QUOTE(PleaseEnterYourName @ Jan 29 2018, 08:00 PM)
Guys, I recently relocate astro to New house. Right now the signal strength receiver 1 around 74% and receiver 2 around 80. I noticed a bit stuttering when watching astro.
Strength should be more that 80% is ok right? So I should be calling astro right?
If the Strength reading is less than 60% on Astro box, very likely you'll start to see pixelation (the one that has many square boxes or even blackout due to poor or no signal).
Try perform Transponder Scan on your Astro box, to see if your satellite dish requires realignment. Press home >Settings>STB Diagnostics
Press right arrow Button to navigate to "Tuner" tab, then press Green button to start the Transponder Scan. Wait till it goes 100%, it shall takes about 2 mins. Do share us photos of your transponder scan results here.
If you see some frequencies (e.g. 10732MHz) all those, has a low Strength % reading (such as lower than 70%), then it is very likely your dish requires realignment, or there's something wrong with the cable.