i heard that mirage equipped with 4 wheels abs?

so how?

mirage or myvi ezi?

myvi cheaper wor

i thought all car that came with ABS is all 4 wheel..not meh?
i'm noob in ABS since i've never driven a car with ABS be4....never...this is the 1st car

---

Added on November 20, 2012, 2:14 pm
i compared be4 and each car really have their own advantage...literally..it really depends which one u prefer
1 is local brand 1 is foreign brand
1 better handling 1 less handling
1 more power 1 little less power
1 not so good FC, another with excellent FC
1 using 4AT, another using CVT
1 less gadget, 1 with gadget that only existed in luxury big car

Not sure, but I heard normal car would only have 2 wheels abs, anyone can elaborate more?

Four-channel, four-sensor ABS
This is the best scheme. There is a speed sensor on all four wheels and a separate valve for all four wheels. With this setup, the controller monitors each wheel individually to make sure it is achieving maximum braking force.

Three-channel, four-sensor ABS
There is a speed sensor on all four wheels and a separate valve for each of the front wheels, but only one valve for both of the rear wheels.

Three-channel, three-sensor ABS
This scheme, commonly found on pickup trucks with four-wheel ABS, has a speed sensor and a valve for each of the front wheels, with one valve and one sensor for both rear wheels. The speed sensor for the rear wheels is located in the rear axle. This system provides individual control of the front wheels, so they can both achieve maximum braking force. The rear wheels, however, are monitored together; they both have to start to lock up before the ABS will activate on the rear. With this system, it is possible that one of the rear wheels will lock during a stop, reducing brake effectiveness. This system is easy to identify, as there are no individual speed sensors for the rear wheels.

One-channel, one-sensor ABS
This system is commonly found on pickup trucks with rear-wheel ABS. It has one valve, which controls both rear wheels, and one speed sensor, located in the rear axle. This system operates the same as the rear end of a three-channel system. The rear wheels are monitored together and they both have to start to lock up before the ABS kicks in. In this system it is also possible that one of the rear wheels will lock, reducing brake effectiveness. This system is also easy to identify, as there are no individual speed sensors for any of the wheels.

so this car is which one?
4 channel 4 sensors?

in tis forum, anyone who book mirage around 27 october or earlier get thei car already? coz mine haven get yet due to AP haven reach my SA...my location is JB....so pls comment...tq

in tis forum, anyone who book mirage around 27 october or earlier get thei car already? coz mine haven get yet due to AP haven reach my SA...my location is JB....so pls comment...tq

ic...my number plate take ady...nw juz wait for AP to let puspakom to test n register with JPJ den settle...juz wait for AP coz our mirage is CBU...my SA said tis week can done one...hope so...^^

Har? I tot without AP you cant even bring the car into the country

AP is approve permit....how much u loan plus how many years...ur loan is low n nice le...which bank ya?

mine quite high due low amount of loan...my interest is 2.95 n loan 30K oni 5 years from CIMB

hmmm....i consult ady plus the loan is approve ady...so nvr mind la.wat to do...?