but how bout the fan speed?

works fine for all the fans with rpm sensor i plugged into the mobo =)

How bout the M0 and G0 stepping for E2xxx? Must be improved in oc.

whr got G0 for e2xxx wan? only M0 leh...duno, im getting 380x8 @ stock volts for my e2140 M0 and F@H 2 clients, so far no issues ...awaiting to increase to 390x8 and orthos it for a few hours to let it burn-in and see if i can make it fly till 400x8 @ stock volts...and all this using the stock alu sink with a delta fan strapped on

btw, anyone wanna sell their e6xxx or q6xxx do let me know

There's only M0 for E2XXX

MO stepping E2140...hehehehe...prime stable at 425Mhz..nice and cheap for oc.


Attached thumbnail(s)

COOL! What vcore?

I can see someone is lured to the dark side.

brother 1.45 during load.........

ehehe, the dark side needs more people doesnt it shawty



that means bios volt set at 1.50v? or you left it to auto?

I think its better than L2. My E4300 L2 on 965P cant go beyond 3.1GHz stable no matter I adjust the voltage..

Yay, BIOSTAR released latest BIOS for the TP35D2-A7!!!

I was about to publish my review on the board (just finished preparing pics) and a lot of harsh stuff on them then WOW this BIOS saved the day.

finally 400mhz option for Allendales!!! yeah now running at 2.66ghz! sweeeett!

Using :
GA-P35-DS3
E2160
Crucial Ballistix Tracer 1066mhz

Prob is i cant go beyond 335mhz or else it cant boot....

This post has been edited by Proclaimer: Sep 1 2007, 04:19 AM

w00t!!!

http://valid.x86-secret.com/show_oc.php?id=237020 3.2ghz!!!

---

Added on September 1, 2007, 11:27 amw00t again!!!

http://valid.x86-secret.com/show_oc.php?id=237022 3.325ghz! now for some testing.

---

Added on September 1, 2007, 12:27 pmawww crap. just now 3dmark06 hang on CPU test. so i lowered it a little bit and now i can't get to 3.325 already. highest now is 3.318. aihh. well good enough la.

This post has been edited by goldfries: Sep 1 2007, 12:27 PM

waa....goldfries on an oc frenzy, whole night didnt sleep ka? hahahaha

btw, how much volts u pumped in to it?

---

Added on September 1, 2007, 12:33 pmdrop the ram to 1:1
off EIST, C1E

This post has been edited by bryanyeo87: Sep 1 2007, 12:33 PM

Tried those d.. Still stuck at 335mhz.. Duno wats wrong also.. Sumore mine is mo stepping...

pump up the volts... set ur RAM timing to 5-5-5-20 for safety cuz it may go lower at default... if still can't u juz wasted ur RAMs...

aiks..why cant?hah..ask bryan..tailo there~

like t3chn0m4nc3r said, pump the vcore to 1.35 or 1.375 and raise the fsb slowly, then test it

or just jump straight to 350mhz fsb and see if it boots

or u can use clockgen and clock it from windows =)

This post has been edited by bryanyeo87: Sep 1 2007, 08:08 PM

u should pump it out the vcore. what hsf do use? if stock better not too high.