heyya, might join u guys this starting this weekend...any tips on buying the c2d processors and what mobo to get ar? mobo budget about rm 400 or less

yea..any good steppings? btw, how to check steppings on c2d chips? 2moro im going down lowyat pickup a complete rig

nvm, decided to get gigabyte P35 DS3...good for oc anot this one?
or should i get Fatal1ty F-I90HD?
or asus p5k SE

This post has been edited by bryanyeo87: Aug 18 2007, 12:22 AM

wooot, gigabyte p35 ds3 quite good, at least compared to abit Fatal1ty F-I90HD coz i was testing both....then played with 2 units of e2140 M0 steppings, can reach fsb 375 easily at stock volts will post screenshots of the result and the hardware setups later

This post has been edited by bryanyeo87: Aug 20 2007, 02:09 PM

a little spoiler for 2moro's pics and results from todays and sundays tests...coz the tests were done at my gf's hse (i learnt how to oc from her LMAO) the pics and stuff were left there...

idle at 38c and load at 59c (orthos 2 hrs) on stock HSF @3ghz/stock volts with ambient temps at 33ch e2140, SLA93

This post has been edited by bryanyeo87: Aug 21 2007, 02:57 AM

SLA93 e2140
with patriot value rams

ALL at Stock Volts






@davidletterboyz
will do that but average wall i found out from this bunch of e2140's is about 370~390 @ STOCK VOLTS...not sure if upping voltages could help it =)

This post has been edited by bryanyeo87: Aug 22 2007, 10:41 AM

cant la...can boot up at 420x8 @ 1.4v bios, but it wont pass orthos ...=(....maybe coz im using stock cooler and casing no airflow at all...and summore psu is st400 only T__T

wokie...the long awaited pics of the setups haha
so it is concluded that the average m0 stepping wall is at 3ghz




and that p35 chipset can do 448 fsb easily with an e2140 and it can be done up to 495 with an intel e6850.


all tests was done on stock voltages and stock cooling with the exception of 1.9v for the fsb test

This post has been edited by bryanyeo87: Aug 24 2007, 11:55 AM

but then it wont even boot windows at 400x8 wor T_T...summore i went up to 1.4v T_T....

@goldfries
whats the model and the bios version ur using? i can try to ask sum1 to try modding it =)
or would u consider a silver conductive pen to make the fsb 1333 or 1066? =D

o ok....=( sorry to hear that..


it is hynix fpy5, its doing on my 925mhz at my second pic, it can do ddr 900-5-5-5-15 @ 2.0v...so...i dunno where is the hold back..maybe like kuching said, its the stupid alu stock cooler >_<"

oh yea, where to get the conductive pen..i asked all the shops at seapark including those selling chips and resistors

and also, i have requested for a quote for a custom made wc block..rm 50 only nia!...whole set calculated is about rm 200 or less with block, pump and a second or 3rd hand bmw 750cc heatercore

use lavalys everest works flawlessly for me =)

works fine for all the fans with rpm sensor i plugged into the mobo =)

whr got G0 for e2xxx wan? only M0 leh...duno, im getting 380x8 @ stock volts for my e2140 M0 and F@H 2 clients, so far no issues ...awaiting to increase to 390x8 and orthos it for a few hours to let it burn-in and see if i can make it fly till 400x8 @ stock volts...and all this using the stock alu sink with a delta fan strapped on

btw, anyone wanna sell their e6xxx or q6xxx do let me know

ehehe, the dark side needs more people doesnt it shawty



that means bios volt set at 1.50v? or you left it to auto?

waa....goldfries on an oc frenzy, whole night didnt sleep ka? hahahaha

btw, how much volts u pumped in to it?

---

Added on September 1, 2007, 12:33 pmdrop the ram to 1:1
off EIST, C1E

This post has been edited by bryanyeo87: Sep 1 2007, 12:33 PM

like t3chn0m4nc3r said, pump the vcore to 1.35 or 1.375 and raise the fsb slowly, then test it

or just jump straight to 350mhz fsb and see if it boots

or u can use clockgen and clock it from windows =)

This post has been edited by bryanyeo87: Sep 1 2007, 08:08 PM

ehehe, goldfries is not going down to bangsar tonight for clubbing session, instead hes gonna continue his OC frenzy tonight right? some more it just rained, should cool the temps a few more C eh?


@lobuni
well, it works just fine for me, worst comes to worst, install memset and clockgen in windows and OC from there lor

go bios, disable EIST,

Enable C1E if you want to have power saving

disable C1E for max speed 24/7

not sure about biostar mobo, but EIST limited my OC by 20mhz of the fsb lol

This post has been edited by bryanyeo87: Sep 8 2007, 12:23 AM

woot, nice, whats the voltage in bios u set?

btw, why ur pi timing so much slower then mine @3ghz only wan? =/