for starters, just get whatever you want, with whatever features that you need. start somewhere if you are interested in making mkb modding a hobby.

How much are you willing to spend though?

Also preferred size and usage?

How is the build quality? 2xx is damn cheap for alu, even if it is just the top.

this is my first mech keyboard
so, i'll answer the best i can

its quite heavy compared to previous kb Logitech g100s
feels sturdy
cable not detachable
cable feel thick n would last
blue switch key very loud

hi any method to fix loose keycaps besides cello tape?

as long as you like it, everything is good.

the key idea of the fix is to ensure excess gap between the key cap's stem hole and slider's stem is filled up with something. you try other materials beside cellophane tape.

-RM200, want to test mech keyboards out before investing more.
-TKL or 60% would be fine, but no idea whether the programmed layers of the 60% would be a huge hassle.
-Usage will be lots of typing at the office, so quieter switches like browns or red will be nice.

Hi all sifu, want to get some ideas on what other hot-swappable wireless keyboards out there, currently using Keychron k2 and been wanting to upgrade my experience, chase down the rabbit hole and thinking about lubing the switch, hence the hot-swappable.

Saw some people suggesting Geek GK84 or Keychron K6 but looking for more option.

here is another reskinned switch, gateron merlot, https://novelkeys.xyz/collections/switches/...merlot-switches

essentially, it's gateron red with nylon housing (ks-3), with different stem and housing colors.



i rather hope that manufacturers putting efforts on innovations instead of look.

Anyone know where to get IBM Model M or Unicomp Ultra Classic?
https://www.pckeyboard.com/page/category/UltraClassic

I like keyboard that last forever.

I wished I could help you. I used to sell quite a few IBM Model Ms and Model Fs but had to take a break due to illness.

These days I only have my own collection and some parts for sale, like this blank keycap set for IBM Model M keyboards and this Duratrax Precision Nut Driver to open up IBM Model Ms. There are some vintage IBM keyboards on eBay but I'd recommend a lot of caution because many of them have issues or are overpriced.

This post has been edited by epiguru: Apr 14 2020, 05:06 PM

in general, under normal usage, most mkbs with decent qualities last forever. they are not pricey either.

it's when manufacturers started to cut corners (e.g., bad-quality switches, pcb, key caps with wrong materials and printing technologies, etc), introducing unnecessary components that have higher risks of failure (e.g., led, knob), and various user behaviors, that make mkbs more vulnerable to failures. (to be fair, most of the times they are repairable, as long as you have replacement parts)

mkbs are supposed to be simple to serve its purposes as an input device imo. the obvious advantage of mkbs is that it can be further optimized for a much better typing experience. this is fundamentally a good thing, because since you will use it for a long long time, you might as well make it serve you better. to achieve all the above, you don't really need anything fancy.

as for vintage boards, if it's for collection purposes, by all means hehe

sifus, how are Gateron KS-3X1 and KS-3X47 different from Gateron KS-3?

basically they are the same switch. the variants are because of different housing color combinations.

https://drop.com/buy/nym96-aluminum-mechani...rt=highestRated

is this a good keyboard?


my second option is krepublic xd84 aluminium.
but i`m not sure what is the total cost to build it.
can someone help to show me the item that i need put in aliexpress cart for xd84 aluminum keyboard including
assembling service and gateron brown? i`m afraid that i will buy the wrong item
thank you very much.

Case

PCB Choose PCB only and not any of the other kits

Stabs. Choose GH60 plus 1 setEdit - Actually if you are sure you want a 6.25U spacebar, you can choose the GH60 1 set. Difference is it doesn't come with a 7U stab.

Switches. I recommend the 5 pin since the PCB accepts it. Makes it easier to align. But you're not installing yourself so up to you. How many pieces depends on what layout you want. Check on the PCB page for possible layouts.

Choose assembly switch 80

All you need now is keycaps and a USB C cable.

But since you like the NYM96, why not the XD96?

This post has been edited by niakulah: Apr 17 2020, 11:05 AM

I offer build commissions. Assembly starts from around RM80 for the most basic one, of course, the pricing adds up when including tuning and tweaking (lubed switches, tuned stabs, foamed plate etc) as well as if there's any LED involved. You could always drop me a message on Facebook Messenger if you're interested.

thank you very much for your help sir. really appreciate it. BTW i already had a full layout keyboard. just want to try compact keyboard.

thank you for your offer sir. will contact you later if i decided which keyboard that i`ll buy.

Anyone bought these generic switch films before?
#Aliexpress MYR 29.36 16%OFF | 1 pack mechanical keyboard DIY MX Switch film MX switches dustproof sticker customized keyboard accessories
https://a.aliexpress.com/_d6iU4ZG

If I have RGB, how important is it that I get clear films?

if you want the full bling then clear type films is a must. standard colorful switch films relevant when you have black housing like this

DSC_3148 by Yong Jun Keat, on Flickr