenI faced an issue when I try to update my BIOS using @BIOS in windows. Below are the screenshot. anyone can help? Tick the following: - Clear DMI Data Pool - Clear PNP Data Pool |
|
|
Nov 28 2007, 10:13 PM
|
All Stars
14,990 posts Joined: Jan 2003
|
QUOTE(Snyy @ Nov 28 2007, 07:39 PM) aiks. my previous post gone. oh ya, I did try these timing. but still no luck. cant pass 360 FSB. Updating BIOS in Windows is not really a good idea cos it's slow, and if something interrupts the transfer, you'll get write errors. Try updating via DOS, it's much faster and safer as well.I faced an issue when I try to update my BIOS using @BIOS in windows. Below are the screenshot. anyone can help? This post has been edited by wodenus: Nov 28 2007, 10:17 PM |
|
|
Nov 29 2007, 09:34 AM
|
Senior Member
533 posts Joined: Oct 2007 From: in between kL and Jb
|
ican only hit 280 fsb with my 2180 with stock vcore... haih.. so sad right now..
everything else is set to auto with the fsb:ram at 2:3, cannot set to 1:1 with my f-190hd... kvr 2 gb 667 mhz This post has been edited by huh?: Nov 29 2007, 09:35 AM |
|
|
Nov 29 2007, 06:38 PM
|
|
Senior Member
3,175 posts Joined: May 2006
|
drop the cpu multi by 1 and retry
 |
|
|
Nov 29 2007, 07:35 PM
|
Junior Member
236 posts Joined: Jan 2003
|
QUOTE(huh? @ Nov 29 2007, 09:34 AM) ican only hit 280 fsb with my 2180 with stock vcore... haih.. so sad right now.. try + sum more VTTeverything else is set to auto with the fsb:ram at 2:3, cannot set to 1:1 with my f-190hd... kvr 2 gb 667 mhz but i think is the ram problem  |
|
|
Nov 29 2007, 08:06 PM
|
|
Senior Member
533 posts Joined: Oct 2007 From: in between kL and Jb
|
flashed my bios just now and it enables fsb:ram to 1:1 and stilll the same problem occured... haih...
i tried setting the vcore to 1.36 ( detected by the cpuz ), fsb 290,multiplier 10 2900 ghz.. else to default it could not pass OCCT test |
|
|
Nov 29 2007, 08:49 PM
|
|
Senior Member
3,175 posts Joined: May 2006
|
drop the multi to either 8 or 9 and retry with 1:1 la >_>"
as well as use my timings posted (needs to be adjusted etc etc) |
|
Topic ClosedOptions
|
| Change to: |  0.0311sec
 0.43
 6 queries
 GZIP Disabled
Time is now: 10th December 2025 - 04:07 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.