May I ask a things?
The cabinet does extended DSL coverage area or not?

Following is my current connection details:
Circuit Type: Phone Status: In service
Customer name: Telekom Malaysia Speed: 1024 kbps
Service Type: ADSL_MM DSLAM Type: Copper Cabinet
Distance DP to Cabinet (KM): 0.26 Distance cabinet to MDF (KM): 4.35



After I made several complaint to TM they finally willing to pull a cable to my cabinet, but is the total length is calculate include of cabinet to MDF?

Or it shall works as the picture I attached ?




Attached thumbnail(s)

Yes.....because the Port at the MDF.....the distance to far.....unless their upgrade the cabinet....u will get 4Mbps...
for cabinet with port inside..TM will be offer to up to 4Mbps.....when distance to far...for >2Mbps connection will be unstable...unless u use phone only...even 10km u willing used tel line...

Thanks for the reply
So TM really have the 'AND' team and pulling the tie cable is possible as TM reply me as below?

Just a question..is speedtest.net accurate? if the result is Ok..does that mean my configuration have issue for BT?

How to check whether 8mbps is available in my area?

Check here:
https://mytm.tm.com.my/ap/icp/index.jsp?cus...tegory=Personal

TM bolehland 1. when u check sure got but when u register they say no have

depend of user...if more request to apply 4Mbps...they will to do..if not...still stay on 1Mbps....

Agreed with u. Don't trust that link, best is call 100 or heading straight to TM point.

VDSL2 Zero-Touch Vectoring Technology


If they want to implement soon, don't just buy old VDSL2 equipment. Get the newer ZERO Touch 2nd gen VDSL2 on vectorization technology.

Use VDSL2 with vectorization instead. If they can build a cabinet to serve every 0.5km or replace existing Apollo rocket type switches in urban areas, average 80mbps is possible on a single copper pair. Current Unifi services are only doing similar speeds and that's is enough to serve IPTV and 20mbps with still breathing space.

Every home with RAW 32-40mbps is more than enough using different VLANs.

10/8mbps for IPTV and upto 20mbps for internet/voip port. Total needed is just 30-32mbps.

Read that? 5X cheaper than FTTP/FTTH that means if Unifi chose VDSL2 earlier, we probably have almost 5X more covergae than now and still delivering similar 20mbps/30mbps/50mbps on existing copper with option to go full FTTP later if needed with demand.

VDSL2 is not very much different from installing Streamyx using existing copper phone cabling except if using pure fibre until the MSAN cabinet.

something has happed to me..
around 2pm i notice there is increment in the internet speed ( speed test shows 8.7mbps)
but not long after that tm staff call me and said my house not support for that kind of speed..

what the hell is wrong with that ?

just now i test the speed , i get 2.08 mbps..i call 100 and she said that in their system my house configuration is at 2 mbps..
what the hell..!
im so pissed off right now..
could someone explain my situation ?

thanks...

by the way, this is my router setting at the moment even they set at 2mbps...
FYI my previous connection is 4mbps

This post has been edited by bluetomsguy: Feb 15 2013, 04:12 PM


Attached thumbnail(s)

Looks perfectly well to support 8M with port capped to 10238kbps/637kbps with only 14dB/5.6dB attenuation.

Very good line condition. They cancel it probably because they don't want to sell you the line for certain reasons such as keeping the extra port for themselves or too lazy to process it for you at this moment.

now im waiting for technician to come over n hope its gonna solve the prob...

Today you know what day is it la. Maybe they turn down your order temporarily.
Extra lunch hour.

not today la...maybe tomorrow..the issue here is that they already give me the speed..
but they took it back and said to me my house is not supported...
what the heck...

Maybe they haven't confirm the tests properly and have to make a run for early lunch today? Or course they won't leave it be just to make sure things go smoothly.

yeah...or maybe they told me it is not supported because at that time im using torrent ?
maybe they test at cabinet got low speed ?

512Kbit

My area, is that support for 8mbps?

Just pm me ur username , telephone line no and streamyx owner Ic no , I can check for u.