I try last time to read via the ELM32, it cant get any info.
So far i didnt manage to get OBD reader which can read my 408. (except x431)

Elm32 can only read engine related.

For abs/esp and transmission you will need something better. Launch X431 should work. I'm using a actia at the moment. Run both diagbox and pp2000.

For O2 sensor it should show you which is faulty, either upstream or downsteam.  Pretty easy to replace.

I checked hfrom shoppee, there are variety of Launch X431. Would those below RM100 works?

Hi Peugeot bro,

Just bump into a Dongfeng Peugeot 1.6/2.0L wheel alignment specification sheet  that shows preferred Front Right hand side camber angle being more negative than that of Left hand side (aka unbalanced camber angles at Front), which imo isn't quite suitable for our Malaysian road crowns.

Anyone here has a typical wheel alignment spec sheet (or a computer screenshot or printout from a local wheel alignment machine) for 'local' or imported Peugeot (of whatever models) to share indicating similarities or dissimilar ......

or any Peugeot owner here having experiencing vehicle veering left when driving straight ahead with factory specification esp when new?

I'm curious and btw I'm not a Peugeot owner.

I checked hfrom shoppee, there are variety of Launch X431. Would those below RM100 works?

Elm32 can only read engine related.

For abs/esp and transmission you will need something better. Launch X431 should work. I'm using a actia at the moment. Run both diagbox and pp2000.

For O2 sensor it should show you which is faulty, either upstream or downsteam.  Pretty easy to replace.

wow .. mine to share more info regard actia ?
diagbox and pp2000 is install at laptop if not mistaken ..
been tot of that but i prefer something more easy .. 

The so called "fake" actia selling in shopee is useable, with some feature "locked" due to the feature/software is locked to Peugeot service center personnel. You will still able to do testing, read code, pair keys, and many more. Some features such as programming, repair manual, service box are not available unless you have authorize service personnel ID and password.

Yes what you will need is a laptop with USB port that run in any 32 bits Windows. Installation CD is normally included in the "fake" actia. Those actia is selling really cheap now since when China seller flooded shopee and lazada. Good for DIYer like us indeed.

If i can recalled correctly, steer to the left is the common issue shared by 408 owners. That was in Thread V1 or V2 if I'm not mistaken

nope .. is straight

Thanks bro, your leads has been very helpful.
Will check out more from V1/V2.

Can refer to this forum as well

https://www.peugeotforums.com/threads/veering-left.31952/

Dear guys,

Appreciate your advise the cause of  knocking sound, from my car each time I gently applied brake to a stop.

I intend to send in to SC , but seek you guys advise before sending in

My model is 408 2.0.

Thanks

Dear guys,

Appreciate your advise the cause of  knocking sound, from my car each time I gently applied brake to a stop.

I intend to send in to SC , but seek you guys advise before sending in

My model is 408 2.0.

Thanks

This sound maybe from defective or broken engine mountings.

Thanks SKYjack , and you too, Pugbunny.

Appreciate your advise.

Hi guys, havent posted here for quite a while.

Are there any reputable & reliable 3rd party workshops in Negeri Sembilan?

My 408T is almost due for service, plus need to diagnose ABS warning.

I used to send to Renautech, and since its PKP3.0, I cant simply cross state to send for service.

Appreciate your guys advise.

Thanks