fruitie : The guide I gave you is not a proper access point setup but it is easier to configure. Most user shouldn't have problem with this setup anyway.

Yeah, but noob like me still cannot setup.
Mixed up ONU and router.

I have DDWRT installed an older DIR615 (white with orange trim all around) from an old UniFi installation. Using it as wireless AP in the office and it works as intended.

Dahua. 720p. 6 outdoors n 2 indoors with mic.
They hit arnd 18-19max with mic. Without arnd 15.
Each of the outdoor around 2mbps with the indoor arnd 3mbps.

So gonna use second lower stream on the non important areas.

This post has been edited by cstkl1: Aug 4 2015, 11:15 PM

Just upgraded to Unifi 30 but getting this kind of speed : Download 12Mbs Upload 1.08Mbs

Call Tm they say my housing area cannot reach 30Mbs speed. max can get 10mbs++ upload 5-7mbs

Then ask me to call back customer service to downgrade back


Attached thumbnail(s)

Change router first?

yup wanted to swap one to test and see how it goes. Currently using TM router.

Connected through wireless or wired?

Try a wired Ethernet connection.

Yup. I'm using a wired connection.

Which Unifi capable router support custom DDNS service especially dns.he.net? or Google DDNS?

Currently using Draytek Vigor 2130n

Update
--------
Just noticed Asuswrt-Merlin do support custom DDNS script based... what about TP-Link? apparently their AC router is cheaper

This post has been edited by thankyou: Aug 5 2015, 12:35 AM

Asus routers come with free Asus DDNS. Works really well.

I have my own domain used as DDNS, that's the reason i'm looking for one support dns.he.net/google ddns... Unfortunately most of the router do not come with custom ddns...

Not sure if this is related but I noticed that when I was using the stock router, I was still able to bypass the YouTube videos with Proxmate.

However, after using TL MR3420, I cannot use it anymore, it keeps on showing "the uploader has not made this video available in your country."

It seems Proxmate is no long working though it is enabled. It refreshes for a while and the message pops up again.

What could be the reason? Any settings I need to make in my router?

Also how to enable IPv6? I tried the methods shown on Google but doesn't seem to work.

I was using IPv6 when using stock router.

Edit: Gave up on Proxmate, using ProxFlow now.

This post has been edited by fruitie: Aug 5 2015, 01:23 AM

anyone using iphone6? i can only get 10mbps on my iphone6 but my pc can get 30mbps. help pls

Yes, not with my with home pc.

A VPS insteas and yes, a mc server and also a few others.

guys. any news on the govt broadband initiative? prices are supposed to reduced in july 2015

MR3420 don't support IPV6.

most local TPLink firmware will not supported IPv6 and guest wifi network although the hardware support it at the first place.

Your PC is via LAN or WiFi as well? If LAN, then change router or use any other spare router as AP.
If PC is via WiFi, then change your WiFi channel in router. Some conflicts with your iPhone, I had this issue before with my iPad long time ago. That time I had to change to channel 6.
So, just play around.

No wonder.

thanks i'll try it tonight. i connect using a access point. test as below


ACCESS POINT
PC = 30mbps
phone = 10mbps

DIRECT to TM Router (WiFi)
PC = 30mbps
phone = 30mbps

surely its my cheap Aztech Access Point (those wall pugged ones) thats giving me the problem