ermm there is alwaz the heatsink data collection thread u can go thru and fine the most suitable heatsink that suites ur needs.btw i think xp120 or xp90c shud do the job if ur on stock@non OC also if ur OC as well.also xp120 is default heatsink for s478 so no need to buy those adapter only need to fine a good CFM also silent since u want silent setup.just a suggestion.u can ask sHaWty for futher advice since he change his HSF like his undies so he knows which HSF is good and bad.bro sHawty jgn mara jk only

It's hard to get any replacement for socket 478 now days ...

if u could get hold onto any...Thermalright XP-120 ....

or

Just get thermalright P4 478 retention kit ..

Then u could use few of the thermalright cooler on ur board....such as HR-01 sreies and Ultra-120 series ...

what would be the better/best air cooling solution for non sli/xfire vga cards then a CM coolviva pro on x1950gt without blowing off like rm 200 or more?

checked google and i get funny answers =/

This post has been edited by bryanyeo87: Jul 20 2007, 09:13 PM

hmm why don't check out Artic Cooling S1 which cost only RM110 ...

performance is proven !!!!

hi,n00b here,wanna seek consultant for my old rig.

Athlon XP Palomino/Thoroughbred
MSI MS-7021
Cooler Master Aero/Ori heat sink fan

the proc idle at 53c,is it normal for soc A proc?

even i use CM or ori fan also this temp wor....no oc.

Can someone help me here?

Want to clarify is it normal or not as my new GC is quite hot

With casing on :
Idle : 66, Ingame : 76

With casing off :
Idle : 46, Ingame : 66

Is it normal or did I need to equip some cooling stuff??
Casing set is Icute (dunno what model edi)

Probelm probably lies in your casing airflow. When you're rig is without casing the temps are okay and rises 20 degrees in the casing.

You could either manage your cables properly. If the cables is not the problem but the casing has bad airflow, the only choice for better temps is by changing your casing.

Change casing =.=""" I'm thinking if I can buy some cooling stuff??

post some photo so that it's easier to judge whether it's case problem or just possibility of other issue ...

bro, are u absolutely sure? coz i dont intend on running it on passive cooling if i get the S1, will use NMB 140cfm x2 to blow it , but i nid to know, is it better then CM coolviva pro interms of heat absorbtion by the hf to cool off? coz apparently all over the net, i see reviews that CM coolviva pro is pwning zalman vf900cu?? o.0""

Arctic Cooling S1 doesn't work well with high CFM fans.
There won't be any differences at all even if u use high speed fans.
It's better to use mid-silent fans with it.

If you're long enough in air cooling heatsink, then you'll know why.
Any heatsink doesn't matter CPU or GPU heatsink that is originally made for passive mode won't work well with high CFM fans.

Examples: Scythe Ninja, Thermalright HR-01

So, don't waste your ear drum for hearing the noisy fans.

hahhah ,, you are really right bro ...

@bryanyeo87

You could verify with sHawTY also for the S1 since he's selling as well ..

but from most of the review laying around in the internet ... the performance is really absolutely no doubt ...

i know, i read the reviews on the net too lol...but accelero s1 with the turbo modules are performing worse then zalman vf900cu?? o.0"" and CM coolviva pro beats zalman vf900cu....

so i concluded that:

accelero s1 < zalman vf900 < CM coolviva pro

but those are reviews...maybe they got bribed to promote CM =/


Edit: I forgot to mention, my gpu has only 2 mounting holes, like 6600gt punya 2 mounting holes.

This post has been edited by bryanyeo87: Jul 22 2007, 06:21 PM

no one helped me

Alamak bro sorry didnt notice well if u have cash go look for TR SI97.i think it shud do the job.4 heatpipe sammore

aiyak sorry ace =p, like styloe said, u could try TR SI97 or get a higher cfm fan to fit the heatsink... or is ur casing having good airflow?

so any feedbacks on the accelero s1 (with turbo module) < zalman vf900 < CM coolviva pro? =b

This post has been edited by bryanyeo87: Jul 23 2007, 02:51 AM

for this wan u shud go to the graphic card thread la

already got la..in the 7 series thread and x1950 thread...both also like geleng geleng kepala, ur guess is as good as mine thng...eh who got a zalman vf900cu, come my house we do benchmark lol

why do i get readings like this? sometimes i got 3k+ 5k+ 10+ 16k+ when rendering. 24k+ can my fan spin that fast?

WTF seriously i dont think i know any fan that can do 80K?try using older version of speed fan or use pc wizard