test rig:
e6600
abit ab9
zeppelin ddr667 512mb x 2
oc:
FSB: 356MHz (3.2GHz)
SPD: 1:1
vCPU: 1.3625 (default: 1.3125)
vDDR: 1.90 (default: 1.80)
vMCH: 1.25 (default)
vICHIO: 1.50 (default)
idle temp: 43 celcius
SuperPI (1M): 16.015s
SuperPI (16M): 17m10.859s

I run prime95 n toast together once n after 2 hour it reboot. no msg, nothing. wat happen? (playing powerdvd too).

i dunno how to set prime95 coz i'm noob here. how to run multiple prime95? i tried installing 2nd copy but it detected 1st copy. wat should i set prior running this program. i just click "torture test"... sorry for noob question coz i tried reading the prime forum (msssmmger, haha can't spell) but wow they r too gud n i dun understand 85% wat they meant... any1 care to teach???

tq..

test rig:
e6600
abit ab9
zeppelin ddr667 512mb x 2
asus NX6200TC (64mb on board, waiting msi 7900gto)
hitachi 160gb sata2
acbel iPower 550W
panasonic dvd-rw sata
oc:
FSB: 360MHz (3.24GHz)
SPD: 1:1
vCPU: 1.4375
vDDR: 2.10
vMCH: 1.40
vICHIO: 1.65
ram timing: 5-5-5-15
idle temp: 43 celcius (room temp is 25 celsius)
load temp: 59 celsius max (orthos, large, in-place FFTs - stress some ram)
SuperPI (1M): 15.937s

disable: C1E
EIST
VT

PD stock cooler.. 2300+rpm (coz sumone said PD stock cooler better, so i try lor, i oso no idea, hahaha)

now i up all voltage oredi...

i able to run stable (prime95 n toast together for 8 hours but lazy wanna continue), SuperPI 32M 18m25.453 with FSB 334 (3.0GHz) n ram timing 4-4-4-12, all stock voltage. run it for days..

i dunwan to set voltage too high... so wat should i do?? which should i detune 1st when if this setting oredi run stable?? i'm using orthos now.. no idea how to use prime95.. orthos easier.. can't use TAT coz this is e6600es from nakata.. i wanna try to reach 3.6GHz (fsb 400)

is vICHIO = vFSB?? how come i can't find vFSB in my bios??

my pc still running orthos, so using laptop to go online.. can overclock laptop kah?? dell inspiron 510m, more than 18months old oredi..

tq tq for feed back..

* moderator... soli i post at wrong place.. tq for moving it here...!

This post has been edited by HaHaNoCluE: Feb 6 2007, 04:40 PM

me will go kingston hyper-x... thought corsair xms2 is cheaper than hyper-x now??? i never oc my ram... maybe only little so dunno much bout ram but 3.2ghz (around 360 fsb), any 667 ram will do mah... but if going super tight timing, divider than... no idea lor...

i'm using ab9 with e6600es, now oc at 3.006ghz with stock voltage n zeppelin 667 (4-4-4-12) rams without any problem (run superPI, prime, orthos, toast, occt)... i tried 370 fsb but only manage with 1.5 vCPU, 2.2 vdimm, 1.40 vmch n 1.65 vICHIO... stock cooler... i didn't bother to change the hsf coz i'm in aircond room, so till it hit over 70 celcius than i'll change... have any1 tried higher fsb with their e6600??? especially es??? i tried at 380 but i max out the vmch n vichio with 1.56 vcpu... n 2.3 vdimm... i passed superpi but failed orthos n the rest... planning to change to hyper-x 6400... coz i'm only wanted to max out at around 400+ fsb... can it be done n has any1 did it b4??? pls share ur experience... tq...

i'm more interested with the mobo can go more than the proc so maybe here v can discuss it??? i can get a lot info for ds3 (mine still RMA) n 965pt ther but seems like not many ppl using abit n not much info supplied in ther... any abit user care to share???

finally i can run my pc on e6600 @ 3.6Ghz (400fsb) but at 1.6875vcpu!!! it passed SuperPI n orthos (less than 1 hour n lazy wanna wait) with stock HSF but open side panel n got 6 units of 80mm fans blowing (powered by another PSU)... using kingston hyper-x 6400 (spd 1:1, 4-4-4-12 @ 2.0vdimm)... but i lowered it back 333fsb with stock vcpu, vmch n vichio but vdimm at 2.0v spd 4:5 (ram clock at 832.5MHz)... OC at bios... how to clock to over 400fsb with lower vcpu??? can be done??? my oc skill very limited only...

helps n comments needed

proc: e6600es
mobo: abit ab9
ram: kingston hyper-x 6400 ddr2 (512mb x 2)
hdd: hitachi 160gb sata2
gc: msi 7900gto (flashed gtx)

setting 1
oc: 370mhz fsb (3.33ghz)
ram: 370mhz (1:1)
timing: 4-4-4-12
vcpu: 1.5125v
vdimm: 2.00v
vmch: 1.25v
vichio: 1.50v





it idle at 41c (table fan + air cond) but 45c (air cond) without table fan.

i tried lowered the vcpu the but the system became unstable n couldn't run orthos. any idea? i'm using running this in my room now with aircond n room temp is 24c. using stock hsf but open side panel n with a table fan blowing directly to cpu. waiting for new cpu cooler!


setting 2
oc: 400mhz fsb (3.60ghz)
ram: 400mhz (1:1)
timing: 4-4-4-12
vcpu: 1.6875v
vdimm: 2.00v
vmch: 1.45v
vichio: 1.70v



at 400mhz fsb (3.60ghz) @ 1.6875 things became nasty. it idle at 50c (very low aircond, room temp is 28c + 6 low rpm 80mm fan blowing direcly) in my ofis. i have'nt try to lower vmch n vichio. this setting passed orthos for 1+ hour but lazy to continue. i wanna know if anyway can lower the vcpu? it's a bit crazy at nearly 1.7v. will better hsf help lowering vcpu?

both setting passed memtest.

to all sifu out ther...! is it normal to go above 1.5vcpu..?

thank u...

as stated above post.. will lowering temp lower the v core?? i read a few of urs oc result n u guys seems to be able to run at very low v core... not to mention those who r able to undervolt their cpu.. what is the guideline of normal oc v core?? i found temp guide but v core guide any1???

wah... 450fsb @ 1.35v.. ddr900 4-4-4-7?? pass memtest, othos?? but y 18.203 in super pi 1m test?? isn't it a bit slow?? but really amazing can do 4-4-4-7 on ddr667 value ram.. i tried a few value ram but hard to passed 850mhz without high vdimm (at 5-5-5-15).. but urs 2.4vdimm oso a bit high huh.. but my knowledge with chipset is oso very very low.. near nothin.. lol..

burn in.. .. how long should this ram n proc burn in should take?? is dat means over volt it then let it run for hours or days then try lower the volt??

1.45 @ 400fsb still high?? mine at 1.5125vcpu only 370fsb x 9 oso e6600es from nakata.. if i push to 400fsb will need 1.6875vcpu wor.. but y u guys lowered the multiplyer to 8 leh?? better ar like dat?? i use everest ultimate.. or abit uguru software for temp monitoring.. mine proc got problem kah?? y nid so much vcpu?? i can lower vcpu but can't run orthos.. super pi, sdmark05, everest n sandra bench all ok.. dunno y my proc so hungry??

burn in will actually help lowering the cpu voltage??? how to burn in?? jus run it in orthos for few hours or days, then set lower vcpu n run orthos to try if it stable?? i'm not really sure of r\this run in process..

sifu pls explain, can't find in google.. tq..

will try better OC attempt next week when i got my new CPU cooler coz at the moment still stock cooler only... uguru is very easy to use... but only use it to try oc attempt once at a time... if fail, next reboot will return to previous good setting.. so no need clear cmos.. adjust uguru till limit then only use bios to adjust ram n some minor adjustment... can even use uguru to control all fans... but any1 know how to adjust vNB n vFSB???

i dunno if my case is normal, i run my pc, e6600es for omoz 1 month at 370fsb 1.5125 vcpu, then i finally got the artic freezer 7 pro hsf (all d way from OZ), installed it yesterday n cpu temp drop 5 to 6 degree... (nothing changed except hsf) but weird part is, i'm able to lower my vcpu to 1.4875 n later to 1.4625.. i tried lowering my vcpu b4 but all failed orthos within minutes.. so is it because of cooler cpu or wat?? at the moment cpu temp is down to 37 idle n 56 load.. (previous 43 idle, load 68, vcpu 1.5125) can be lower if i set the fan to spin faster.. i'm in air cond room.. room temp is 28 (not cold)..

any idea??

dunno y cpu-z n lots of other software cannot show correct voltage.. use the software include wif ur mobo..

---

Added on March 8, 2007, 4:11 pmburn in?? i really have not much idea bout this burn in thing.. u mean running the proc for long time then maybe can lower vcore?? how to burn in ram huh?? can teach me??

This post has been edited by HaHaNoCluE: Mar 8 2007, 04:11 PM

any idea wif my setting?? the vcore drop aldy to 1.4625 but it still seems high compare to most of ppl here..

ram is kingston hyper-x pc6400 (ddr2 800)..

huh.. i tried to run orthos with 400fsb x 9 (e6600es) @ 1.6875vcore (but uguru shows 1.64) n orthos failed after 20 minutes, previously it can run for hours.. load is 74 DEGREE...! is that means my proc is only getting 1.64vcore?? i really wondering wat happen to my proc.. it require less vcore to run at 370fsb x 9 (from 1.5125 drop to 1.4625) but now it seems like require more to run at 400fsb.. i tried ds3 before but it doesn't seems to go much further too..

my mobo only have vMCH n vICHIO (which i dunno wat it is).. i increase both 0.2v.. no nid say sorry, i'm not hardcore fans of anything, hehehe.. anyway i used to buy a lot of abit mobo last time, then this 1 came out n review quite good so i buy lor (ds3 went rma).. wanted to get biostar at 1st but can't find in sabah.. n this a bit got heat pipe..! hehe.. anyway, thanks for all the help.. any tips, hints or posibilities.. pls juz post up..

seen a website that a person did 533fsb x 7 with e6300 + abit ab9 pro n this guy is not sponsored or reviewer.. he's nick is norz or sumthin similiar on xs forum n vr-zone forum n abit forum.. anyway, any1 here had any experience with vmodding mobo?? after vmod how to set the value ah?? i mean if i set 1.4v then real value might b 1.6v rite then how if i wanna change??

anyone tried or having L631A batch of e6600??? i trying 1 but it doesn't do any better than my e6600es... i uses lower vcore but produce same amount of heat (temp in celcius)... currently it's running at 370fsb @ 1.4000 vcore... (e6600es/370fsb/1.4750)... but both idle n load at same temp... is my poc bad???