eh.. never knew that CPS glove box got that hydraulic thingy..

yep. got the hydraulic feel when open n close the glove box.

spot the difference.. hhehe

check ur doors, bonnet, hood if not close properly..

if everything closed properly, peek door open indicator in meter cluster.
see still light up or not. if still lit up, maybe some door/hood switch not properly installed.

err... like that i donno lor..
sure u push the lock/unlock button on remote? not the alarm/finder button?

after retrofit with HID projector.
projector abit small, 2.5" (clear lens) compare to stock 3" (frosted/dimple lens).
HID projector Bi-Xenon type (haven't wired hi beam solenoid yet)



light compare. one side:

top: stock halogen projector with halogen bulb 55w
bottom: HID projector with HID bulb 35w


top: stock halogen projector with HID bulb 35w
bottom: HID projector with HID bulb 35w

PM u.
i diy modded by myself.

which bulb u need to change?

Which side? Left or right? High beam or low beam?
Right side abit difficult coz limited space to open the headlamp back cover.
U need to maneuver abit to open the back cover.

Disconnect the cable socket to the bulb, push n slide the bulb clip. Hard to explain, but if u look at it u might understand.
Remove the bulb, insert new bulb. Note the bulb base orientation.
Theres a flat part of the bulb base to match.
Else is the reverse order.

Take note that the bulb base on the headlamp is also removable. Make sure its match to the projector/reflector base

oh.. i see..
i tried to upload pic from hp but cant.

uploaded again using pc..

H1 bulb and removeable base.


this is light comparison on my neo after retrofit with HID projector and HID bulb set.

post #53: https://forum.lowyat.net/index.php?showtopi...post&p=62059442

yep.. stok light not bright enough.

This post has been edited by Max: Aug 4 2013, 10:07 AM

Yep. I changed the projector to HID projector.
If u want to use HID in stock projector also can, but the light spread not good as HID projector.
Recommended to use 4300k HID. Yellowish white.

hmm.. havent test hid projector with halogen bulb..
but i think the light spread wont be good.

bcoz halogen n HID have different hot spot in the bulb.. - according to my reading and understand thru intrnet

yep. its my abs pump.


This post has been edited by Max: Aug 4 2013, 02:11 PM

This one I suka2 changed the bulb type 3rd brake light to LED.
10 LED with LED driver tuck inside the housing.

LED rm2/pc
LED driver RM27 (if not mistaken)
some spare resistor already have (new Rm0.10-0.20)

later i try snap some pics on car.

Pm sent.
Yep.. Stock projector not bright n far enough.
Luckily i found hid projector to retrofit.

here's the poison.. hehe..
i choose led bcoz its instantaneous light up...

Hehe... Play daihatsu charade gtti last time..
My bro drove it n got xcident.. Disassembled all parts n sold..

The caroz baldu already kosong.. Speaker all removed.. Left the shell n light only.. Mod with RGB led, can select colourful light...

Currently doesnt have different angle..

I thought to use the pnp smd also, but think its not bright enough.
The star led got at clearance sale so i think why not just shove that led in...and its super bright...

Nope. Have to modified to fix it in.

cable not properly attach to body and battery?
try tighten the screw.