long time no track G33 price d... so 4got d.... but should be round there... will confirm wif scanart 2morrow...

This post has been edited by t3chn0m4nc3r: Aug 18 2007, 12:51 AM

now rm500+ ..soo expensive

yeah. hehe. i suspect i was hold back by the Kingston chip.

---

Added on August 18, 2007, 11:59 amok this is freakin' stupid. it took BIOSTAR 5 days to reply, they gave me a new BIOS but heck i'm not sure whether they understood what I was complaining.

I replied, I've not gotten any answer on the same day so heck. I decided not to wait. Made the effort to find a floppy disk and drive, updated the BIOS and ............... WTH, still the stupid RAM ratio.

aihh. me no happy la.

This post has been edited by goldfries: Aug 18 2007, 11:59 AM

tat's the price for G33 big board... i'm talking bout G33M... mATX form factor version... small board leh...

Gigabyte GA-G33M-DS2R kan?oh..that one rm485 right now..

wooot, gigabyte p35 ds3 quite good, at least compared to abit Fatal1ty F-I90HD coz i was testing both....then played with 2 units of e2140 M0 steppings, can reach fsb 375 easily at stock volts will post screenshots of the result and the hardware setups later

This post has been edited by bryanyeo87: Aug 20 2007, 02:09 PM

maybe u shud ask some bios modder to help u to mod the bios
thou i m not sure where can u find them

that's the thing, if i need a BIOS modder to mod BIOS before i can OC, then the board sucks already k.

waa..fast fast..want to see ur temprature also..

a little spoiler for 2moro's pics and results from todays and sundays tests...coz the tests were done at my gf's hse (i learnt how to oc from her LMAO) the pics and stuff were left there...

idle at 38c and load at 59c (orthos 2 hrs) on stock HSF @3ghz/stock volts with ambient temps at 33ch e2140, SLA93

This post has been edited by bryanyeo87: Aug 21 2007, 02:57 AM

my bad... the model i saw b4 was G33M-S2... without the D...

---

Added on August 21, 2007, 10:12 amcan go up to 400 wif E2160... need 1.4V though...

This post has been edited by t3chn0m4nc3r: Aug 21 2007, 10:12 AM

Cool result. Can u please test at above 400fsb? I wanna see if M0 has 400fsb wall like most E2140/60 L2 have...

owch M0 is on shelves already..any kind souls able to help me hunt n post a e2160?

L2...? my CPU-Z says 2 only... no L also... juz revision L2...

SLA93 e2140
with patriot value rams

ALL at Stock Volts






@davidletterboyz
will do that but average wall i found out from this bunch of e2140's is about 370~390 @ STOCK VOLTS...not sure if upping voltages could help it =)

This post has been edited by bryanyeo87: Aug 22 2007, 10:41 AM

using a e2160 SLA3H or something. lol forgot. cant oc higher than 3.15ghz. suspecting ram limiting me. and vista giving more headaches. will do more oc-ing after installing xp. no xp cd . the best fsb:ram ratio is 1:1 ah? sorry noob question. lol. can get 1:1 ratio but SPD at 2.0 (whatever that means), 5-6-6-16, 668mhz ram. 3ghz oc. if 3.15ghz oc ram running at 5-5-5-15 forgot what ratio, either 5:6 or 3:5. need some sifu to help. but later la. headache with vista. lol.

ngaa..what do u want actually?

1:1 ratio is the best?

i say yes if ur bus speed is 500,or 600..hehehe

This post has been edited by fesick: Aug 22 2007, 04:19 PM

looks strong for M0, push it higher


higher memspeed than FSB giv unnoticeable performance increase imo, atleast i dun c any
jus stick to 1:1, more stable and more oc room
limit at 3.15? same as me probably batch limitation, i've tried numerous tweak but couldnt pass 3.15

Huh? I dont understand what you mean...lol
Anyways...what i mean is E21x0 has either L2 or M0 stepping
I still dont know if M0 is helping...like G0 for quadcore series...but then I heard M0 for E4x00 sux...some i have seen wont even reach 3GHz.

probably they are limiting budget lvl proc ocability? to boost higher end market