what's the max it can go? vdimm?

D9HNL chips?
from my research, i found most of em max can go around 480+/-(orthos stable)

I didn't test any further since it was not bootable at 500MHz first try... But you can get the result here

u really kiasu 1... lol... 1st try terus 500mhz... hahahaha... but feeding more vdimm or loosen the timing oso cannot a???

Aiye bro, if 500MHz also cannot then no point buy ler ... Better get some Ballistix or value D9GMH from bulk here
As for the Vdimm, higher doesn't get any better just caused instability. Not sure about me, need other forumers to confirm this as well...

This post has been edited by tAmp0i: Jul 17 2007, 12:29 PM

not even reach 500.. i thought single side chip is good for oc..
if see the naming scheme.. it's possible newer chip's name is D9HNP

You mean single sided rams with chipset only at one side right?
Well actually, it all depends on the chipset also.

If the chipset sucks in overclocking, one sided or double sided doesn't make any differences also.
So the most important things is the chipset itself.

Correct me if i'm wrong guys.

yup.. single sided..
i think this chip meant for 2gb per stick..
8gb could be possible in the near future...

PCB is important also, even cheap chipset if combine with Brainpower 6 layer PCB can also oc high lor.

Just grab 2 x 1 gb patriot ram from office the one without heatsink.... tested heatsink patriot no go... but this one looks cool
it is just ddr2 667 pc2-5300 cl5 value ram...
dunno what chipset is this but i can make it tight ram timing... but cannot reach 500mhz it stuck at 470 something..
vdimm 2.3 =x





Attached thumbnail(s)

guys, i would be getting the ballistix sooner or later, pc26400 800MHz.

jus wanna ask, is it safe to set Vdimm for this ram to 2.2V? somehow i feel like 2.2V is a little too high and probably could damage the RAM.. anyone can clarify this, as well as state the best Vdimm for this RAM? Thanx in advance..

IMO, 2.2 vdimm still under safety voltage.
Even my corsair xms running 2.2 vdimm 24/7, I think should not be a problem if u using with ballistix.


-pWs-

No. You're wrong.
Even if u have a ram with Brainpower PCB 8 layers but with crappy chipset, it won't go anywhere.

The main important thing to find on a ram first is the chipset.
PCB is just a plus point.

Offcourse it's safe.
Crucial warrantied all Ballistix & Tracer rams at 2.2Volts.

You worry too much.

This post has been edited by sHawTY: Jul 18 2007, 01:43 PM

DDR2 with 2.2V is actually much safer if got active cooling on it.

i've been using 2.3 almost a year for my ram.... =)

no doubt bout that... RAM safer if can get cooler...

me oso running 2.3vdimm for few months now, the ram is still ok...

But how do they know if you put a vdimm of 2.4v and it suddenly kaput?

I don't have the answer for that.
They have their own ways to discover it i think.

OIC. Some forumers say that they couldn't possibly know about it.

Anyway, going to get my new rig soon, will keep mine at 2.2v.