Silverstone FM92 at Thundermath, LYP 4th Floor. RM6x, I think.

This post has been edited by clayclws: Dec 16 2007, 01:30 AM

omg...
it is expensive >.<"
maybe get a chapalang 90mm fan to use 1st...
later baru change a better one...

btw, can I use the bracket to fit 80mm fan?
coz i still got few high cfm fan on hand...

No more good Delta's these days?

hmm .. if not mistaken having cooler facing toward the GPU had temperature 54c ...

While having the cooler installed on other side of GPU with fan blowing toward the card achieved 55c ...

Lastly cooler installed on other side of GPU with fan sucking air away achieved 58c ...

I hoped I didn't translated it wrongly ....

Hmm, I thought that fan blowing towards the card achieved higher temperature? While fan pulling the air away from the card achieved lower?

Yes, you can fit it the 80mm fan with the bracket...at least that's what is written. The Silverstone FM92 is actually a 110mm fan fitted unto a 92mm casing.

Delta...most of them are really loud. Panaflo is good. Can refer to AllnGap's Blow Out Sales for more fan options.

This post has been edited by clayclws: Dec 16 2007, 02:24 AM

oh oooo...
now actually i am thinking to get ultra 120 fan clip,
and fit a 120mm fan on it ^,^
that will be super cool down the temperature ^,^
just wonder i can get the clip or not only...

and plan to get another fan clip,
wana test 2 fan on my ultra 120 ex,
one blow and one suck~

If you do find the clips, tell me where to get 'em as well...been looking for a very long time for them. Oh, and the anti-vibration strips as well.

Hmm, I have some extra sound-proof materials for my car. Does it work as anti-vibration and noise reduction as well?

Thanks but I'll rather stick to the thick double sided tape for the meantime

do u really need the anti-vibration rubber?
actually now i barely can hear any sound from my system,
the cpu is put of the table,
just beside my mouse,
and wat I hear is only the fan at the front panel there sucking the air into the casing...

In case the fan don't fit right, the anti-vibration strips will counter the shaking fans.

oh oo...
luckily mine didnt have such problem,
dun need to add any rubber on it ~

dunno if this already been posted or not

Accelero S1 Rev. 2 [Link]





Compatible with:

1. ATI Radeon:
   • 3870
   • 3850
   • 2600
   • 2400
   • X1950
   • X1900
   • X1800
   • X1650
   • X1600
   • X1550
   • X1300
2. nVIDIA GeForce:
   • 8800GTS (G92)
   • 8800GT
   • 8600
   • 8500
   • 8400
   • 7950GT
   • 7900
   • 7800
   • 7600
   • 7300
   • 6800
   • 6600

wonder how much it would cost?

hope this is the best price/performance cooler

nothing changed, just some additional mounting screws i guess

what's the different between version 2 compared to previous one .. ? ?

nothing much on the heatsink itself

just the new Accelero S1 Rev. 2 now comes with a new flexible mounting mechanism

multiple screw hole sets

and modifications to the heatpipes enabling it to fit a wider range of leading graphic cards

VR Zone: Accelero S1 Rev. 2 Fits More Graphics Cards

I wonder performance could be increased by adding to more pipes into the heatsink .....

It would be interesting to see how far design of this cooler could maximize its performance within the given size,,,

can this cooler fit my anter superl lanboy? I really cannot tahan looking at the 90+c edi...

When is Xigmatek gonna introduce their HDT mecha into VGA cooling....

Edit: Opps My bad.......juz saw this HDT ver.

AXE cooler.

This post has been edited by Terence573: Dec 24 2007, 12:07 AM

where can get this cooler ..LYN got ?

U cant find it in Malaysia. Local distro havent bring that in. But you can get it from bulk section. I think bata is bulking it.