Just got X2 3800+ s939, the 2nd core is higher than 1st core about 10'c during prime...is it normal?

http://i5.photobucket.com/albums/y192/phas3r/cpuz_oc.jpg
292x9=2637mhz but
memory is 188
ht link 586
are they both too low? any disadvantages from it?

10'c is abit wierd bro, mine d most is 5'c. steppin?

forgot to note it down and lazy to take off the hsf to check

2.5GHz prime failed even @ 1.5v may due the 2nd core temp quite high 59-60'c compare to the 1st core which 49-50'c

improper contact of d ihs i guess, time to rip it off...

e6 i guess?

e4, same as yours.

dont think so as the temp for the core 1 is normal.

i think yas is older batch. newer batch of e4 (especially those 06xx) tend to be better clocker. neway, i'm runnun mine @ 2.4GHz only it's more than enuf for me, time for 2GB bro...

p/s: wat if u just stress d core w/ lower temp? will d hotter core effected?

if not mistaken, mine is 06xx batch...

tested on 240x10
idle
core 0 (36'c) & core 1 (40'c)

prime core 0
core 0 (41'c) & core 1 (41-42'c)

prime core 1
core 0 (43'c) & core 1 (52-53'c)

core 1 is d bad boy...

ever tried burnin core1 1st? if i'm not mistaken bro ah_paul tried before (burnin d stuborn core) coz he had silmilar problem. he managed to hit 2.7 w/ 1.425v iirc.

for dually i think heat is d barrier for higher clock, d amount of juice comes second...

hi Guys....

I just got my self a AMD X2 dual 4600+ Stock speed 2.4G, Socket AM2

I am thinking of overclocking it abit.. Anybody know how? I am totally zero in this new processor overclocking...

I am using a MSI K9N Neo board.
Any advise? if got step by step then better... he he he
thanks thanks thanks...

just hit a new record with my old sempron 2500 E6 socket 754:

default speed at 1.4GHz.
by lowering my RAM speed (which hurt alot in performance) im able to get 2.250GHz.

Hi there...
I try to run CPU-Z on my computer and it did but i have a few question. How come my PC never sate any name for the "Code name"?

This goes the same for the memory. In the Memory tab, mine only shows the type and size thats all.. didnt show the frequency and other stuff.... i wonder...
Do you have to register first to have all these features?

no, u dont need to register. all u hv to do is to go to http://www.cpuid.com/cpuz.php and download the latest version. i hv mine updated once there is a new version out, is like 2-3 months/1 new version.

thanks... i downloaded the new version and it works... he he...

hey guys i wanna overclock my amd can u guys teach me how?..what to raise up? in the mobo bios.my amd is shown in the signature..im using venice

read read read
Fundamentals of Overclocking

also
DFI Overclocking Guide - PDF download since you're usinng NF4 chip mobo

juz got my x2, n now doing some orthos blending @ 240x10, 1.45v
so far any speed higher than 2.5g = fail orthos

*will do more burn-ins

This post has been edited by e-jump: Apr 30 2007, 08:23 PM

may i know if the mobo require 24 pin, that mean i need to connect 24 in order to overclock? now using 20 pin only and din hav problem.. my psu oldskool.. overclocking seem impossible becoz of not enough power / stability issue..

not necessarily but recommended. to be on d safe side better not as u mite risk burnin not only d mobo or chip, other peripherals mite involved as well.

for now.. i already 24/7 for nearly 4 month(one sem).. not a prob happen.. just when i overclock a bit, the mobo did boot up.. only BSOD.. need to reset cmos.. then can reboot.. so my real q, do i need to buy adapter for 20 to 24 pin for overclocking.. b4 this using msi k8n neo2 ---> overcloak a bit no prob one.. can reach 2.3Ghz on air easily..