Cooler air has a higher density, thus containing more oxygen per volume unit than warmer air(from WIKI). If the intake air is already HOT, given enough time to chill the air, the density wouldn't increase because that's the amount of air taken into the intake funnel So, basically you nailed it Heat wrapping doesn't change the combustion, but actual air intake temperature before the intake funnel does. In other word, make the atmosphere cold before you drive out, or plonk NOS To answer on behalf of cikgu CLASS OF tigabelas, water coolant is meant for cooling the engine down, has nothing to do with intake temperature. Older vehicle has a intake design of directing a funnel to exhaust manifold to suck hot air in the winter, whereas another intake funnel pointed between headlamp and radiator for cooler air intake during the summer On a general consensus, cooler the better but NOT freezing cold.

Have answered Quazacolt with honeycomb philosophy, not sure whether that will help. The trouble is, honeycomb structure will create more air restriction.

you haven't learn didn't you? you guys spamming overdone it liao. it's ok IF you guys spamming AFTER the thread ends, after 2500 posts, but NO, spamming until wanna close thread and open new thread just isn't right.

Nice discussion...seems like we on the topic of heat...

I've removed my heat wrap due to the foil was old and didn't have new one to put it back one. My OBD2 device kaput already so I can't get any temp reading after removed. I also have DIY wrap my exhaust header previously and this really made the engine bay a lot cooler it is obvious from the recent track day I took part in SIC. Before that without exhaust wrap when I pop the hood I can feel the heat just whoosh up in my face..even my friend who drive a persona commented that my engine bay didn't felt hot compare to his.

If we want to cool down the intake air there's another way which is to put a sprayer motor and a fine most nozzle drill and tap it into the air intake ram. Just make a switch that can make it spray a very fine must of about 1sec...this is what I had in mind just like IC sprayer

Nice discussion...seems like we on the topic of heat...


If we want to cool down the intake air there's another way which is to put a sprayer motor and a fine most nozzle drill and tap it into the air intake ram. Just make a switch that can make it spray a very fine must of about 1sec...this is what I had in mind just like IC sprayer

Sorry about that but happily for me it does say somewhere about the forum rules that english is the preferred language, so I don't feel I'm too out of place.
To put things is some perspective being caught speeding here like you chaps seem to love doing up and back from Genting would involve a fine something like AU$800, plus an automatic 6 month licence suspension and perhaps even having the car impounded. I fear being caught without the CC would be even harsher, it's far safer for us to have the car looking as stock as possible.

Guys, other than Intake temp, you can also add a cooler to your  EO & Transmission Oil. You will notice the difference in a long run.

here also wan tag me meh... 

yesterday i saw .. Toyota Veeyooss Saga BLM thread..

Guys, other than Intake temp, you can also add a cooler to your  EO & Transmission Oil. You will notice the difference in a long run.

No readings of temp? 

What you mean by cooler?

wahliu... so fast page 8 riao   
my gaga slow cannot pick up the speed 

Something similar to thisss

Got for Engine Oil and ATF

Engine Oil Cooler and ATF Cooler

Most Newer Versions of Proton Cars have this (ATF Cooler) like FLX, Preve, Suprimas.

But not in Gaga.

Depending on what you're competing against bro The amount of money 1 spend on Kampro doesn't reflect on the gains regardless

ur car ada ah?

ada   

ada   

Look beng wei if put the cooler on front bumper hehe

here also wan tag me meh... 

yesterday i saw .. Toyota Veeyooss Saga BLM thread..

If we want to cool down the intake air there's another way which is to put a sprayer motor and a fine most nozzle drill and tap it into the air intake ram. Just make a switch that can make it spray a very fine must of about 1sec...this is what I had in mind just like IC sprayer

No readings of temp? 

What you mean by cooler?

Something similar to thisss

Got for Engine Oil and ATF

Engine Oil Cooler and ATF Cooler

Most Newer Versions of Proton Cars have this (ATF Cooler) like FLX, Preve, Suprimas.

But not in Gaga.

fuiyo ganas ni.... my next year planning is ATF cooler... 

How mach the kecederaan?
Look geng wei if put the cooler on front bumper hehe