Most shops should have the Infrared meter to test it. You can try to ask the shop that you have tinted your car.

okay ~

Hi,

With the price of 1.6k you are able to get some pretty decent specs from the big brands like V-Kool, Raytech, 3M...

The common problems with local brands products are like bubbles, drastic drop down in heat rejection performance within 1-2 years time.

Hi Lord Gitsy, thanks for your input . Didn't know Windshield is local brand , can you PM me what can I get with similar price from Raytech ? B segment sedan .

Hi Guys,
Is it true, that the maximum allowed been reduced from 50% to 25% VLT for rear windows?
Are there any official articles on this?

Thanks

The rumour has been circulating around for some time, but still no official announcements for the time being.

Kind of new to this tinting thingy, what are the good tints going? Planning to buy a honda city s+.
How much would it cost for a good tint?
Sorry really newbie here.
Would appreciate if anyone could explain thanks!

Need some advise. Amongst 3M, V-Kool & Llumar .. which tint and grade offers the best TSER & security?

I have installed Llumar Diamond 6 for security in my previous ride but the heat rejection isn't that good. I'm looking for a change. Oh, it has to be within the VLT guidelines and for the front, Smart Tag friendly.

This post has been edited by McFD2R: Aug 21 2014, 02:21 PM

already used those 3... TSER the best for me is 3M...

Then you should visit our V-Kool showroom and have free demo & gift at http://www.v-kool.com.my/contact_us.php

After reading and browsing through several threads about tint, here's a bit of my personal opinion base on what I read and my brief visit to 2 reputable shops. Some of the technical information and package can be found in this threads, website, and other forums. I hope any sellers from these 2 companies is fine with it.

Firstly, I owned a 10-years old car with a reputable tint (Air Cool) which applied since then. That time, my tint cost around 1.5k-2k (it was long time ago), had my front windscreen tore once (due to JPJ inspection), and was warranted with new tint by the shop. After so many years, the tint has faded, reduce to 80-90% VLT. Nevertheless, it still reject heat quite well. Not as good as new, but definitely better than bare. Take about 15 minutes to properly cool the car under hot sun, and I can still drive at noon with half air-conditioning without feeling uncomfortable.

Anyway, I came across and visited Huper Optik and Raytech tint shop recently, surprise to find their shop to be quite close to one another. Here's my observation, purely opinion, for the price of ~RM2k:

Huper Optik
Side/Rear: C50S (security tint) / C50 (non-security tint, on paper slightly better heat rejection than C50)
Front: C70 (non-security tint, comply to JPJ) / Sech60 (non-security tint, slightly darker than C70)
Either combination is warranted by the company in case of fail JPJ inspection.

Another option is C40, which I find this to reject heat better than C50S/C50. This tint is slightly darker, not a security tint, and was not warrant by the company. I was quoted same price for both combination (C50S and C40).


Raytech
Side/Rear: CS85 (Security tint)
Front: V97 (non-security tint) / UL70 (non-security tint, upgrade)

There is another version, CS75 (many people ask about). I find the heat rejection is not as good, and not worth the saving from CS85.

I also came across some reader say V97 is a bit dark for driving at night, and the spec sheet did show slightly darker VLT than JPJ requirement. (I didn't notice the spec till I get back, so did not ask about the warranty with JPJ). UL70 seem to meet JPJ requirement, I guess that's why it is there as an upgradable option.

3M
I didn't visit their tint shop, but I got a chance to visit 3M Innovation Center near Shah Alam to see some of their products, including their tint. 3M tint is proven to have very good IRR, and they seem really proud of it (block out smartag).

One of my friend has 3M tint install on his car, he say the tint work really well and better out his previous tint (some local brand). To prevent the smartag issue, he reserve the top part of his car (where the dark tint normally is) for different brand of tint that do not has issue with smartag.

Llumar
I didn't visit their shop either, but worth mention as another friend of mine has it for 3 years now, and the tint is still as good since day 1. Only thing is there are quite a lot of fake Llumar in the market (so I have read), which is good cause it means the brand is growing and proven, just that consumer need to be more careful at selecting tintshop.

V-Kool
None of my friend has this. Not a very popular tint nowadays?

For those that like to know how does a car feel like without tint and have problem to access to a car without tint (for comparison sake with your newly apply tint), try getting into a parked taxi at noon and take a ride with it.

For 3m autofilm, the best heat rejection will be crystalline series and nano series.

Top up a little bit more from Rm1.6k you can get the top best series from 3M already. No need to worry fading or loss performance.

Generally there are a few type of tint.

Dyed or Colored Films
The most recognizable type of film is dyed or colored film which people are familiar seeing on cars and outdoor vehicles. This kind of film is colored during the melting and stretching process and works to absorb the sun's heat as opposed to repelling or deflecting it. It also reduces the ability of people to see inside which can deter crime and vandalism. Dyed film should not be used as a backing for thermal films as it can result in trapped heat.

Sputtered (Metalized) Films
Metalized films are infused with various kind of metals such as copper, nickel and aluminum among others. This metal deflects heat and sends it back to the outside. The metals are inserted into the film during the creation process and they are infused on an atomic level. When this process is completed there is an even distribution of metals across the whole of the tinting film. This kind of film is most often most common.

Hybrid Films
Hybrid films are exactly what they sound like. They take the best properties of both dyed and metalized films and combine them into one film which does it all.

Ceramic Films
New to the window tinting arena is ceramic tint films. These films are created using nanotechnology and are at the cutting edge of window tint technology. Ceramic tints reduce the amount of interference sometimes found in colored or dyed films while literally strengthening the glass itself once it is installed.

People familiar with the industry have seen much advancement in the field, but none as substantial as ceramic window tint. This is a very durable product that stands above its peers in terms of longevity. It also has the highest heat rejection levels compared to other materials. It has double the heat rejection of hybrid and dyed products. Because it uses no metal of any kind, there is no interference with technology found in modern vehicles.
It is also of a higher quality and strength than other materials, and has the ability to hold shattered glass together better than its competition.

Many of the high-end metallic films cannot compete with ceramic window tint when it comes to longevity and durability. It is much more resilient when it comes to fading, bubbling, cracking and the ever so common discoloring after years of use.

Those who are interested with Ceramic Tint click picture below for more information.

This post has been edited by Care-Man: Aug 22 2014, 02:21 PM

Hi all! Need help!

The car accessories people installed a tint brand FAMOS and charge me RM2K for it.

He said this brand FAMOS is under HUPER OPTIK, which isn't launched yet.

May I know any car tinter can verify this ?

Anyone heard of this brand FAMOS?

Thank you!!

you kena con man. sad to say. with that price can get huper optik tint original stuff instead of this house brand tint.

Are u a car tinter?

Is there any car tinter can verify this FAMOS brand?

The seller told me this haven't even been launched in Germany.

FAMOS S3 Complete.

I'm not sure but I feel this is not right, haven't launch summore can be found and sold at accessories shop, not at own huper optic company shop.

Too fishy.

no need to be a car tinter to know the good and branded tinted.
for me, only 3M, V-Kool, huper optic & Llumar are really a branded and using a imported tinted...
just make sure go to authorized dealer then you know..to avoid fake tinted...

Sorry to say. Both are not the same and not from the same company.