Outline ·
[ Standard ] ·
Linear+
Intel Pentium Dual Core E2140/E2160/E2180 Thread, Discussion & Compilation
|
huh?
|
 Nov 30 2007, 12:27 AM
|
|
will try the settings you gave me tomorrow, right now running orthos at 290fsb multi 10, vcore 1.36... just want to give it a shot right now...
anyway, tried to lower the multi to 9 and it can only hit 310 fsb... hrmmmm... fsb:ram at 1:1 with stock vcore.. myb can go further if i increase vcore and have a good hsf... what is the safe temperature for 2180 nad the recommended vcore for a folding machine..? thinking of getting at least 3.2ghz with artic freezer 7 and mx2 thermal paste..
|
|
|
|
|
|
bryanyeo87
|
Nov 30 2007, 12:49 AM
|
|
|
hmm ok, so max is 310 fsb at multi 9
try 8 and then 7
from my testing, e2xxx series sort of like 8 multi on the average x__X?
|
|
|
|
|
|
huh?
|
Nov 30 2007, 01:55 AM
|
|
|
hey there.. just tried to lower the multiplier to 9,8 and 7 .. and unfortunately i can only hit fsb320 anything higher than than that wont even boot...and i did use the ram settings that you post..didnt work either.. i guess it is the limit for my rig...juz not my luck i guess.. and the worst part is, i have too suck it up and face the facts that i can never reach my goal..... YET...hahaha.. will wait till next year and get a better mobo + pros + ram if my pocket permits..
mrmm.. enough with the mumbling, thks for your help by the way..right now my pc is stable at 2.9ghz fsb 290 multi 10 vcore at bios 1.375 but at cpuz 1.36..i also dont know which one to believe...run orthos for 4 hours blend test, cpu temp max at 68 degrees..
last word....im a first time OCer...feels good to join the ring...huhuhu
|
|
|
|
|
|
sHawTY
|
Nov 30 2007, 02:13 AM
|
|
|
QUOTE(huh? @ Nov 30 2007, 01:55 AM) .......... Dude! You have a really nice nickname!  |
|
|
|
|
|
huh?
|
Nov 30 2007, 09:16 AM
|
|
|
QUOTE(sHawTY @ Nov 30 2007, 02:13 AM) Dude! You have a really nice nickname! hahaha .. Is it a compliment or something else?? huhuhu  you have a pretty cool offer with the crucial RAM was tempted to buy it, but what to do.. my pocket isnt that deep enough.. KVR pun jadi lah.... |
|
|
|
|
|
sHawTY
|
Nov 30 2007, 12:51 PM
|
|
|
QUOTE(huh? @ Nov 30 2007, 09:16 AM) hahaha .. Is it a compliment or something else?? huhuhu Serious complimet la. Never seen anyone using that nickname in any forum. Nice idea!  Okay, we can stop being offtopic now. |
|
|
|
|
|
Are_keem
|
Nov 30 2007, 06:01 PM
|
|
|
my gaygaybte DS3 confirm KO,
sent for Rosak Mai Antar aka RMA oledi..
how long usually will it takes?
|
|
|
|
|
|
ah_khoo
|
Nov 30 2007, 06:53 PM
|
- No Action Talk Only -
|
QUOTE(Are_keem @ Nov 30 2007, 06:01 PM) my gaygaybte DS3 confirm KO, sent for Rosak Mai Antar aka RMA oledi.. how long usually will it takes? depend on how fast d board send by d shop to d distro.  my condolence to ya board bro...  |
|
|
|
|
|
gsan
|
Nov 30 2007, 07:35 PM
|
|
|
QUOTE(Are_keem @ Nov 30 2007, 06:01 PM) my gaygaybte DS3 confirm KO, sent for Rosak Mai Antar aka RMA oledi.. how long usually will it takes? yours one is rev1.0 or 2.0 ? |
|
|
|
|
|
Are_keem
|
Nov 30 2007, 08:53 PM
|
|
|
mine is Rev 1.0,
just a month and half old..
so easy meh to kill this board..
|
|
|
|
|
|
bryanyeo87
|
Dec 1 2007, 12:58 AM
|
|
|
no wor...maybe ur unlucky thats why :S
mine still alive and kicking
|
|
|
|
|
|
seanlimys
|
Dec 1 2007, 07:29 PM
|
|
|
wats the difference between biostar tforce p965 and 965pt?which is best overclocker?
|
|
|
|
|
|
HaHaNoCluE
|
Dec 1 2007, 08:31 PM
|
|
|
QUOTE(Are_keem @ Nov 30 2007, 08:53 PM) mine is Rev 1.0, just a month and half old.. so easy meh to kill this board.. usually takes about 4 to 6 weeks for RMA from distro but also depends if the shop is sending it to them asap... bro, u juz unlucky... ther's been so many users of that mobo but only minor reported their board kantoi!!! |
|
|
|
|
|
archonixm
|
Dec 2 2007, 03:43 AM
|
|
|
You should just sent to the distro yourself, faster.
|
|
|
|
|
|
huh?
|
Dec 3 2007, 11:01 AM
|
|
|
i was pretty bored and too many assignment to do till ive freak out last night..!! hahaha....
lowered the multiplier to 8 and up the 1.2 NB volt to 1.4 in the bios, vcore at 1.36 and i hit 330 fsb.. didnt try any lower multiplier than that cause i was too hungry.. with the same volts, tried fsb 300 with multi 10 and it booted up! what a suprise.. run orthos but failed after 1 minute..i then set the vcore to 1.38 and run orthos again and now my temp is hitting 71 C.. what the fisH? i stop the test and revert back to 2.9 ghz setting....
going to get a better HSF soon and post the OC result.. the vcore is too high for a M0 stepping processor right? im pretty sure i got a poor batch of 2180...nevermind, maybe better luck next time
|
|
|
|
|
|
clawhammer
|
Dec 3 2007, 11:03 AM
|
///M
|
I think your Vcore is fine. I had mine doing 1.38125V all the time.
|
|
|
|
|
|
wodenus
|
Dec 3 2007, 11:09 AM
|
|
|
QUOTE(huh? @ Dec 3 2007, 11:01 AM) i was pretty bored and too many assignment to do till ive freak out last night..!! hahaha.... lowered the multiplier to 8 and up the 1.2 NB volt to 1.4 in the bios, vcore at 1.36 and i hit 330 fsb.. didnt try any lower multiplier than that cause i was too hungry.. with the same volts, tried fsb 300 with multi 10 and it booted up! what a suprise.. run orthos but failed after 1 minute..i then set the vcore to 1.38 and run orthos again and now my temp is hitting 71 C.. what the fisH? i stop the test and revert back to 2.9 ghz setting.... going to get a better HSF soon and post the OC result.. the vcore is too high for a M0 stepping processor right? im pretty sure i got a poor batch of 2180...nevermind, maybe better luck next time VCore is fine... yes you gotta get a better HSF... and better TIM. And then maybe. You might get air-conditioning while you're at it lol This post has been edited by wodenus: Dec 3 2007, 11:11 AM |
|
|
|
|
|
huh?
|
Dec 3 2007, 11:16 AM
|
|
|
owh really? NooB here..  i did read lots of review on 2180 and most of then did not even have to increase vcore to hit 320fsb... but not me.. or is it my board? abit f-190hd, bet then again hitting 320 should not be a prob with this board IMHO |
|
|
|
|
|
andx517
|
 Dec 3 2007, 11:08 PM
|
|
|
omg finally i finish reading these 35 pages  sorry im new here i need some suggestion, im low on budget, ima going to get following items 1. Intel E2160 M0 2. Gigabyte P35-DS3 3. KVR667 1GBX2 (Hynix FP-Y5) is this still the recommendation? for low budget pc? wish to reach 3Ghz with stock cooling.. hope i can do it haha oh, which power supply do i require to reach 3Ghz? currently using Enermax Noisetaker 320 True Power, not enough rite? does my PS enough for default setting(1.8Ghz)? if i get like 8600gt gc?  |
|
|
|
|
|
bryanyeo87
|
Dec 3 2007, 11:24 PM
|
|
|
Sure its enough.....for how long that is the question  |
|
|
|
|
Quote
0.0184sec
0.61
6 queries
GZIP Disabled