changed the fan opposite way edi, temp still almost the same,just that the cooldown is slightly faster...
applying too little thermal paste will cause the temp high or not?
i really can't figure what's the prob edi

Hmm...
This shouldn't be true.

As my previous Pentium D 820 runs at 65degrees on idle on stock cooling with intel stock thermal paste.

When i change the heatsink to Noctua NH-U12F, the temps goes as low as 40degrees. That means 20 degrees differences compared to stock intel heatsink.

I wonder what's the problem with your system.

i also pening kepala and afraid to play game for the moment...
my stock hsf idle is around 47, max load also max 55,now noctua like very unstable
could it be the temperature software inaccurate?

i think its sensor or software prob, pm me ur email n i will send u a copy of lavalys ultimate edition

ps. thanks shawty for reminder

This post has been edited by bryanyeo87: Jul 3 2007, 11:40 PM

Post Edited for good faith.

This post has been edited by sHawTY: Jul 3 2007, 11:36 PM

P4 2.4 precott, stock hsf
idle 60C, full load 70C
terrible, this month weather very hot !!!

that's hot....
i think u better reapply again the thermal compound, or u need to make some cables arrangement inside ur case...
My previous prescott, maximum idle temp was only 45C, not matter how hot the weather, but normally will only run at around 40C... Full load will be 57-60C...

Last time i clean the casing, put cooler master nano fusion on stock hsf
idle 50C full load 67C, also very high temperature, my stock hsf is 3500rpm

Hey guys, could use some help.

Firstly, i'm running a positive airflow pressure, is this better than a negative pressure?

My rig is in my siggy.

All my fans are Evercool Spider (air filter), here's my current setup :

80mm Upper Side Intake
80mm Rear Intake
Silverstone Strider ST400W PSU 120mm Outtake (top of case)

Temperatures i'm getting are (based on Speedfan):

temp1 - 38c
temp2 - 34c
temp3 - 43c
hd0 - 40c
hd1 - 40c


Is that ok?


I'm planning to add on a 120mm Intake Front and then changing the rear fan to 92mm OUTAKE. What do u guys think

Okay this is may not look like a problem but it is. My room temp idles at 25C the time temp of CPU taken.

The problem now is my CPU temps is 22C

Thats almost impossible. It's a e6320 at stock speed and with thermalright ultra-120 extreme. Currently formating the hdd so can't check with core temp but reading was from bios cpu health. My 965p-ds3 comes loaded with F10 bios.

Btw the thermalright ultra-120 extreme is running fanless but gets air directly from the rear of my Lian Li a05.

hahha ...DS3 is never accurate with the temperature reading ...

I had always suspect my old DS3 temperature reading ...

It's always too low to be true... throw that board away and get a DFI Dark Infinity ...

It's a better buy .... hhaha just suggestion don't take it too personally ..

Aiyak! True ka? I just ordered a P35-DS3. Hopefully gigabyte has already corrected the problem....

ayak bro get P35 DS3P larr.someone said to me P35 DS3 got a very bad v-drop

ds3 now using F12 right?does it fix the temp problem?read more accurately i mean?

This post has been edited by styloe: Jul 18 2007, 03:10 AM

Never came across the V-droop on this mobo before.

P35-DS3P more expensive la. This mobo is value for money with performance at the same time!

hmm ... there were many DS3 user before but seems like most gone for DFI or some other mobo liao ..

Anyway one here with DS3 and updated bios to F10 to share some of their view ...

I'm running a p4 3.0 ghz with a volcano 7+ hsf. at medium speed and running quite a bit of applications, temperature hits 52 celcius. is that hot?

That's ur load or idle temp bro .... ??

If it's ur idle speed then it's definitely hot .. while if it's ur load temp it still consider hot .... but still on the safe side ..

btw can u specify ur P4 is which type?? The temperature of different types generates different heat level...

That's the picture of my rig.

Specs is in my siggy. It's a Socket 478 P4 3.0Ghz HT 800FSB.
Idle temp with medium fan is 47-48 celcius

i think if load la if ur running quite no of apps.its normal since opps ur 3.0 is prescot or northwood core my fren?if prescot quite impressive @normalla..

sorry it's northwood.

the best idle i've gotten is only 44 celcius. i want it lower
maybe i should change the hsf? super noisy also this hsf :s

any ideas?