Problem with temperature? Seek consultation here, DO NOT OPEN NEW THREAD
|
|
 Dec 17 2006, 03:12 PM
Return to original view | Post
#1
|
 
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong  
|
QUOTE(Xperthero @ Dec 17 2006, 03:09 PM) y u use small fan?try using 120mm front and read one way air flow..inifinity works damn great with two fan..Try get a silverstone or ac ryan fan . if put a 120mm fan in rear, how many RPM for the fan will be better? 3000rpm?   |
|
|
|
|
|
Dec 19 2006, 01:39 AM
Return to original view | Post
#2
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
2.8A is prescott instead of northwood, so the temp for prescott normally is higher, so ur temp can consider is low ald...
|
|
|
Dec 19 2006, 11:02 AM
Return to original view | Post
#3
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(irangan @ Dec 19 2006, 09:12 AM) i thought prescott is E version.. sorry, my bad, prescott is E revision. anyway, remember to remove the layer of metal zink from your stock cooler if any. it is very lower the temp. this tip is from sHawTY. work like a charm for me.  coz my previous 2.4A is prescott so i though 2.8A also prescott...  |
|
|
Mar 16 2007, 01:36 PM
Return to original view | Post
#4
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
How bout the temp for CPU?
When i refer to everest ultimade version, it list out temp for CPU, core 0, core 1, system... I just know Core 0 and Core 1 only, how bout the CPU, System? |
|
|
Mar 27 2007, 11:14 AM
Return to original view | Post
#5
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(spikeee @ Mar 27 2007, 10:40 AM) Erm guys, am totally a n00b at cooling. 1) whatever u can use to clean the dust inside the casing, like brush. When come to the fans, it depends on the casing u using rite now, whether it can put a 80mm fan or 120mm fan.i want to start improving the cooling within my system unit. my questions are the following : 1) What are the equipment that i will need to clean my system unit and install new fans? (canned air? mounts for fans? what size fans? etc) 2) Where can i get these equipment? A list of equipments that i would need will be very helpful, guys! Thanks in advanced! 2) most of the computer shops got sell those things.... |
|
|
May 9 2007, 10:29 PM
Return to original view | Post
#6
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Well, I not sure whether i ask in the correct place...
I would like to ask that whether a thermal compound like AS5 will expired? I have a AS5 where I bought it a year ago(IIRC..), so I not sure whether this thermal compound will perform the same like a brand new AS5 or its performances will be lower since it is already 1 year old...  Thanks for helping! |
|
|
|
|
|
Jun 4 2007, 01:06 PM
Return to original view | Post
#7
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
Wanna ask here, now my proc, E6300 idle temp is at 43-44, full load around 60C, normal? Previously idle is at 40C, after i took out my PSU and made sleeving, and i put it back, the idle temp became 44 already, dunno whr got wrong...
 I didn't OC my proc, all running at normal and using the stock hsf... |
|
|
Jun 4 2007, 02:56 PM
Return to original view | Post
#8
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(blessedvillain @ Jun 4 2007, 02:44 PM) Seems very good temperature you got there.... my idle only can go about 50C~51C ... somemore using a very good airflow lian li case and applied AS5. I'm using Acbel 450W...Wat PSU are u using currently? I had the same temp like u before when i was using my previous casing, idle at around 52-54...  But then i change to LL case, idle temp decrease a lot~  |
|
|
Jun 17 2007, 10:06 PM
Return to original view | Post
#9
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(amd_hardcore @ Jun 17 2007, 09:47 PM) WTA... actually u can clean it by using tisu to swap the old thermal paste... But i think using alcohol will be better, just not sure what kind of alcohol will be suitable... if i remove stock amd heatsink and want to put my new cm gemin-II... the old thermal paste need to clean with alcohol (anything) or i just clean it by my hand? hurrry want the answer tonite... |
|
|
Jun 18 2007, 06:11 AM
Return to original view | Post
#10
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(afosz @ Jun 18 2007, 12:44 AM) I'm using Vista, which software is suitable to monitor temp? SpeedFan still ok in Vista? Coz currently, mine not working well. Same goes to Everest Ultimate, can't detect any sensor though Speedfan 4.32 running well on my Vista. Same for Everest Ultimate Edition v4.00.976, no problem in detecting the temperature. Other choice will be Core Temp 0.95 and TAT...  |
|
|
Jul 5 2007, 10:48 AM
Return to original view | Post
#11
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(peng01 @ Jul 5 2007, 03:43 AM) P4 2.4 precott, stock hsf that's hot.... idle 60C, full load 70C terrible, this month weather very hot !!!  i think u better reapply again the thermal compound, or u need to make some cables arrangement inside ur case... My previous prescott, maximum idle temp was only 45C, not matter how hot the weather, but normally will only run at around 40C... Full load will be 57-60C... |
|
|
Oct 9 2007, 01:40 AM
Return to original view | Post
#12
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(Mr.Lonely @ Oct 6 2007, 03:25 PM) need help with my ultra 120 extreme..... i just change my intel hsf to ultra 120 extreme but i notice tat de temp. din drop as wat i aspected... Since u didn't attach it with a fan, so the temperature is totally normal.i just install de cooler according to de installation guide i apply de thermalpaste as wat de guide say...... but just i leave it without mounting a fan on it..... my intel stock HSF with 52C at full load and my Ultra 120 is 47C full load seem not drop too much Go buy a high RPM fan and attach on it, then u will able to see the different. |
|
|
Jan 22 2008, 03:17 PM
Return to original view | Post
#13
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(iman_210 @ Jan 22 2008, 10:51 AM) then which 1 should i rely on? getting confused here? seeing idle closing on near 50 made me for what I know, the bios' temperature reading, aka CPU temp, is the temp from the proc IHS whereas the core0/1 is the temp reading from the core. So, core0/1 temp will be higher and we more rely on the core0/1 temp.Correct me if i'm wrong. |
|
|
Apr 12 2008, 11:54 AM
Return to original view | Post
#14
|
|
Senior Member
1,634 posts Joined: Mar 2006 From: Ipoh @ Puchong
|
QUOTE(TSY @ Apr 12 2008, 09:44 AM) does anyone enable the PECI function in the bios? should be EIST or C1E, not PECI... coz after i enable it, my speedfan CPU temp is lower compare to last time, 42c drop to 32c now(idle), 52c drop to 42c(full load) btw using E6600, current setting is 333X9 @ 1.25V these 2 function are used to allow the processor to run at a lower voltage when in idle mode, hence the temperature will be lower at idle, but will be the same when in full load. |
| Change to: |  1.8054sec
 0.29
 7 queries
 GZIP Disabled
Time is now: 15th December 2025 - 09:24 AM |
Quote