Here is my Ati X1950xtx with HR-03 & 12cm TT smart case fan

This post has been edited by rlhc17: Jan 30 2007, 04:28 AM


Attached thumbnail(s)

you run the system naked without case all the time ???

anyway .. how's the temperature of the card (Core/Voltage Regulator/ Temperature Chip)...

i am curious whether single 21cm fan is enough for the whole card...

i put dual CM 12 cm fans ...

nice... how you mount the fan? what fan clips is that? is it stable?

1 120mm should be enough since HR 03 is recommended to use 90mm only. hhee

I have already send an email personally to Zerotherm.If they say that it will fit, i might consider getting it instead of zalman or TR.Not sure why but i think i really like the design.Design always come first in my mind.lol...But from the review given, performance seems its going to be a letdown..

maybe you will get good performance after you get it...who knows... reviews might not always true, sometime there might be some other thing cause the reduce in performance...just my opinion lar...

the fan clip allowed to hold the 12cm fan with just nice .. but it would bent the clip during long run ...

single 12cm fan on HR apply on ATI high end serious is enough

i don't think so ..i am using dual also still need quite amount of fresh air to cool it off..

however more or less it is becoz i am using CM UV fan ..rather than TT blue led ..

i can't bear with the noise .....

yup naked all the time coz it is easy to change hardware

temp full load less than 65c hr-03 stock cooler more than 80c

for me single 12cm good enough ady-naked rig

This post has been edited by rlhc17: Jan 31 2007, 01:06 AM

full load less than 65c should be ok with the HR-03..

what about the Voltage regulator ?? when i play COH it could rose up to 91c ...

91'C !!!!!!!!! that is insane. do you have any heatsink on it?

what i mean is the voltage regulator not the core .... if u use ATI tool ...

there is one section that display the voltage regulator of the card ..which is in physically is the chips under a long heat sink at end of the card nearby power connector..

that chip should be hot especially when gaming intensely..

@rlhc17

can check it out for me ???

Hope that might be true.Anyway, i just got a confirmation from Zerotherm that the GX810 will work on 7300GT (but the picture shown as example has a different stock cooler), so i might be getting it soon.Now considering the option that i have...

Ati tool can't detect my X1950 voltage regulator temp always @0c

This post has been edited by rlhc17: Jan 31 2007, 07:01 PM

If you get that cooler, let us know the result...

ya ati tool dont support x1950 yet. i not sure what brand is your card but most of the time, you can always use those software that come with the card.

it doesnt suppoort x1650 pro also..

what about the latest release ATI tool 1.6 ???

have any guys try it out on X1950 series ??

it has updated several cards support if not mistaken..

I think you means ATI Tool 2.6.

It do support x1950series but not x1950pro and x1650pro

just wondering here if ati tool can be used with nvidia cards?
can it detects those core n mem temps of nvidia cards?

yah .. actually it should be ATI Tool 0.26 ..

so it does not support the two card u mentioned as well....

hmm .. they are really slow in updating the card support...

Just got the GX810 from Singapore.My friend help me bought it there..Will be getting it this coming CNY and "HOPEFULLY", it can help me lower the temperature of my stock Galaxy.Its really getting very hot at 56c Idle at 550/1500..

EDITED:

Just wondering, would current after-market GC cooler will still be suitable for the new 8series?

This post has been edited by akachester: Feb 10 2007, 10:17 PM