Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
130 Pages « < 94 95 96 97 98 > » Bottom

Outline · [ Standard ] · Linear+

 SATRIA NEO CPS Part IV, ~Limited Edition Force~

views
     
peejayboy
post Oct 27 2014, 09:19 AM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(xxboxx @ Oct 27 2014, 08:57 AM)
i'm using 205/45/16 with stock suspension. the larger gap is not noticeable. in actual it is just an additional 5mm gap, hardly can be noticed. but using 205 tyre give a wider surface area, better grip and handling.
*
Hey there, so meaning to say there will be an additional wheel gap of 5mm for rear and front after changing to 205/45R16?

5mm would be equivalent to half finger right. Because I feel the ride is quite high on 195/50R16 thats why was wondering whether to pair it with R3 springs.
xxboxx
post Oct 27 2014, 11:59 AM

The mind is for having ideas, not holding them
*******
Senior Member
5,261 posts

Joined: Oct 2004
From: J@Y B33
QUOTE(peejayboy @ Oct 27 2014, 09:19 AM)
Hey there, so meaning to say there will be an additional wheel gap of 5mm for rear and front after changing to 205/45R16?

5mm would be equivalent to half finger right. Because I feel the ride is quite high on 195/50R16 thats why was wondering whether to pair it with R3 springs.
*
my finger might be bigger than yours, so not the same. tongue.gif

best is take a ruler and see 5mm is how big if you don't know.
Max
post Oct 27 2014, 12:48 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 26 2014, 11:35 AM)
Ahh I see. Cause I've seen a few neo cps have the scrubbing issues like mine. Probably is manufacturing tolerances that causes it.

I plan to use the non cps intake snorkel and fit the older strut bar instead.
*
i also changed to campro snorkel and looking for normal campro strutbar.. hehe biggrin.gif
Max
post Oct 27 2014, 12:50 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(WarungKopi @ Oct 26 2014, 03:13 PM)
Hye,
My satria neo's headlight not very bright.
is it normal or something wrong with my car ?
*
yeah.. stock headlamp not so bright.. i changed mine to HID projector.
PM me if u r interested. link at my siggy below.. brows.gif
peejayboy
post Oct 27 2014, 12:52 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(xxboxx @ Oct 27 2014, 11:59 AM)
my finger might be bigger than yours, so not the same. tongue.gif

best is take a ruler and see 5mm is how big if you don't know.
*
Yeap mine is half finger for 5mm lol. Hopefully the wheel gap wont be too obvious if I put that size la

QUOTE(Max @ Oct 27 2014, 12:48 PM)
i also changed to campro snorkel and looking for normal campro strutbar.. hehe  biggrin.gif
*
I was thinking of putting the campro snorkel too but needa find a good mechanic to fix it cause there's a hole below at the old snorkel where it'll create a vaccum loss something like that.

Heard there's performance increase and fc reduce right

This post has been edited by peejayboy: Oct 27 2014, 12:53 PM
The Red Giant Warrior
post Oct 27 2014, 01:03 PM

New Member
*
Junior Member
13 posts

Joined: Oct 2012
From: Kuala Lumpur
QUOTE(angrysnail @ Oct 27 2014, 01:08 AM)
If u ask me,i still not satisfy with R3 lowered looks.stiil have a gap like 1.9 fingers(mine la) from 2.3?i think so..The only thing make ur car scrap the ramp is the R3 splitter.If you aware last Neo CPS 2010 model its already lowered without any sport spring and splitter.I believe proton already change the OEM shocks in this latest neo cps. hmm.gif
*
I dun like when R3 splitter scrapped the ramp sad.gif the sound makes my heart shatter to pieces cry.gif Interested to get R3 spring but afraid the splitter will scrap the speed bump then


QUOTE(afiqms @ Oct 27 2014, 07:43 AM)
Go for Michelin PS3 la, u wont regret. Best dry and wet grip. Dun be fooled by its asymmetric thread pattern. Currently used in my wife's Gen.2.
BTW I am using Yoko AD08R brows.gif
*
Wow nice tyre u got there drool.gif

Max
post Oct 27 2014, 01:09 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 27 2014, 12:52 PM)
Yeap mine is half finger for 5mm lol. Hopefully the wheel gap wont be too obvious if I put that size la
I was thinking of putting the campro snorkel too but needa find a good mechanic to fix it cause there's a hole below at the old snorkel where it'll create a vaccum loss something like that.

Heard there's performance increase and fc reduce right
*
the campro snorkel pnp only. only need to cut half the mounting 'ear' at piping.
the bottom hole can plug off or put hose (washing machine drain water hose) directed to front for cold air intake.

Attached Image


btw, i got 1 pair extra Pioneer Carrozzeria 6" 2way speaker for sale.
direct pnp replace stock speaker.
Attached Image Attached Image Attached Image
peejayboy
post Oct 27 2014, 01:37 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(Max @ Oct 27 2014, 01:09 PM)
the campro snorkel pnp only. only need to cut half the mounting 'ear' at piping.
the bottom hole can plug off or put hose (washing machine drain water hose) directed to front for cold air intake


For the bottom hole, what do you mean by plug off ? (lets say if i dont want to use the drain water hose method).

Wont plugging off the bottom hole create another hole? Btw, any differences after you install the non-cps snorkel? biggrin.gif
Max
post Oct 27 2014, 02:14 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 27 2014, 01:37 PM)
For the bottom hole, what do you mean by plug off ? (lets say if i dont want to use the drain water hose method).

Wont plugging off the bottom hole create another hole?  Btw, any differences after you install the non-cps snorkel?  biggrin.gif
*
i mean this hole.
Attached Image

or u mean other hole?
peejayboy
post Oct 27 2014, 03:24 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(Max @ Oct 27 2014, 02:14 PM)
i mean this hole.
Attached Image

or u mean other hole?
*
Yes, im referring to that bottom hole. What do you mean by plug off and how does it differs from putting a drain hose.

If i dont touch that hole does the snorkel still work efficiently? rclxub.gif cause i feel like installing it on my cps but i scared got negative effect if never install properly.

Paiseh keep asking you lol
apikkullah
post Oct 27 2014, 04:21 PM

New Member
*
Junior Member
10 posts

Joined: Jun 2013
i need some suggestion on installing UR bars. Thinking of getting the front strut bar. Anything else should i get? budget around 300. Or I should not get the front strut bar? suggest me something smile.gif


Max
post Oct 27 2014, 04:47 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 27 2014, 03:24 PM)
Yes, im referring to that bottom hole. What do you mean by plug off and how does it differs from putting a drain hose.

If i dont touch that hole does the snorkel still work efficiently?  rclxub.gif  cause i feel like installing it on my cps but i scared got negative effect if never install properly.

Paiseh keep asking you lol
*
stock setup got the L shape tube. thats for collecting water if water goes thru the pipe.. however, i think water cant even get in thru the pipe. even at the scoop there got small drain hole.. and at the bottom airbox also got small hole for water drain.

if put washing machine hose, u can direct the pipe to front where it can get cold air intake.
got someone blog doing the mod..
here: Intake sekunder

*credit to the blog owner.
peejayboy
post Oct 27 2014, 05:42 PM

New Member
*
Newbie
1 posts

Joined: Apr 2012
QUOTE(apikkullah @ Oct 27 2014, 04:21 PM)
i need some suggestion on installing UR bars. Thinking of getting the front strut bar. Anything else should i get? budget around 300. Or I should not get the front strut bar? suggest me something smile.gif
*
I did not use the FSB on my CPS because it is rubbing against my hood insulator and the intake snorkel...you can try and see if it happens the same to yours sweat.gif

QUOTE(Max @ Oct 27 2014, 04:47 PM)
stock setup got the L shape tube. thats for collecting water if water goes thru the pipe.. however, i think water cant even get in thru the pipe. even at the scoop there got small drain hole.. and at the bottom airbox also got small hole for water drain.

if put washing machine hose, u can direct the pipe to front where it can get cold air intake.
got someone blog doing the mod..
here: Intake sekunder

*credit to the blog owner.
*
Right and is it possible for me to ignore the L shape tube whereby I just leave it there as it is.

And do you mind sharing what are the feedback from using the non-cps snorkel? any difference to your car? icon_rolleyes.gif
angrysnail
post Oct 27 2014, 07:47 PM

SuperStars
******
Senior Member
1,413 posts

Joined: Aug 2009
From: Damansara
QUOTE(Max @ Oct 27 2014, 04:47 PM)
stock setup got the L shape tube. thats for collecting water if water goes thru the pipe.. however, i think water cant even get in thru the pipe. even at the scoop there got small drain hole.. and at the bottom airbox also got small hole for water drain.

if put washing machine hose, u can direct the pipe to front where it can get cold air intake.
got someone blog doing the mod..
here: Intake sekunder

*credit to the blog owner.
*
nice sharing mate,the snorkel not really into me but the adjustable spoiler for neo is really genius invention! drool.gif
voscar
post Oct 27 2014, 10:38 PM

Regular
******
Senior Member
1,526 posts

Joined: Dec 2005
QUOTE(Max @ Oct 27 2014, 04:47 PM)
stock setup got the L shape tube. thats for collecting water if water goes thru the pipe.. however, i think water cant even get in thru the pipe. even at the scoop there got small drain hole.. and at the bottom airbox also got small hole for water drain.
*
yes, you are correct.
last time have read china's lotus proton forum, 1 of the owner driving gen2 drive through flooding area, many cars like vw stalled on roadside but his car managed to go through. after that he check and found water trapped inside the L shape tube. He praise this great simple but effective design...

This post has been edited by voscar: Oct 27 2014, 10:39 PM
Max
post Oct 28 2014, 10:33 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 27 2014, 05:42 PM)
I did not use the FSB on my CPS because it is rubbing against my hood insulator and the intake snorkel...you can try and see if it happens the same to yours  sweat.gif
Right and is it possible for me to ignore the L shape tube whereby I just leave it there as it is.

And do you mind sharing what are the feedback from using the non-cps snorkel? any difference to your car?  icon_rolleyes.gif
*
didnt notice difference bcoz a month after got car, i already put the campro snorkel.. so cant tell the difference.. hehe blush.gif

but from i heard, should improve FC. the campro snorkel+scoop noticeably bigger than CPS one.

CPS scoop side view.
» Click to show Spoiler - click again to hide... «
azrul24
post Oct 28 2014, 10:52 AM

New Member
*
Junior Member
12 posts

Joined: Jul 2010
From: Kuala Lumpur
Any idea how much the cost to change absober mounting and drive shaft(left side)? I would like to know the price first before hantar repair, tak mau kene tipu. Lol.
Max
post Oct 28 2014, 10:57 AM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
last weekend mod.
since neo doesn't have auto brake lock and unlock button.. quite difficult for passenger to pull/push driver's central lock.

i reuse mitsu flip side mirror switch, replacing the original side mirror switch.
the 'flip' switch rewired to central lock module. negative trigger lock/unlock.

» Click to show Spoiler - click again to hide... «


This post has been edited by Max: Oct 28 2014, 11:01 AM
anarchy2cruo
post Oct 28 2014, 02:05 PM

On my way
****
Senior Member
679 posts

Joined: Mar 2009
From: LGK
QUOTE(peejayboy @ Oct 27 2014, 08:57 AM)
Hmm, what if I pair R3 springs together with the oem tire size 195/50R16, do you think it will scrub fender?

And currently on stock suspension, my rear (2 finger) as compared to my front (2.5 finger). Weird setup by Proton  sweat.gif
*
Like this? Lamborghini also same one la.. tongue.gif

Attached Image
Max
post Oct 28 2014, 02:23 PM

Regular
******
Senior Member
1,705 posts

Joined: Jan 2003
From: Sepang - Putrajaya - Cyberjaya
QUOTE(peejayboy @ Oct 27 2014, 08:57 AM)
Hmm, what if I pair R3 springs together with the oem tire size 195/50R16, do you think it will scrub fender?

And currently on stock suspension, my rear (2 finger) as compared to my front (2.5 finger). Weird setup by Proton  sweat.gif
*
bcoz the front wheel arch is 'higher' than rear wheel arch along the body center line. ?
« Next Oldest · Car Clubs · Next Newest »
 

130 Pages « < 94 95 96 97 98 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0396sec    0.78    6 queries    GZIP Disabled
Time is now: 20th December 2025 - 12:50 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.