1.5vcore..

hehe

so low one...mine not so good...1.55v can only hit 3.6g...but not stable...but then again, i dun have 11x multiplier

hey bro remy,ur Q6600 ah,hot or not?
mind to share with me?

hey to be truth... c2q faster than c2d a??? i mean i dunno if xp/vista can utilise so many cores... soli a noobs q... hehehe...

@tAmpOi

update please =)


This post has been edited by eXtreme™: Jul 5 2007, 09:42 PM

Not bad bro. Try 500x7 liao.

Obtained this from few hours of benching.

This post has been edited by irangan: Jul 5 2007, 10:41 PM


Attached thumbnail(s)

i think i can have that for breakfast, lunch, dinner and the in-between snacks with that result...yummy!

---

Added on July 5, 2007, 10:45 pmC2Dx2...what wud u expect...but the temp is not 2xC2D thou...idle around 44-46@400x8@1.38vcore bios/1.36vdroop...load around 70ish...maybe later on the temp might slightly go down after the as5 properly sink in...

This post has been edited by remysix: Jul 5 2007, 10:45 PM

wowee!! ln2? dry ice?

*gulp*
wow, with results as crazy as this, i think soon we can't use super pi at 1M already ...
should at least go for 2M/4M ..



This post has been edited by mmohdnor: Jul 6 2007, 01:05 AM

finally able to break below 12s PI

will try after back from schoool xD

Good clock there What's your ram timings though?

This post has been edited by tAmp0i: Jul 6 2007, 09:19 AM

extremeocer, did u 1:1 between RAM and FSB? What ur timing though. SuperPi very sensitive to RAM rather than high clocks FSB.

Didn't take screenie of the ram timings...but they are running 1:1 at 1064 5-4-4-15. I don't have a OCable rams, so the only resort is to loosen the timings to run 1:1. someone pls loan me a pair of good rams please

Genting would be a nice place...but think the temps there around 18-20C not good enuf but adaquate for cascade cooling as it helps prevent condensation.

just a fast question for the pros...sifus...i wanna ask is that is it fsb value oc liao higher then the corespeed means is better?

let say like 500x9 = 45 and 470x10 = 47

with 47 higher then 45 for the corespeed but fsb 500 higher then 470...is this mean fsb is more important than the corespeed? which is faster? or we must test with programs?

Yea, but great for air cooling.

If tested with SuperPI, 4.7Ghz will be faster, because of higher processor speed. If both at same speed but with different configuration in between FSB and multiplier, eg. 400x8 and 457x7, the latter one will be faster.