It's not empty.
I erased them for security purposes.

Thanks.

see your connection type in IPv4 ? it is stated DHCP,.. u need to change it to 3g-wan or wan,.. or UMTS

Dairyman has today launched a brand new website to support the ROOter firmware.

http://ofmodemsandmen.com/index.html

There is support information on the whirlpool WIKI which is also re-vamped.

http://whirlpool.net.au/wiki/router_openwrt

The latest Huntsman release is 2013-05-21

Fixes for the Cellular Mode on newer Huawei so they, at least, will show the current mode. Mode changing may also work for some Huawei modems now. A change was made during modem connection from restarting the network to restarting the WAN. This may correct some problems that occur during connection. The pkill function was added to the build so that extra copies of getsig are removed and the Network Status page does not get messed up. A new value was added to the Modem->Connection page dealing with delay during connection. It is now possible, for QMI modems and the E3276, to change the delay before the connection takes place. It must be a minimum of 60 secs but can be increased if you are having delay problems with the connection.

problem solved after restart.

Thanks.

guy,
how to hard reset openwrt on TL3420???
i do wrong setting on my openwrt nwo cannot connect to modme T__T

http://klseet.com/index.php/tl-wr1043nd-ve...vert-to-factory

thanks bro,
it working...
btw, i currently using huntsman firmware...
any guide on setting which work best with 3g modem??
i feel this huntsman firmware seem slow to detect modem and connect to 3g as compare to RC1

But i feel otherwise.
More quicker than Black Widow.
Thanks.

not sure is my seting correct or not...
after the modem is up, the 3g connection need take fwe minute before up online..
last time less than a minute i can online....

how to disable mf190 autoplay, i'm not able to get connect while i plug the 3g dongle to mr3420

any1 has complete guide setting huntsman firmware?
i set up the 3g connection but once drop , it wont auto connect back..
worst thing, after reboot the modem, the seting gone missing even i click save/applied..
any1 have this kind issue?

Please follow the correct configuration procedure here:

http://ofmodemsandmen.com/configure.html

http://ofmodemsandmen.com/conmodem.html

Cheers

John k

PS Home page here

http://ofmodemsandmen.com/index.html

Anyone knows AT commands to lock to spesific cell ID?

Most modems do not support the required AT commands.

Here is how it is done for Sierra modems:

http://www.rfactory.org/OpenWRT/locking.html

Hurm I'm using the following command:



Only works when the modem has been registered to the cell id
Tested on Huawei E398 U1V2

thanks for the command tips...

like below, which is the cell id? 5142?

Cell ID : 5142 (20802)

Yep, 5142

Sigh, still cant change band mode in latest huntsman.
I got serious UMTS2100 problem here, seems like maxis keep changing different tower.

Need to use UMTS 900 then very stable:x

latest Huntsman 2013-06-01 is out. i try to fetch the change logs but stuck at Getting Change Log from Server.
any1 have the change log?

---got it--
Huntsman 2013-06-01 A new reprogrammable router button(s) feature. There is a tutorial for using this new feature on the website.
Notes:
- New tutorial for band and frequency locking a cell channel when using a Sierra modem.
- All traffic re-directed to the new support website, http://ofmodemsandmen.com/index.html.



This post has been edited by fitzhex: Jun 1 2013, 12:50 AM

if it is just allowing the use of the reset/wps button behind a router then it is almost the same as the 5-27 release in forum. This 1 might have better stuff in store

going to flash it later