this is wad i got with pc wizard 1150 all the time even when i run some programmes.


anyone know of a more accurate software for fan speed and temperature?

hmm does ur mobo comes with system performance monitoring utility ??

if yes u could try it, it would be more accurate than Speedfan ..

eh,80k u here say ur fan is good ah?cheh....for me,it's nothing....
try and see my rocket!

---

Added on July 25, 2007, 6:19 pmis the TR-SI97 that good for Barton?

@bryan,my casing is very very good air flow one,what is the idle temp for soc A?

pls tell me an estimated temp.

This post has been edited by AceCombat: Jul 25 2007, 06:19 PM


Attached thumbnail(s)

yea ur fan can fly ur rig up to the space with that kinda speed

@ AceCombat

im getting the same thing too with my speedfan after upgrading my rig...

havent installed the mobo hardware monitor yet though (PC Probe II)

but for my office rig (cheapo MSI LGA775 mobo) i have to run the MSI monitor first...then only speedfan can detect correct values. so ill have 2 hardware monitors running simultaneously.

could be i need to install PC PRobe II first for speedfan to NOT go psychotic

It would be better with the PC-Probe and do remember to get the latest version ....

coz it would be more accurate and less stability issue...

can pc probe be used on system with different mobo?

PC Probe as far as i know is only for asus....i dont think u can use PC Probe for other brands.

hi,need help here..i want buy a cheap casing wif good airflow,can suggest me one?my budget around rm200 minus

Get a CoolerMasterElite and add on with one 12cm fan ,,,,

There u go one of the cheapest dual 12cm fan's case ....

Btw the case cost only RM110 .. so add up a case fan RM20 to RM30..

In total it would be RM150 only ....

thanks doom will check it out

Galaxy Graphic card 8500 GE ( Factory OVerclocked ), Idle tempeature 64C, load 74C. any idea ? Guide to reduce the temp ?

Using Galaxy Stok Fan !!

that kinda temp is kinda a norm huh? already oc and is your com in an non-ac room? changing to a 3rd party cooler or improving your casing air flow should help.

Basically in ur case there's nth much could be done coz the card being OC too much by manufacturer...

The best option is to change to third party heatsink .. Artic Cooling S2 which is compatible with 8500 series...

Apart from that, make sure there's aiflow movement within the case ..

product Link Here

get a CM5 also good using 120mm intake and exhaust fan

its OK wat...its normal not that hot.if reach more that 80c then u'll worry.no need to change ur fan.if still wanna change get the cm viva pro or zalman vf900.do advice ready to fork out some cash for it

---

Added on July 28, 2007, 2:11 amYes its that good my fren.if im not wrong(plz correct me ere) the very super bestest for socket A

This post has been edited by styloe: Jul 28 2007, 02:11 AM

hey guys 51C CPU temp.. is normal or abnormal?
Btw, is possible to change the fan speed? my fan speed is 1500+ rpm only.
PS: no full load.


This post has been edited by KrsNIK: Jul 30 2007, 07:49 PM

That's high.
Incredibly high.

Mind telling us what kind of processor are you using right now?

Intel processor p4 2.8ghz
intel mobo soket 775
so high ar... die die
wats temp considered as normal?

This post has been edited by KrsNIK: Jul 30 2007, 08:02 PM

That must be a Pentium 4 520 i think.
Since it's a Pentium 4 2.8GHz LGA775.
It's using a prescott core. [A.K.A. PresHOTT]

Pentium 4 processors shouldn't go that far even on stock heatsink.
IINM, it should be in the area of 45 - 48 on idle.

Perhaps there's a problem with your casing airflow.
Or maybe your stock heatsink is clugged with a lot of dust.

Mind taking a picture on the internal of your rig so that we can advise you on what to do next?

sori, i don have the caple to transfer the pic.
well at the 1st, the temp keep in 47C, suddenly it shoot till 49-51C. Even i watch anime the temp shoot till 50.
i nvr close my side case and i jz clean it last few weeks, i din take whole heatsink out, jz the fan only. i don c there alot of dust inside it though.

is my fan speed slow? my fren fan speed is around 2.5k - 3k rpm. got any way to change the fan speed?