Artery Nugget 50W battery comes at 1000mah with TC.

Mini Volt 40W battery comes at 1300mah with NO TC.

both are small, size almost the same, different finishing, but the Volt comes with CF Sticker which is really cool caz i owned the Red Mini Volt.

based on my experience with the Mini Volt, it has 3 levels of firing which is Soft, Standard and Power, with slow to medium to fast firing ramp.

meaning, the time taken for the mod itself to provide the power to reach the Wattage set.

by comparing my mods, Evic VTC Mini, Movkin Luggy and Mini Volt:

all at 13.5W, set the Mini Volt at Soft Mode, all perform on par.

same wattage, Mini Volt at Standard Mode, the Mini Volts performed way better then both Evic and Luggy. to get both Evic and Luggy on par with Mini Volt, i ramp up both Evic and Luggy to around 15.5W-16.5W(cant remember which values for both, i think 16.5W).

same wattage, Mini Volt Power mode, it made both Evic and Luggy bite the dust. need to ramp up both Evic and Luggy to 18.5W to be on par with the Mini Volt.

though small, it packs a punch on a 1.0 ohm coil on my Pico atty.

my style of vaping, the 1300mah Mini Volt last me during day on full charge, with just enough battery life when i reach home for the next charge cycle, at i takes around 3hrs to fully charge em.

your mileage may differ depending on your atty setup and your vaping style.

Perghhhh... Castle Long Reserve V - RM 160....Sakit~~~

Wow, thx bro for the extensive explanation. I usually vape 0.5-1 ohm. firing around 13-15 watts .. alot of good reviews on the volt.. but the nugget really catches my attention on the TC

Perghhhh... Castle Long Reserve V - RM 160....Sakit~~~

and that is how i lost my friends.

Artery Nugget 50W battery comes at 1000mah with TC.

Mini Volt 40W battery comes at 1300mah with NO TC.

both are small, size almost the same, different finishing, but the Volt comes with CF Sticker which is really cool caz i owned the Red Mini Volt.

based on my experience with the Mini Volt, it has 3 levels of firing which is Soft, Standard and Power, with slow to medium to fast firing ramp.

meaning, the time taken for the mod itself to provide the power to reach the Wattage set.

by comparing my mods, Evic VTC Mini, Movkin Luggy and Mini Volt:

all at 13.5W, set the Mini Volt at Soft Mode, all perform on par.

same wattage, Mini Volt at Standard Mode, the Mini Volts performed way better then both Evic and Luggy. to get both Evic and Luggy on par with Mini Volt, i ramp up both Evic and Luggy to around 15.5W-16.5W(cant remember which values for both, i think 16.5W).

same wattage, Mini Volt Power mode, it made both Evic and Luggy bite the dust. need to ramp up both Evic and Luggy to 18.5W to be on par with the Mini Volt.

though small, it packs a punch on a 1.0 ohm coil on my Pico atty.

my style of vaping, the 1300mah Mini Volt last me during day on full charge, with just enough battery life when i reach home for the next charge cycle, at i takes around 3hrs to fully charge em.

your mileage may differ depending on your atty setup and your vaping style.

As u know, Five Pawns extracts flavors from the actual base ingredients. To get as close as possible to the ori's flavor, you'll have to do the same where feasible. Just use TFA's AP, Kentucky Bourbon and Brown Sugar. The remaining flavorings can be DIY extracted for much less than the cost of 1 bottle of castle long.

I've already gone in-depth regarding oak ageing and Madagascar Bourbon vanilla extract so u know what to do there. Suggest making fresh coconut meat and toasted desiccated coconut extracts separately to be combo-ed.

For almond extract lightly toast almonds first, then remove the skins and discard. Mortar and pestle into smaller pieces (I avoid using a blender mill cos I don't want heat) and then add to yr VG.

Got a feeling that 1.5% Himalayan rock salt saline wouldn't hurt; will try that out in future versions.

Joyetech came out a cuboid mini 80w mod built in batts.

The notch coils looks good tho, rebuilding the coils seems easy too

Got some crazy prices here.
http://mall.shopee.com.my/shop/?sid=356158...#shopid=3561581

I still refuse to buy DNA200 though.

Not a fan of DNA200's too?
Personally, I usually fire below 50 anyway so all the other mods are overkill for my usage.

guys...if using TC mode,should i count amp limit ohm law like we use in wattage mode?
or its very very safe to use any watt per second in tc mode? my device support as low as 0.05ohm.

Dont need to. The mod will throttle when it hits the temperature.