Good?
That's a matter of opinion.
If you're really serious in watercooling em gpu & cpu, be ready to fork out RM1K for it.
Else if you can't for em them budget, just stick with aircooling.

Don't just go watercooling because it's watercooling, go watercooling because you really need em and you have enough budget for em.

This post has been edited by sHawTY: Aug 8 2007, 01:18 PM

This is a "real" watercooling kit that worth every single penny you spent rather than getting that CM crap.

CPU Waterblock: D-TEK FuZion = RM245
GPU Waterblock: Swiftech MCW60-R = RM199
Radiator: Cool-Trek DP1203 = RM315
Pump: Swiftech MCP655-B (Laing D5) = RM335
Reservoir: Swiftech MCRES Micro = RM90
Tubes: Masterkleer 1/2" ID, 3/4" X10 Feet: RM75

Total: Kira Sendiri.

This is the real deal.
If you can't afford it, then don't bother going for watercooling with those CM or TT thingie.
Just stick with aircooling if you can't afford it.

Yeah, i may sound harsh, but this is the truth.

This post has been edited by sHawTY: Aug 8 2007, 01:23 PM

http://www.lelong.com.my/Auc/List/2006-10DSale3750132.htm

this person sells all in one
sry for the outside links

Oh yeah, and you think that one good enough to cool all in one?
I LOL'ed.

but at rm180 then maybe fun enuf for play play toy, but just make sure it don't leak 1st... some1 tried that before, it works ok, at least better than some air cooler coz can only compare to hsf lower than rm200 to be fair mar... but that wc kit reliable onot, dunno lar... anyway only rm180 for an experience or lesson oso ok mar...

sHawTY may sound harsh, looking at his reply memang harsh, nice guy actually ...but he's right.My roomie's so called pro TT bigwater failed on him.All i could do is help him get tht nonsence out.When i go watercooling its going to be exactly or closer to sHawTY's choice listed ther.sHawTY show sum picz of ure cool stuff with tht ultra of urs envy you man..

This post has been edited by Bigblock: Aug 10 2007, 06:33 AM

or maybe other cheaper option like

apogee gt rm199
mcw-60r rm199
nirox p2800 (aqua) pump rm40
mcr220-qp rm195
mcres micro rm90
tubing as u like, those normal pvc oso can but harder to install...
2 liter battery water rm5 (at petronas station)

less than rm800 for complete with gpu block as starter kit lor...

try looking into garage sales... something like this link provided or any 2nd hand private sales...

http://forum.lowyat.net/index.php?act=ST&f=54&t=452419

good luck...

finally my wc kit has been successfully installed on my mobo n running (it's not in my pc as i haven't got my casing back yet, so i run them naked on my table)...

my wc loop:
reservoir > pump > 2 x radiators > cpu > gpu > nb > reservoir

all parts from swiftech as below
MCRES micro > MCP655-B > 2 x MCR220-QP > Apogee GT > MCW60-R > MCW30 > MCRES micro

some pictures:















well, i haven't got the time to actually proper set the kit n i also need some time to set for new hardware i just purcased... however temp has been good showing drop of about 6 to 7 degree when cpu idle, load temp drop a massive 13 to 15 degree... while the gpu benefit the most in this wc project, idle temp drop of more than 15 n load temp is even more impressive, below 50 degree... it was around 75 degree with ori hsf...

i'll take some more time to take a better look at this kit n see if i can improve the temp of my rig...

This is just so nice .... I wonder how big is the case to fit in dual rad ...

anyway from the result it's just impressive ... make me drool to get wc ...

but too bad no financial capability at now ...

nice one there Hahanoclue.
i just ventured into water cooling too.
my temps dropped by about 20 degrees on load.
this is really the true power of water cooling

Good to hear that more people is joining the WC wagon. Hehe..

Actually, IMO WC is a must if u are a quad user. Too hot for an air cooling to handle.

@HaHaNoCluE
You can gain better if u use a better block for your cpu and GPU.

Currently I am using a modded Alphacool NexXxoS XP CPU Block for GPU. Its worked MUCH MUCH better than MCW60 on my 8800gts cuz its have bigger surface area. MCW60 is too small to cover whole surface of 8 series GPU.

@DaRkSyThE
May I know ur setup?

maybe u can start up with simpler kit at 1st... with nirox pump, n pvc tubing... coz those can save a lot in cost... i still can't find a suitable case yet but i'm trying to figure out if i can fit everything into a lian li v2000 case... but atm, i'm having my fren to do me a small case to fit the rads n pump, n will try to locate the smaller case to the bottom of my existing case... maybe i'll get it screw together too, so i can move them easily n it'll looks like 1 piece...


me a newbie too... but here in lyn has a lot of very good sifus willing to guide, thanks to them all.... hehehe...

i'm not sure bout that, to be truth, i might not pick the best parts but maybe it's the best of what i can get n with the amount of money i can pay... i don't know too much knowledge about all this wc parts, but i know i won't get lost with compatibility issues if i get all from in 1 brand... i was planning for mcp355 but it only uses smaller id barbs... but for the gpu, i guess i'm pretty happy with the performance, i mean mine is running at factory pre-oced at 550/1800 n load temp has never go beyond 50 degree mark... compare to last time of 75 or near 80 on hot days... o ya, with the nb block, i can now drop the vmch slightly lower too... isn't it amazing??? maybe now i can go for higher fsb... hahaha...

hey frankie.........damn cun la ur wc cooling set up

rlhc17,

hahaha, can u remember the mobo???

tq tq tq for all comments, n i'll try to shorten some tubing of my loop...

where is ur pic for noctua on vga..XD

Lol... Will post real fast

noctua on VGA??? huh... that's really big project...

@Hahanoclue, thats a cool set there...
am i getting poisoned? yeah?
but why do i havta WC my pentium d? havta save more money for a better proc,mobo,gc...haihh...then only can think for WC...
Still a student, wish if i'm working...lol

yah it's so cool and ther performance as well ..

make me decided to go in wc as well ..

but can't afford like waht he's having ...

oh really??? look at ur sig... nice hardwares...