Tp LInk TL-MR3420 Owner CLub V2.5, need a pro here
|
|
 May 29 2013, 10:42 PM
Return to original view | Post
#1
|
 
Junior Member
249 posts Joined: Aug 2009 
|
Anyone knows AT commands to lock to spesific cell ID?
|
Quote|
|
|
|
|
May 30 2013, 07:48 PM
Return to original view | Post
#2
|
|
Junior Member
249 posts Joined: Aug 2009
|
QUOTE(Wahroonga Farm @ May 30 2013, 05:27 AM) Most modems do not support the required AT commands. Hurm I'm using the following command:Here is how it is done for Sierra modems: http://www.rfactory.org/OpenWRT/locking.html  CODE AT^FREQLOCK? : To check current setting AT^FREQLOCK=1,5302 : To lock to specific cell id, 5302 is cell id in hexadecimal AT^FREQLOCK=0 : To unlock/remove setting Only works when the modem has been registered to the cell id  Tested on Huawei E398 U1V2 |
|
|
May 30 2013, 08:52 PM
Return to original view | Post
#3
|
|
Junior Member
249 posts Joined: Aug 2009
|
QUOTE(ooikl @ May 30 2013, 08:49 PM) thanks for the command tips... Yep, 5142like below, which is the cell id? 5142? Cell ID : 5142 (20802) |
|
|
Jun 10 2013, 08:19 PM
Return to original view | Post
#4
|
|
Junior Member
249 posts Joined: Aug 2009
|
Guys, I really need helps.
My router can detect LTE, but seems not connected to the internet. Please help me...      |
|
|
Jun 10 2013, 09:15 PM
Return to original view | Post
#5
|
|
Junior Member
249 posts Joined: Aug 2009
|
QUOTE(digilife @ Jun 10 2013, 08:39 PM) This dun shows that you are logged into its Network but sooner it might, just need to be patience I have wait more than 30 minutes, it keep showing not connected [attachmentid=3481119]  There is one time, I on the router, then went to mamak having dinner, then when i am back after about 1 hour it is still the same showing not connected |
|
|
Oct 23 2013, 05:23 PM
Return to original view | Post
#6
|
|
Junior Member
249 posts Joined: Aug 2009
|
QUOTE(maxcheam @ Oct 23 2013, 02:33 PM) Just ordered 2 from Lazada at RM59/each with free shipping. Will update when I find out. Im curious about the WiFi quality  Update: Although I have yet to receive the WR710N, I browsed around at TP-Link Malaysia site and found the factory firmware for this device. It is likely that we'll get 8MB flash memory as the size of the factory firmware is 7MB++.  http://www.tp-link.com.my/resources/softwa...N_V1_130419.zip  Will be waiting your review (vs MR3420)  |
|
|
Nov 12 2013, 12:12 AM
Return to original view | Post
#7
|
|
Junior Member
249 posts Joined: Aug 2009
|
QUOTE(syahpian @ Nov 11 2013, 11:54 PM) yellow also cannot detect, even after several reboot I have the same situation with you, tested using E398 & mr3420 v2, happening twice   If someone can re-upload the Huntsman 2013-10-16red & 2013-10-12 for mr3420 v2? This is the more stable version. Need to flash back to stock firmware. Then flash back to 2013-11-10red or 2013-11-10 (yellow) I can confirm 2013-11-10red or 2013-11-10 (yellow) a bit buggy  |
|
Topic ClosedOptions
|
| Change to: |  0.0223sec
 0.79
 7 queries
 GZIP Disabled
Time is now: 11th December 2025 - 04:05 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.