AMD Socket-939 Overclocking Database

Lowyat.NET forums

Lowyat.NET Kopitiam Garage Sales

Lowyat.NET Rules and Regulations FAQ Help Search Members

Welcome Guest ( Log In | Register )

Lowyat.NET -> Overclockers United -> Lowyat.NET Overclocking Database

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

AMD Socket-939 Overclocking Database, Athlon64, Athlon64 FX, Opteron

views

TSsoulfly	Jan 20 2006, 05:41 PM, updated 18y ago Show posts by this member only \| Post #1
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	AMD Socket-939/AM2 Overclocking Database for Athlon64, Athlon64 FX & Opteron Rules and requirements: 1. Only 1 post each for one system. 2. One single screenshot of SP2004/Prime95, two CPU-Z (each showing CPU and RAM properties) is required. 3. CPU stepping is a must! Check for your CPU stepping on top of your processor. Also include informations such as BIOS set CPU voltage & cooling method. 4. Include other necessary informations such as motherboard type, memory configuration. 5. Only results with at least 8 hours prime stable will be accepted. Set your SP2004/Prime95 to run custom test with 8-512K in-place FFT (for CPU with 512KB L2 cache) or 8-1024K in-place FFT (for CPU with 1MB L2 cache) or BLEND test. 6. All of the requirements above are mandatory. Tools: SP2004 - http://sp2004.fre3.com/download.htm CPU-Z - http://www.cpuid.com/cpuz.php Lowyat.NET Socket-939 Results CAB1E 0614 BPBW \| Par@dox \| 3204MHz \| 1.595V \| Opteron 144 E4 \| WATER CAB1E 0614 BPBW \| OverCool \| 3150MHz \| 1.582V \| Opteron 146 E4 \| AIR CAB1E 0614 BPMW \| amok \| 3109MHz \| 1.400V\| Opteron 144 E4\| WATER CAB2E 0540 FPMW \| tAmp0i \| 3000MHz \| 1.508V \| Opteron 146 E4 \| AIR CABYE 0540 FPAW \| sup3rfly \| 3000MHz \| 1.550V \| Opteron 146 E4 \| AIR CABYE 0540 FPMW \| kazama \| 3000MHz \| 1.595V \| Opteron 146 E4 \| AIR CAB2E 0602 GPAW \| kiljim \| 2987MHz \| ?????V \| Opteron 144 E4 \| AIR CAB1E 0614 BPMW \| kingmaker_20 \| 2970MHz \| 1.370V \| Opteron 144 E4 \| WATER CAB2E 0602 GPAW \| amok \| 2927MHz \| 1.450V \| Opteron 144 E4 \| WATER CACJE 0607 APAW \| charge-n-go \| 2808MHz \| 1.456V \| Opteron 144 E4 \| AIR(fanless) CAB2E 0610 GPAW \| pcmoddingmy \| 2808MHz \| 1.488V \| Opteron 144 E4 \| Water cooled (passive rad) LBBLE 0516 GPBW \| hafifee \| 2808MHz \| 1.52V \| Athlon64 3000+ E3 \| AIR ????? 0522 ????? \| KilJim \| 2808MHz \| 1.640V \| Athlon64 3000+ E3 \| AIR xxxxx xxxx xxxx \| mazdagtr210 \| 2804MHz \| 1.475V \| Athlon64 3000+ E3 \| WATER LBBLE 0520 FPMW \| gsan \| 2800MHz \| 1.520V \| Athlon64 3200+ E3 \| AIR xxxxx xxxx xxxx \| jslut \| 2800MHz \| 1.570V \| Athlon64 3700+ E4 \| AIR LBBLE 0522 FPBW \| kingmaker_20 \| 2754MHz \| 1.500V \| Athlon64 3000+ E3 \| AIR LBBWE 0542 GPAW \| o23ff \| 2754MHz \| 1.700V \| Athlon64 3000+ E6 \| WATER LBBLE 0520 FPMW \| dinster \| 2714MHz \| 1.472V \| Athlon64 3200+ E3 \| AIR xxxxx xxxx xxxx \| Cyclone87 \| 2711MHz \| 1.725V \| Athlon64 Engineering Sample E4 \| AIR LBBWE 0542 EPHW \| cktee83 \| 2706MHz \| 1.600V \| Athlon64 3000+ E6 \| AIR xxxxx xxxx xxxx \| ethanlow \| 2700MHz \| 1.450V \| Athlon64 3000+ E3 \| AIR LBBWE 0607 FPBW \| nakata101 \| 2700MHz \| 1.500V \| Athlon64 3200+ E6 \| AIR xxxxx 0516 DPJW \| ah_chak \| 2700MHz \| 1.600V \| Athlon64 3000+ E3 \| AIR LBBLE 0516 CPBW \| ahpaul82 \| 2700MHz \| 1.650V \| Athlon64 3000+ E3 \| AIR NBBWE 0618 FAB \| lolhalol \| 2700MHz \| 1.680V \| Athlon64 3000+ E6 \| AIR XXXXX 0530 CPDW \| siawgu \| 2700MHz \| 1.680V \| Athlon64 3000+ E6 \| WATER CDBHE 0550 TPWM \| rendl \| 2651MHz \| 1.412V \| Athlon64 3200+ E4 \| AIR LBBWE 0540 DPIW \| newbieockids \| 2662MHz \| 1.568V \| Athlon64 3000+ E6 \| AIR LBBLE 0516 GPBW \| ah_khoo \| 2655MHz \| 1.430V \| Athlon64 3000+ E3 \| AIR LBBWE 0543 BPEW \| kanethesun \| 2617MHz \| 1.575V \| Athlon64 3000+ E6 \| AIR LBBWE 0603 APBW \| kev da man \| 2615MHz \| 1.500V \| Athlon64 3000+ E6 \| AIR LBBWE 0544 FPCW \| magiara \| 2608MHz \| 1.632V \| Athlon64 3000+ E6 \| AIR LBBWE 0614 BPMW \| jsnkok \| 2602MHz \| 1.475V \| Athlon64 3000+ E6 \| AIR LBBWE 0542 FPCW \| Cyclone87 \| 2601MHz \| 1.400V \| Athlon64 3000+ E6 \| AIR LBBLE 0520 xxxx \| winc87 \| 2502MHz \| 1.420V \| Athlon64 3000+ E6 \| AIR XXXXX 0516 FPAW \| Westley \| 2500MHz \| 1.475V \| Athlon64 3200+ E3 \| AIR This post has been edited by soulfly: Jan 7 2008, 12:01 AM
Card PM	Report Top Like Quote Reply

winc87	Jan 21 2006, 11:37 AM Show posts by this member only \| Post #2
w\|Nc Senior Member 1,621 posts Joined: Jan 2003 From: Seremban
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 21 2006, 06:25 PM Show posts by this member only \| Post #3
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	bro.... stepping & cooling?
Card PM	Report Top Like Quote Reply

winc87	Jan 21 2006, 07:10 PM Show posts by this member only \| Post #4
w\|Nc Senior Member 1,621 posts Joined: Jan 2003 From: Seremban	Oppsss....forgot the stepping.....i will check it in these days....i use air cooling xp 120 with a 12cm fan on it.
Card PM	Report Top Like Quote Reply

siawgu	Jan 21 2006, 08:16 PM Show posts by this member only \| Post #5
Enthusiast Senior Member 996 posts Joined: Jan 2003 From: Kuching, Sarawak	======================================== Short description: cpu: 300x9 @ 2700Mhz, 1.68 ram: DDR450, CL2.5-4-3-8-1T @ 2.9V ======================================== AMD Athlon 64 3000+ 0530CPDW Rev. E6 DFI LANParty UT Ultra-D Mod'ed to SLI (6/23 BIOS) 2x256MB Kingston Value RAM DDR PC-3200 (BT-D43) Leadtek Winfast 6600GT 128MB DDR3 40GB Western Digital ATA HDD + 20GB Maxtor ATA HDD TDK CDRW & Lite-On DVD Writer Cooler Master 450W PSU Thermaltake BigWater SP2004 primed for 24 Hours ++
Card PM	Report Top Like Quote Reply

winc87	Jan 22 2006, 02:58 AM Show posts by this member only \| Post #6
w\|Nc Senior Member 1,621 posts Joined: Jan 2003 From: Seremban	My cpu's stepping is LBBLE 0520. The alphabets behind the week i forgot.
Card PM	Report Top Like Quote Reply

Cyclone87	Jan 22 2006, 08:24 AM Show posts by this member only \| Post #7
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	Short description: cpu: 200x13.5 @ 2700Mhz, 1.725v ram: DDR400@ 6-3-3-2.5 ,2.6v My CpuZ ======================================== AMD Athlon 64 ES ( Venice E4 core) Sry..no Stepping DFI NF4 Infinity 1xSamsung TCCC + 1x Mircon -5B G (512x2) Gecube X300/550 128bit 128mb 80GB Maxtor 7200Rpm 8mb Buffer Xp90 + Delta 5v 92mm Fan And ICute 450watt 24pin This post has been edited by Cyclone87: Jan 22 2006, 02:23 PM
Card PM	Report Top Like Quote Reply

PowerHouse	Jan 22 2006, 11:57 PM Show posts by this member only \| Post #8
Getting Started Junior Member 237 posts Joined: Nov 2005 From: Kuching...	[quote=Cyclone87,Jan 22 2006, 08:24 AM] Short description: cpu: 200x13.5 @ 2700Mhz, 1.725v ram: DDR400@ 6-3-3-2.5 ,2.6v My CpuZ ======================================== AMD Athlon 64 ES ( Venice E4 core) Sry..no Stepping DFI NF4 Infinity 1xSamsung TCCC + 1x Mircon -5B G (512x2) Gecube X300/550 128bit 128mb 80GB Maxtor 7200Rpm 8mb Buffer Xp90 + Delta 5v 92mm Fan And ICute 450watt 24pin by the way, may i ask, what is ur cpu cpec? is it 3200 or 3000.tq
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 23 2006, 02:25 PM Show posts by this member only \| Post #9
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	Cyclone87... no stepping meh? Anyway.... try use CPU-Z 1.31
Card PM	Report Top Like Quote Reply

apengfx-	Jan 23 2006, 04:28 PM Show posts by this member only \| Post #10
I'm a Master Trader. Senior Member 1,553 posts Joined: Jan 2003 From: Sniper Island is in your heart :)	mau tanya... ES...new kah? apa yg spesial?
Card PM	Report Top Like Quote Reply

Cyclone87	Jan 23 2006, 07:28 PM Show posts by this member only \| Post #11
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	QUOTE(soulfly @ Jan 23 2006, 02:25 PM) Cyclone87... no stepping meh? Anyway.... try use CPU-Z 1.31 ES...have no stepping on the processor itself. No stepping or even a simple word like assemble in malaysia. It a plain chip. And...CpuZ 1.31..dont give me anything special on core and revision. Even CPUid..dont even have the assemble date. Only got clockspeed and multiplier. QUOTE by the way, may i ask, what is ur cpu cpec? is it 3200 or 3000.tq It 3200+. San Diego with Half L2 cache or the new code is Venice E4.
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 23 2006, 08:53 PM Show posts by this member only \| Post #12
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	oh ya... suddenly remembered that ES cpu don't have anything on the heatspreader
Card PM	Report Top Like Quote Reply

sup3rfly	Jan 23 2006, 10:29 PM Show posts by this member only \| Post #13
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	Here is mine...i have posted this in the Stable O/C Database...i dunno does this consider as repost...if it is kindly remove it plz.... the stepping of the proc is CABYE 0540 FPAW CPU : AMD Opteron 146 (3.0GHz @ 10x300MHz, 1.45 x 110% = 1.550V) Core : San Diego Socket : S939 RAM : 2 x 512MB Patriot PDP Systems PC4200 (DDR500, 2.5-3-3-5, 2.90V) M/B : DFI nF4 LanParty Ultra-D (300HTT, 3xLDT, 1.50V) PSU : Antec TPII-480w Cooling : Thermalright SI-120C + NMB 120mm High Speed Fan (Modded by AllnGap) This post has been edited by sup3rfly: Jan 23 2006, 10:49 PM
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 24 2006, 10:53 AM Show posts by this member only \| Post #14
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	no problem, this thread is different one very good result anyway
Card PM	Report Top Like Quote Reply

sup3rfly	Jan 24 2006, 11:49 AM Show posts by this member only \| Post #15
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	QUOTE(soulfly @ Jan 24 2006, 10:53 AM) no problem, this thread is different one very good result anyway thx still learning >.<"
Card PM	Report Top Like Quote Reply

apengfx-	Jan 25 2006, 11:09 PM Show posts by this member only \| Post #16
I'm a Master Trader. Senior Member 1,553 posts Joined: Jan 2003 From: Sniper Island is in your heart :)	QUOTE(sup3rfly @ Jan 23 2006, 10:29 PM) Here is mine...i have posted this in the Stable O/C Database...i dunno does this consider as repost...if it is kindly remove it plz.... the stepping of the proc is CABYE 0540 FPAW CPU : AMD Opteron 146 (3.0GHz @ 10x300MHz, 1.45 x 110% = 1.550V) Core : San Diego Socket : S939 RAM : 2 x 512MB Patriot PDP Systems PC4200 (DDR500, 2.5-3-3-5, 2.90V) M/B : DFI nF4 LanParty Ultra-D (300HTT, 3xLDT, 1.50V) PSU : Antec TPII-480w Cooling : Thermalright SI-120C + NMB 120mm High Speed Fan (Modded by AllnGap) wow..terbaik la..boleh tolak lagi nie
Card PM	Report Top Like Quote Reply

sup3rfly	Jan 26 2006, 12:07 AM Show posts by this member only \| Post #17
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	thx thx....i dun think it still can push futher... i get errors in 3.1 ghz =\ let me try with my fortron when its arrive ^^
Card PM	Report Top Like Quote Reply

gsan	Jan 27 2006, 12:08 AM Show posts by this member only \| Post #18
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	come on guy, let's bring lowyat database up. AMD Athlon 64 3200+ LBBLE 0520 FPMW (same as dinster's one ) DFI LANParty UT Ultra-D (704-2BTA BIOS) Gskill 2x512MB GH Winbond UnTesTed 64MB Leadtek Winfast 6200TC 64bit Acbel iPower 450W PSU Thermalright xp90c with 92mm @ 2.2k rpm this proc can do 2.8GHz stable with 1.536v before but somehow now become unstable and only stable @ 1.568v. anyone know what's the problem? This post has been edited by gsan: Jan 27 2006, 08:15 AM
Card PM	Report Top Like Quote Reply

KilJim	Jan 27 2006, 12:49 AM Show posts by this member only \| Post #19
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	will post a proper one later on bleh, Optys cheating wan
Card PM	Report Top Like Quote Reply

sup3rfly	Jan 27 2006, 06:39 AM Show posts by this member only \| Post #20
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	QUOTE(KilJim @ Jan 27 2006, 12:49 AM) will post a proper one later on bleh, Optys cheating wan where got cheat wo...
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 27 2006, 02:27 PM Show posts by this member only \| Post #21
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	haha.... this database purpose is not to show who's the best, it's more to share the results. that's why we would need the steppings, for reference purpose. we can refer to the frequency of the stepping that can regularly do good speeds.
Card PM	Report Top Like Quote Reply

Springdale	Jan 27 2006, 04:19 PM Show posts by this member only \| Post #22
Getting Started Junior Member 89 posts Joined: Aug 2005	QUOTE(soulfly @ Jan 27 2006, 02:27 PM) haha.... this database purpose is not to show who's the best, it's more to share the results. that's why we would need the steppings, for reference purpose. we can refer to the frequency of the stepping that can regularly do good speeds. precisely, spot-on, <insert other synonyms here> while we are constantly looking at the databases of other forums such as xtreme.org etc, hopefully we can achieve the same with reference to our own local scene. with that, then more powah to us when we decide to go shoppin for the next CPU etc...
Card PM	Report Top Like Quote Reply

newbieockids	Jan 27 2006, 07:40 PM Show posts by this member only \| Post #23
Regular Senior Member 1,405 posts Joined: Jun 2005	Here is mine: ============================================ Short description: AMD Athlon 64 3000+ E6(LBBWE 0540 DPIW) + Stock Heatsink 1800 @ 2662Mhz @ 1.568Vcore ============================================ DFI NF4 Infinity 1x 512MB Samsung TCCD MSI NX6600 TD256E 128bit 256mb 1x 80GB Maxtor 7200Rpm 8mb Buffer 1x Imation CDRW 2x 120cm fan @7V(NMB+JMC Datech) ~ Intake 2x 80cm fan @12V (Delta FFB0812EHE) ~ Exhaust Powered by: Powerlogic Magnum 300watt 24pin "PurePower" <--
Card PM	Report Top Like Quote Reply

KilJim	Jan 28 2006, 01:27 AM Show posts by this member only \| Post #24
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(Springdale @ Jan 27 2006, 04:19 PM) precisely, spot-on, <insert other synonyms here> while we are constantly looking at the databases of other forums such as xtreme.org etc, hopefully we can achieve the same with reference to our own local scene. with that, then more powah to us when we decide to go shoppin for the next CPU etc... though you'd never find any of the good clocking steppings at shops anymore so it doesnt really help u there unless you're tryin to get a proc of some fella that doesnt OC
Card PM	Report Top Like Quote Reply

gsan	Jan 28 2006, 09:00 AM Show posts by this member only \| Post #25
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	Updated: 2.8G @ 1.536v AMD Athlon 64 3200+ LBBLE 0520 FPMW Thermalright xp90c with 92mm @ 2.2k rpm
Card PM	Report Top Like Quote Reply

sup3rfly	Jan 28 2006, 09:11 AM Show posts by this member only \| Post #26
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	i tried 305 x 10 and 310 x 10 on my comp...no luck
Card PM	Report Top Like Quote Reply

newbieockids	Jan 28 2006, 11:54 PM Show posts by this member only \| Post #27
Regular Senior Member 1,405 posts Joined: Jun 2005	QUOTE(sup3rfly @ Jan 28 2006, 09:11 AM) i tried 305 x 10 and 310 x 10 on my comp...no luck even u hentam the VCore > 1.6?..
Card PM	Report Top Like Quote Reply

sup3rfly	Jan 29 2006, 07:18 AM Show posts by this member only \| Post #28
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	QUOTE(newbieockids @ Jan 28 2006, 11:54 PM) even u hentam the VCore > 1.6?.. nono didnt try vcore...dun wan to increase it anymore...its high enough....
Card PM	Report Top Like Quote Reply

gsan	Jan 29 2006, 07:25 AM Show posts by this member only \| Post #29
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	CNY Updated: 2.8G @ 1.52v AMD Athlon 64 3200+ LBBLE 0520 FPMW Thermalright xp90c with 92mm @ 2.2k rpm This post has been edited by gsan: Jan 29 2006, 07:25 AM
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 29 2006, 02:06 PM Show posts by this member only \| Post #30
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	wow... voltage getting lower and lower
Card PM	Report Top Like Quote Reply

grafreak	Jan 29 2006, 03:03 PM Show posts by this member only \| Post #31
New Member Junior Member 22 posts Joined: Jan 2006 From: Kuching, Sarawak, MY	QUOTE(gsan @ Jan 29 2006, 07:25 AM) CNY Updated: 2.8G @ 1.52v AMD Athlon 64 3200+ LBBLE 0520 FPMW Thermalright xp90c with 92mm @ 2.2k rpm veryy niceee. i can only hit 2.52GHz @ 1.6Vc urs is E3? or E6?
Card PM	Report Top Like Quote Reply

newbieockids	Jan 29 2006, 04:06 PM Show posts by this member only \| Post #32
Regular Senior Member 1,405 posts Joined: Jun 2005	QUOTE(grafreak @ Jan 29 2006, 03:03 PM) veryy niceee. i can only hit 2.52GHz @ 1.6Vc urs is E3? or E6? frrm the stepping, i believe it was E3.. correct me if im wrong gsan.. gsan, push it to 3ghz ler..
Card PM	Report Top Like Quote Reply

KilJim	Jan 30 2006, 01:02 AM Show posts by this member only \| Post #33
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(grafreak @ Jan 29 2006, 03:03 PM) veryy niceee. i can only hit 2.52GHz @ 1.6Vc urs is E3? or E6? i have a 0525 like yours too, pretty crappy too week 20 should be an E3 3ghz? very unlikely
Card PM	Report Top Like Quote Reply

gsan	Jan 30 2006, 07:39 AM Show posts by this member only \| Post #34
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(newbieockids @ Jan 29 2006, 04:06 PM) frrm the stepping, i believe it was E3.. correct me if im wrong gsan.. gsan, push it to 3ghz ler.. yup, you're right i have to run it at 2.8G with 1.5v stable or below before pushing to higher. but i dont think that the chip will hit 3G with air cooling only. This post has been edited by gsan: Jan 30 2006, 07:39 AM
Card PM	Report Top Like Quote Reply

gengstapo	Jan 30 2006, 07:53 AM Show posts by this member only \| Post #35
Retired enthusiast All Stars 10,688 posts Joined: Jan 2005	QUOTE(gsan @ Jan 29 2006, 07:25 AM) CNY Updated: 2.8G @ 1.52v AMD Athlon 64 3200+ LBBLE 0520 FPMW Thermalright xp90c with 92mm @ 2.2k rpm aloo bro.. wat ur cooling system?? temp kinda nice eh
Card PM	Report Top Like Quote Reply

LittleLinnet	Jan 30 2006, 12:26 PM Show posts by this member only \| Post #36
Iophobia Senior Member 3,593 posts Joined: Feb 2005 From: *Penang*	he is using XP-90C FYI Don't know the temp trustable or not
Card PM	Report Top Like Quote Reply

Hyde`fK	Jan 30 2006, 01:11 PM Show posts by this member only \| Post #37
D9s Killer Senior Member 2,378 posts Joined: Jan 2003 From: Miri,Sarawak,Malaysia Status: Dead!	24C! In air-con room ar?
Card PM	Report Top Like Quote Reply

gsan	Jan 30 2006, 01:38 PM Show posts by this member only \| Post #38
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	not air cond room, but with side panel open, in the early morning, the weather quite cold.
Card PM	Report Top Like Quote Reply

mazdagtr210	Jan 30 2006, 09:14 PM Show posts by this member only \| Post #39
Casual Junior Member 320 posts Joined: Mar 2005	what about mine cpu-z http://valid.x86-secret.com/show_oc?id=51376 This post has been edited by mazdagtr210: Feb 2 2006, 07:34 PM
Card PM	Report Top Like Quote Reply

KilJim	Jan 30 2006, 09:24 PM Show posts by this member only \| Post #40
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	even if your ambient temp was 24C do u think your proc doesnt produce any heat at all?
Card PM	Report Top Like Quote Reply

mazdagtr210	Jan 30 2006, 09:26 PM Show posts by this member only \| Post #41
Casual Junior Member 320 posts Joined: Mar 2005	waa 24� only maa. my lowest temp only 26� but that in aircond condition loo
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 30 2006, 10:53 PM Show posts by this member only \| Post #42
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	mazda, need 8 hours or more.... your athlon64 haven't finished not even 1 loop of prime yet. use custom test, min 8K, max 512K, in-place FFT. run the stress with at least 8 hours.... or you can let your test finish 1 loop to know that the test already pass 1 loop.... check out the first set of test, it starts with 8K. it will finish a complete loop when the test begin again at 8K. p/s: check out the rules and requirements at the first page This post has been edited by soulfly: Jan 30 2006, 10:55 PM
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 1 2006, 02:33 AM Show posts by this member only \| Post #43
Casual Junior Member 320 posts Joined: Mar 2005	ok ok will try ....
Card PM	Report Top Like Quote Reply

siLDes	Feb 1 2006, 06:36 AM Show posts by this member only \| Post #44
Getting Started Junior Member 176 posts Joined: Jan 2003 From: Unknown	I still don't understand how to play this game ..
Card PM	Report Top Like Quote Reply

LittleLinnet	Feb 2 2006, 01:03 AM Show posts by this member only \| Post #45
Iophobia Senior Member 3,593 posts Joined: Feb 2005 From: *Penang*	this is not a game
Card PM	Report Top Like Quote Reply

ahpaul82	Feb 2 2006, 11:43 AM Show posts by this member only \| Post #46
.:保罗:. Senior Member 3,795 posts Joined: Jan 2003 From: .: Old Klang Road :.	updated result : ======================================== Short description: CPU: 300x9 @ 2700Mhz, 1.5v+110% RAM: DDR490, CL2.5-4-3-7-1T @ 2.8V ======================================== AMD64 3000+ Venice E3 LBBLE 0516CPBW @ 2700MHz (300HTTx9) 1.5v+110% stock cooling 2 x 512MB Corsair TwinX XMS PC3200 PRO v1.4, 245MHz at 2.5-4-3-7, 1T, 2.8vdimm DFI LanPartyUT NF4 SLI-D (BIOS 704-2BTA) 1.6v chipset Galaxy 6600GT (Zalman) PCI-E x16 (default speed) WD 40GB 8MB - IDE1 ASUS 52X CD-ROM - IDE2 Samsung Floppy Drive OCZ ModStream 520W PSU Window XP Pro SP2 This post has been edited by ahpaul82: Feb 3 2006, 12:21 AM
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 2 2006, 07:35 PM Show posts by this member only \| Post #47
Casual Junior Member 320 posts Joined: Mar 2005	ok update with 9 hours now ............
Card PM	Report Top Like Quote Reply

gsan	Feb 2 2006, 08:00 PM Show posts by this member only \| Post #48
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(mazdagtr210 @ Feb 2 2006, 07:35 PM) ok update with 9 hours now ............ 2.8G @ 1.47v push to the max ya
Card PM	Report Top Like Quote Reply

Cyclone87	Feb 3 2006, 12:38 AM Show posts by this member only \| Post #49
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	AMD64 3000+ Venice E6 0530XXXX @ 2600MHz (325HTTx8) 1.5v xp90 + 1.4k RPM Thermaltake UFO 80mm 2 x 512MB Old Sch BH5 PC3200 , 217MHz at 2-2-2-5, 1T, 2.8vdimm DFI NF4 Infinity non ultra Gecube x300/550 128bit PCI-E x16 (default speed) Maxtor 6Y080M0 ( 80GB 7200RPM 8M buffer) Liteon 16x DVDrom Samsung Floppy Drive Icute Capalang 450Watt 24pin PSU Window XP Pro SP2 My effort gone..should have post it after it pass 8hours or 80hours or 800hours..
Card PM	Report Top Like Quote Reply

grafreak	Feb 3 2006, 01:09 AM Show posts by this member only \| Post #50
New Member Junior Member 22 posts Joined: Jan 2006 From: Kuching, Sarawak, MY	QUOTE(siLDes @ Feb 1 2006, 06:36 AM) I still don't understand how to play this game .. ahaha you can say its a bit of a game la QUOTE(ahpaul82 @ Feb 2 2006, 11:43 AM) updated result : ======================================== Short description: CPU: 300x9 @ 2700Mhz, 1.5v+110% RAM: DDR490, CL2.5-4-3-7-1T @ 2.8V ======================================== AMD64 3000+ Venice E3 LBBLE 0516CPBW @ 2700MHz (300HTTx9) 1.5v+110% stock cooling 2 x 512MB Corsair TwinX XMS PC3200 PRO v1.4, 245MHz at 2.5-4-3-7, 1T, 2.8vdimm DFI LanPartyUT NF4 SLI-D (BIOS 704-2BTA) 1.6v chipset Galaxy 6600GT (Zalman) PCI-E x16 (default speed) WD 40GB 8MB - IDE1 ASUS 52X CD-ROM - IDE2 Samsung Floppy Drive OCZ ModStream 520W PSU Window XP Pro SP2 nice results. what ram u using? TCC series? the timings look like of a D43 but i rarely see cases where 245mhz hit 1t with those timings. QUOTE(Cyclone87 @ Feb 3 2006, 12:38 AM) AMD64 3000+ Venice E6 0530XXXX @ 2600MHz (325HTTx8) 1.5v xp90 + 1.4k RPM Thermaltake UFO 80mm 2 x 512MB Old Sch BH5 PC3200 , 217MHz at 2-2-2-5, 1T, 2.8vdimm DFI NF4 Infinity non ultra Gecube x300/550 128bit PCI-E x16 (default speed) Maxtor 6Y080M0 ( 80GB 7200RPM 8M buffer) Liteon 16x DVDrom Samsung Floppy Drive Icute Capalang 450Watt 24pin PSU Window XP Pro SP2 My effort gone..should have post it after it pass 8hours or 80hours or 800hours.. wahh kawan seriously u ran the torture test that long man?
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 3 2006, 02:21 AM Show posts by this member only \| Post #51
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(mazdagtr210 @ Feb 2 2006, 07:35 PM) ok update with 9 hours now ............ stepping?
Card PM	Report Top Like Quote Reply

LittleLinnet	Feb 3 2006, 02:38 AM Show posts by this member only \| Post #52
Iophobia Senior Member 3,593 posts Joined: Feb 2005 From: *Penang*	QUOTE(Cyclone87 @ Feb 3 2006, 12:38 AM) AMD64 3000+ Venice E6 0530XXXX @ 2600MHz (325HTTx8) 1.5v xp90 + 1.4k RPM Thermaltake UFO 80mm 2 x 512MB Old Sch BH5 PC3200 , 217MHz at 2-2-2-5, 1T, 2.8vdimm DFI NF4 Infinity non ultra Gecube x300/550 128bit PCI-E x16 (default speed) Maxtor 6Y080M0 ( 80GB 7200RPM 8M buffer) Liteon 16x DVDrom Samsung Floppy Drive Icute Capalang 450Watt 24pin PSU Window XP Pro SP2 My effort gone..should have post it after it pass 8hours or 80hours or 800hours.. you run prime continously for 1 year ?? OMG.....you are the man.....
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 3 2006, 03:51 AM Show posts by this member only \| Post #53
Casual Junior Member 320 posts Joined: Mar 2005	QUOTE(soulfly @ Feb 3 2006, 02:21 AM) stepping? stepping not remember can ask biatche coz last time bought from him.... malas nak bukak hsf la...
Card PM	Report Top Like Quote Reply

gsan	Feb 3 2006, 07:39 AM Show posts by this member only \| Post #54
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(LittleLinnet @ Feb 3 2006, 02:38 AM) you run prime continously for 1 year ?? OMG.....you are the man..... hehe.. if you look it carefully, you'll notice something. please refer to the pic below. if he really prime for 8763hours, the red arrow there should be can scroll very very very down. as i know, he is changing the date only. dont believe? try out yourself
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 3 2006, 03:52 PM Show posts by this member only \| Post #55
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(mazdagtr210 @ Feb 3 2006, 03:51 AM) stepping not remember can ask biatche coz last time bought from him.... malas nak bukak hsf la... actual vdimm applied? at least put your spec and settings like ahpaul82 did the database needs these details
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 3 2006, 07:53 PM Show posts by this member only \| Post #56
Casual Junior Member 320 posts Joined: Mar 2005	waaa at my siggy already stated there AMD 64 3000+ Venice E3 Asus Sli Deluxe Vdimm look at cpuz (around 1.475~1.5) PDP 4200 512Mb X2 40Gb HDDX2 Pata 80Gb Sata X1 NEC DVDRW Watercooling Setup if not enought im quit from this game .... This post has been edited by mazdagtr210: Feb 3 2006, 07:55 PM
Card PM	Report Top Like Quote Reply

apengfx-	Feb 3 2006, 09:18 PM Show posts by this member only \| Post #57
I'm a Master Trader. Senior Member 1,553 posts Joined: Jan 2003 From: Sniper Island is in your heart :)	QUOTE(mazdagtr210 @ Jan 30 2006, 09:14 PM) what about mine cpu-z http://valid.x86-secret.com/show_oc?id=51376 wow..vcore 1.47V
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 3 2006, 09:26 PM Show posts by this member only \| Post #58
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(mazdagtr210 @ Feb 3 2006, 07:53 PM) waaa at my siggy already stated there AMD 64 3000+ Venice E3 Asus Sli Deluxe Vdimm look at cpuz (around 1.475~1.5) PDP 4200 512Mb X2 40Gb HDDX2 Pata 80Gb Sata X1 NEC DVDRW Watercooling Setup if not enought im quit from this game .... lol.... it should be easier if u follow everything from the beginning - 8hours prime - bios set vcore (not reading from monitoring tool) - stepping (overclockers always pay attention to their cpu steppings) other overclocking forums can implement these kind of rules.... why don't we?
Card PM	Report Top Like Quote Reply

apengfx-	Feb 3 2006, 09:33 PM Show posts by this member only \| Post #59
I'm a Master Trader. Senior Member 1,553 posts Joined: Jan 2003 From: Sniper Island is in your heart :)	QUOTE(mazdagtr210 @ Feb 3 2006, 07:53 PM) waaa at my siggy already stated there AMD 64 3000+ Venice E3 Asus Sli Deluxe Vdimm look at cpuz (around 1.475~1.5) PDP 4200 512Mb X2 40Gb HDDX2 Pata 80Gb Sata X1 NEC DVDRW Watercooling Setup if not enought im quit from this game .... aiyo..dont quit la... sayang ooo..processor can go higher man...
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 3 2006, 10:00 PM Show posts by this member only \| Post #60
Casual Junior Member 320 posts Joined: Mar 2005	waa my vcore at bios 1.475 lorrrrrr hehehe This post has been edited by mazdagtr210: Feb 4 2006, 03:21 AM
Card PM	Report Top Like Quote Reply

ahpaul82	Feb 3 2006, 11:05 PM Show posts by this member only \| Post #61
.:保罗:. Senior Member 3,795 posts Joined: Jan 2003 From: .: Old Klang Road :.	QUOTE(grafreak @ Feb 3 2006, 01:09 AM) nice results. what ram u using? TCC series? the timings look like of a D43 but i rarely see cases where 245mhz hit 1t with those timings. Im using Corsair XMS 3200 PRO rev1.4. what chipset inside i have no idea (cannot open up and see ma ) , but from what i did in MEMTEST, i suspect is a TCCX RAMchip
Card PM	Report Top Like Quote Reply

gsan	Feb 4 2006, 02:01 AM Show posts by this member only \| Post #62
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(mazdagtr210 @ Feb 3 2006, 10:00 PM) waa my vdimn at bios 1.475 lorrrrrr hehehe just wonder that have you experience that BSOD and then restart when overclocking the proc with lower voltage? like now u already stable 2.8G 1.47v and what will happen if u try with 1.45v or even lower....
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 4 2006, 03:17 AM Show posts by this member only \| Post #63
Casual Junior Member 320 posts Joined: Mar 2005	cannot dude coz im reduce it to the lowest now... if under 1.475 cannot prime well.... will restart back
Card PM	Report Top Like Quote Reply

gsan	Feb 4 2006, 09:39 AM Show posts by this member only \| Post #64
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(mazdagtr210 @ Feb 4 2006, 03:17 AM) cannot dude coz im reduce it to the lowest now... if under 1.475 cannot prime well.... will restart back yaya... before restart got any blue screen shown?
Card PM	Report Top Like Quote Reply

mazdagtr210	Feb 4 2006, 11:20 PM Show posts by this member only \| Post #65
Casual Junior Member 320 posts Joined: Mar 2005	QUOTE(gsan @ Feb 4 2006, 09:39 AM) yaya... before restart got any blue screen shown? nope just restart only
Card PM	Report Top Like Quote Reply

ethanlow	Feb 6 2006, 04:32 PM Show posts by this member only \| Post #66
Getting Started Junior Member 245 posts Joined: Jan 2003 From: Malaysia	Air Cooling only This post has been edited by ethanlow: Feb 6 2006, 04:35 PM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 6 2006, 06:18 PM Show posts by this member only \| Post #67
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(ethanlow @ Feb 6 2006, 04:32 PM) Air Cooling only cpu stepping?
Card PM	Report Top Like Quote Reply

gsan	Feb 6 2006, 07:00 PM Show posts by this member only \| Post #68
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(ethanlow @ Feb 6 2006, 04:32 PM) Air Cooling only what's your psu?
Card PM	Report Top Like Quote Reply

ethanlow	Feb 8 2006, 10:09 PM Show posts by this member only \| Post #69
Getting Started Junior Member 245 posts Joined: Jan 2003 From: Malaysia	About the stepping ,sorry very mafan to take out cause pc full of junk and no time to take the cpu out.I will check it when it free Cooling= Zalman CNPS7000B-Cu PSU=Antec True Power 550w
Card PM	Report Top Like Quote Reply

cktee83	Feb 10 2006, 01:14 PM Show posts by this member only \| Post #70
New Member Junior Member 8 posts Joined: Feb 2006 From: JB	Hi all...here are my results... comments welcome... CPU : AMD Athlon64 3000+ (2.7GHz @ 338x8MHz, 1.600V) Core : Venice E6 LBBWE 0542 EPHW Socket : S939 RAM : 2x512MB Corsair ValueSelect (DDR450 2.5-3-3-8 2.60V) M/B : Abit KN8-Ultra PSU : iCUTE 'QIANG' 480W Cooling : ThermalTake SilentTower
Card PM	Report Top Like Quote Reply

redbull_y2k	Feb 10 2006, 05:54 PM Show posts by this member only \| Post #71
"Viva La Revolucion!" Senior Member 1,469 posts Joined: Jan 2003 From: YOU.ESS.JAY	anybody got a hold of the Manchester 3200+ ? The dual-core proc but with one core disabled and sold as A64 3200+. My fren has one but i haven't tried overclock it, coz it's not mine. So can't oc too much lah.... Cpu-Z screenshot
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 10 2006, 06:01 PM Show posts by this member only \| Post #72
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	should be equal to Venice E4
Card PM	Report Top Like Quote Reply

kurikuraX	Feb 11 2006, 10:41 PM Show posts by this member only \| Post #73
this section is optional Senior Member 907 posts Joined: Jan 2006 From: 124qn543x	I cant see anybody have and Ocing their LBBLE0519CPFW I bought this proc from one of the forumers here. Is this a good chip?
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 12 2006, 01:47 AM Show posts by this member only \| Post #74
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	u wont know if u don't try
Card PM	Report Top Like Quote Reply

rendl	Feb 15 2006, 12:54 AM Show posts by this member only \| Post #75
Getting Started Junior Member 217 posts Joined: Jan 2003	as above: ADA3200DKA4CG CDBHE 0550TPWM mine is as follows: idle temp - 43~44 full load - 53~54 Vcore = 1.4125 Vdimm = 2.80 (BT-D432) HTT = 3X mobo - Asus A8n-SLi HSF - Thermalright SLK948U wif Vantec Tornado (Sunon) any tips to improve pls share! This post has been edited by rendl*: Feb 15 2006, 12:59 AM
Card PM	Report Top Like Quote Reply

rendl	Feb 16 2006, 08:34 AM Show posts by this member only \| Post #76
Getting Started Junior Member 217 posts Joined: Jan 2003	hit a brickwall, trying to go further but not easy ler any1 can help?
Card PM	Report Top Like Quote Reply

ianho	Feb 17 2006, 02:22 AM Show posts by this member only \| Post #77
Cucimangkoklife VIP 15,705 posts Joined: Mar 2005 From: Tg. Rambutan	Aiyooooo. Didn't realise the 2005 ranking close shop oredi. I just put my old screenshot from the 2005 rankings boleh kar boss? The Prime is 7hours 19 minutes though. Last time no rule about 8 hours yet. Boleh kar? My stepping is ADA3000DAA4BP LBBLE0516GPBW. Vcore was 1.6V. This post has been edited by ianho: Feb 17 2006, 02:34 AM
Card PM	Report Top Like Quote Reply

KilJim	Feb 17 2006, 02:25 AM Show posts by this member only \| Post #78
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	rendl, up the voltage! gogo 1.6V
Card PM	Report Top Like Quote Reply

rendl	Feb 18 2006, 10:08 AM Show posts by this member only \| Post #79
Getting Started Junior Member 217 posts Joined: Jan 2003	mate, 1.6 will kill my manchester~ even @1.5 priming is already 59 degrees closed case... i think the RAM/mosfets/nb is holding me back... the manchester definitely can reach at least 2.7~2.8 @1.435 Vcore QUOTE(KilJim @ Feb 17 2006, 02:25 AM) rendl, up the voltage! gogo 1.6V
Card PM	Report Top Like Quote Reply

ianho	Feb 20 2006, 12:43 PM Show posts by this member only \| Post #80
Cucimangkoklife VIP 15,705 posts Joined: Mar 2005 From: Tg. Rambutan	No update 1? 7 hours 19 minutes Prime cannot kar?
Card PM	Report Top Like Quote Reply

KilJim	Feb 20 2006, 12:51 PM Show posts by this member only \| Post #81
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(rendl @ Feb 18 2006, 10:08 AM) mate, 1.6 will kill my manchester~ even @1.5 priming is already 59 degrees closed case... i think the RAM/mosfets/nb is holding me back... the manchester definitely can reach at least 2.7~2.8 @1.435 Vcore hmm....is 1.6 very high for a manchester? so far on the Venices i've tried, up to almost 1.7V is okay for benching
Card PM	Report Top Like Quote Reply

o23ff	Feb 23 2006, 12:37 AM Show posts by this member only \| Post #82
New Member Junior Member 6 posts Joined: Jan 2005 From: Kedah	AMD64 Venice E6 3000+ LBBWE 0542GPAW @ 2754mhz (306HTTx9) 1.67v(1.55x110%) WaterCooling DFI LanPartyUT NF4 ULTRA-D
Card PM	Report Top Like Quote Reply

cktee83	Feb 23 2006, 01:34 PM Show posts by this member only \| Post #83
New Member Junior Member 8 posts Joined: Feb 2006 From: JB	Wah.... superb! Btw why SP2004 showing the wrong FSB and multiplier?
Card PM	Report Top Like Quote Reply

anarchist	Feb 23 2006, 03:50 PM Show posts by this member only \| Post #84
Getting Started Junior Member 268 posts Joined: Jan 2005	damn i should have check mine fully 1st... hopefull kingmaker_20 will post it...
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 23 2006, 06:39 PM Show posts by this member only \| Post #85
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(anarchist @ Feb 23 2006, 03:50 PM) damn i should have check mine fully 1st... hopefull kingmaker_20 will post it... I'll try my best bro.
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 23 2006, 08:24 PM Show posts by this member only \| Post #86
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(cktee83 @ Feb 23 2006, 01:34 PM) Wah.... superb! Btw why SP2004 showing the wrong FSB and multiplier? it's normal sp2004 bug
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 05:05 AM Show posts by this member only \| Post #87
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	soulfly@ I suggest that you could add another rule in the list, Cpu-z for the screenshot must be the latest version,if im not wrong for now v1.32 is the latest one and the voltage reading is accurate.This is to avoid wrong voltage readings,as we know the previous version do play hide and seek. Suggestion: If the submited Cpu-z screenshot is not the latest version(v1.32),that ranking will not be count in our database. anarchist@ Its now 5:10am ,still priming the chip.I'll blast the screnez very soon,if nothing wrong happens.Wish me luck lol
Card PM	Report Top Like Quote Reply

ah_khoo	Feb 24 2006, 05:32 AM Show posts by this member only \| Post #88
- No Action Talk Only - Elite 8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.	It's a big efford if those who posted b4 need to do d primin again, quite hassle as not everyone runnin their chip on 24/7 basis. some more, d rankin is not rated on voltage used, it's judged by d clock speed, isn't it? bout d voltage thingy, it's up to d poster to provide d real voltage used to do achieve d stable clock. no point cheatin as one can't cheat 'himself... no such thing as software showin accurate readin, as dmm is d most accurate one...
Card PM	Report Top Like Quote Reply

sup3rfly	Feb 24 2006, 11:01 AM Show posts by this member only \| Post #89
Techno Slave Senior Member 1,561 posts Joined: Jan 2003 From: 秋葉原電気街	ok i have checked mine with cpu-z 1.32..... the voltage is still 1.552v... i wish it was lower >.<
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 24 2006, 11:03 AM Show posts by this member only \| Post #90
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	i only want BIOS SET VCORE software reading is not important
Card PM	Report Top Like Quote Reply

anarchist	Feb 24 2006, 12:15 PM Show posts by this member only \| Post #91
Getting Started Junior Member 268 posts Joined: Jan 2005	@kingmaker_20 good luck man im gonna try my new 0606 revision and see how it does... by the way what voltage you running at? was it 2.5ghz @ 1.36v @ stock HSF ? did you use the standard or different thermal paste?
Card PM	Report Top Like Quote Reply

anarchist	Feb 24 2006, 12:15 PM Show posts by this member only \| Post #92
Getting Started Junior Member 268 posts Joined: Jan 2005	wanted to post somewhere else but accidently posted here This post has been edited by anarchist: Feb 24 2006, 12:16 PM
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 12:33 PM Show posts by this member only \| Post #93
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(soulfly @ Feb 24 2006, 11:03 AM) i only want BIOS SET VCORE software reading is not important Ok,its just a suggestion ah_khoo@ Anyway,as mention by soulfly before this database shouldn't be for only show off/ranking thingy,its more to reffrence.So it is the best if we could provide the real vcore etc and of course its up to individu king's 2cent. This post has been edited by kingmaker_20: Feb 24 2006, 01:34 PM
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 12:48 PM Show posts by this member only \| Post #94
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Here's mine: LBBLE 0522 FPBW Idle temp - 38C-40C(BIOS 42C) Full load - 43C-44C(BIOS should be 46C-48C) Vcore = 1.36V(STOCK) Vdimm = 3.00V (512MB TWSP BH-5) LDT = 3X HTT - 278x9 Mobo - DFI LP UT NF4 SLI-D HSF - AMD STOCK HSF This post has been edited by kingmaker_20: Feb 24 2006, 12:52 PM
Card PM	Report Top Like Quote Reply

anarchist	Feb 24 2006, 12:58 PM Show posts by this member only \| Post #95
Getting Started Junior Member 268 posts Joined: Jan 2005	hehehe good chip eh? you got a gem from me man... anyway 2.5ghz @ 1.36 @ stock cooler you can go slightly higher than that on stock, try it....
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 01:09 PM Show posts by this member only \| Post #96
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(anarchist @ Feb 24 2006, 12:58 PM) hehehe good chip eh? you got a gem from me man... anyway 2.5ghz @ 1.36 @ stock cooler you can go slightly higher than that on stock, try it.... Acctually i love to clock any chip without raising the vcore,get to the max with burn-in first,then i'll consider adding the vcore later on. Sorry,forgot to mention,both Cpu and chip applied with AS5. p/s: My Smartguardian is special LYN moded edition still under beta. And again,thanks anarchist for the superb chip. This post has been edited by kingmaker_20: Feb 24 2006, 01:37 PM
Card PM	Report Top Like Quote Reply

ClessRV	Feb 24 2006, 04:04 PM Show posts by this member only \| Post #97
Enthusiast Junior Member 702 posts Joined: Jan 2006	I want to ask siawgu something about his ex-proc, the AMD Athlon 64 3000+ 0530, i have the exactly same proc and i want to ask what is the highest HTT and stable that you can get using only air cooling and on stock vcore? and if it's not a bother, can you give me your config for it including memory setting and such? if others can help, i will be really appreciate it. Thank you.
Card PM	Report Top Like Quote Reply

sjn hassan	Feb 24 2006, 04:11 PM Show posts by this member only \| Post #98
Member's of MAKAN MEGGI club Senior Member 3,544 posts Joined: Jan 2003 From: United States of Cybertron	what is the highest VCORE for VEnice??Afraid the vcore may fry my cpu
Card PM	Report Top Like Quote Reply

KilJim	Feb 24 2006, 04:17 PM Show posts by this member only \| Post #99
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	i normally limit myself to 1.7V (set in bios, detected slightly lower) on air cooling for benching only of course but most ppl would say that will fry your proc
Card PM	Report Top Like Quote Reply

anarchist	Feb 24 2006, 05:48 PM Show posts by this member only \| Post #100
Getting Started Junior Member 268 posts Joined: Jan 2005	heheh kingmaker i help you burn in abit already what b4... so should be ok now unless you wanna go more la...
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 07:29 PM Show posts by this member only \| Post #101
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(anarchist @ Feb 24 2006, 05:48 PM) heheh kingmaker i help you burn in abit already what b4... so should be ok now unless you wanna go more la... Pls cut the crap I try priming on 2.4Ghz and dint pass.I've burn it for 1 days plus to achieve this and how much MHZ you expect after burn in?
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 24 2006, 10:15 PM Show posts by this member only \| Post #102
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	if your processor had not enough burn-in at the factory, you might have better result
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 10:54 PM Show posts by this member only \| Post #103
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(soulfly @ Feb 24 2006, 10:15 PM) if your processor had not enough burn-in at the factory, you might have better result Din't get what you trying to say.Mind to elaborate?Any proof for your statement?
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 24 2006, 11:02 PM Show posts by this member only \| Post #104
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	I don't need any proof. If you don't already know.... burn-in is a process in speed binning. Somehow burn-in method done by users refined what's done at the factory. So... it depends on luck whether you get big, small or no improvement at all.
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 11:10 PM Show posts by this member only \| Post #105
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(soulfly @ Feb 24 2006, 11:02 PM) I don't need any proof. If you don't already know.... burn-in is a process in speed binning. Somehow burn-in method done by users refined what's done at the factory. So... it depends on luck whether you get big, small or no improvement at all. Owh,got it.thanks for the explaination.
Card PM	Report Top Like Quote Reply

ah_khoo	Feb 24 2006, 11:22 PM Show posts by this member only \| Post #106
- No Action Talk Only - Elite 8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.	QUOTE(kingmaker_20 @ Feb 24 2006, 07:29 PM) Pls cut the crap I try priming on 2.4Ghz and dint pass.I've burn it for 1 days plus to achieve this and how much MHZ you expect after burn in? bear in mind that not every chip can clock impressively straight outta box.
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 24 2006, 11:26 PM Show posts by this member only \| Post #107
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(ah_khoo @ Feb 24 2006, 11:22 PM) bear in mind that not every chip can clock impressively straight outta box. Bro this chip used 5 months plus.
Card PM	Report Top Like Quote Reply

anarchist	Feb 25 2006, 09:37 PM Show posts by this member only \| Post #108
Getting Started Junior Member 268 posts Joined: Jan 2005	weird..... unless maybe i never use for some time di, but that shouldnt make a difference right... oh well..... This post has been edited by anarchist: Feb 26 2006, 12:01 AM
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 26 2006, 04:32 AM Show posts by this member only \| Post #109
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(anarchist @ Feb 25 2006, 09:37 PM) weird..... unless maybe i never use for some time di, but that shouldnt make a difference right... oh well..... Motherboard might made the diffrence.Anyway did you run Prime for 8hours?same speed and vcore?
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 26 2006, 01:43 PM Show posts by this member only \| Post #110
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Here's an update LBBLE 0522 FPBW Idle temp - 40C-41C(BIOS 43C) Full load - 46C-48C(BIOS should be 50C++) Vcore = 1.36V(STOCK) Vdimm = 3.20V (512MB TWSP BH-5) LDT = 3X HTT - 289x9 Mobo - DFI LP UT NF4 SLI-D HSF - AMD STOCK HSF
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 28 2006, 04:08 PM Show posts by this member only \| Post #111
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Venice stock/default volt 1.4v?? soulfly@try to look at the database list i can even see 1.34v?
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 28 2006, 05:03 PM Show posts by this member only \| Post #112
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	kianwee's result removed Venice default voltage is 1.4V. I really wonder how come you don't know about this.
Card PM	Report Top Like Quote Reply

kingmaker_20	Feb 28 2006, 10:47 PM Show posts by this member only \| Post #113
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(soulfly @ Feb 28 2006, 05:03 PM) kianwee's result removed Venice default voltage is 1.4V. I really wonder how come you don't know about this. Its not about i know or you know,that's the reading in bios and most of the overclockers or overclockers database follow the voltage in bios but im not telling that we must follow them.You have come out with new thing and that's exactly good. Im still new and learning new things about overclocking everyday.So let's try to make our database more accurate eventhough i know most of the rankings cpu voltage in our database does not follow the real or bios reading. Suggestion: Could you pls update the first post regarding this issue,i mean cpu voltage,so we all can easily understand about it while looking at the rules&regulation.
Card PM	Report Top Like Quote Reply

TSsoulfly	Feb 28 2006, 11:36 PM Show posts by this member only \| Post #114
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	I should say that it's better to trust of what we do, not of what we see Regarding the voltage.... the rationale behind it was, to get the result at the particular setup that we wanted. For example, we want the cpu to run at 2500mhz at 1.4v.... that is the setting that we want, not 1.36V or 1.41v eventhough the reading shows different value.
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 1 2006, 01:07 AM Show posts by this member only \| Post #115
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(soulfly @ Feb 28 2006, 11:36 PM) I should say that it's better to trust of what we do, not of what we see Regarding the voltage.... the rationale behind it was, to get the result at the particular setup that we wanted. For example, we want the cpu to run at 2500mhz at 1.4v.... that is the setting that we want, not 1.36V or 1.41v eventhough the reading shows different value. Ok nice,hope everyone could understand this. Cheers.
Card PM	Report Top Like Quote Reply

gsan	Mar 1 2006, 09:27 AM Show posts by this member only \| Post #116
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	kingmaker_20, what psu you used to overclock the proc? 2.6 @ 1.36v is kinda impressive leh... my 0520 seem cannot do that well.
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 1 2006, 02:51 PM Show posts by this member only \| Post #117
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(gsan @ Mar 1 2006, 09:27 AM) kingmaker_20, what psu you used to overclock the proc? 2.6 @ 1.36v is kinda impressive leh... my 0520 seem cannot do that well. Using enlight 450w power tank Im aiming for acbel 450w ipower,the amps are better than my enlight.Your's sold?
Card PM	Report Top Like Quote Reply

Cyclone87	Mar 3 2006, 08:01 PM Show posts by this member only \| Post #118
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	From the Database..LLBWE seem doing not that good compare to LLBLE. I just got few LLBWE today from amd.
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 3 2006, 10:17 PM Show posts by this member only \| Post #119
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(Cyclone87 @ Mar 3 2006, 08:01 PM) From the Database..LLBWE seem doing not that good compare to LLBLE. I just got few LLBWE today from amd. Should be LBBWE(E6) its doing pretty good especially 3000+,2.8GHZ maybe but not sure about the voltage.
Card PM	Report Top Like Quote Reply

Zicron	Mar 7 2006, 02:22 PM Show posts by this member only \| Post #120
Come to the Dark Side Senior Member 899 posts Joined: Mar 2005 From: Klang	I tried to OC from 1.8ghz to 2.0ghz 1.5v, but when restart my monitor blank and i hv to reset CMOS, can tell me y? BTW, im noob here =.=" so can tell me wats is stepping and how to do it?
Card PM	Report Top Like Quote Reply

TSsoulfly	Mar 7 2006, 04:36 PM Show posts by this member only \| Post #121
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(Zicron @ Mar 7 2006, 02:22 PM) I tried to OC from 1.8ghz to 2.0ghz 1.5v, but when restart my monitor blank and i hv to reset CMOS, can tell me y? BTW, im noob here =.=" so can tell me wats is stepping and how to do it? I suggest that you read the Fundamentals of Overclocking thread. Everything is in there. This place is for database discussions only. Please read. Don't expect to be spoonfed all the time.
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 10 2006, 02:45 PM Show posts by this member only \| Post #122
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Updated LBBLE 0522 FPBW Idle temp - 41C-43C Full load - 50C-53C Vcore = 1.475V Vdimm = 3.20V (512MB TWSP BH-5) LDT = 3X HTT - 303x9 Mobo - DFI LP UT NF4 SLI-D HSF - AMD STOCK HSF
Card PM	Report Top Like Quote Reply

Cyclone87	Mar 11 2006, 02:14 PM Show posts by this member only \| Post #123
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	AMD64 3000+ Venice E6 LLBWE 0542FPCW @ 2600MHz 0.96v(Serial : 13801 -Staff Ver ) CoolerMaster Vortex Cooler 1GBkit UCCC with brainpower PC3200 Gigabyte K8N-SLi BBA FireGL V3100 PCI-E x16 (525/550) Maxtor 40GB 8MB - IDE1 Liteon DVDrom 16X - IDE2 Maxtor 80GB SATA - Sata3 Samsung Floppy Drive Icute 450Watt DualRail 24pin Twin Fan Window XP Pro SP2 This post has been edited by Cyclone87: Mar 11 2006, 05:58 PM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

TSsoulfly	Mar 11 2006, 02:16 PM Show posts by this member only \| Post #124
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	LLBWE ar.... not LBBWE? your voltage crazy summore. what V you set in BIOS? This post has been edited by soulfly: Mar 11 2006, 02:17 PM
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 11 2006, 02:30 PM Show posts by this member only \| Post #125
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Updated.I think this is the max for my stock cooler and i think i'm not going to raise the vcore anymore LBBLE 0522 FPBW Idle temp - 41C-45C Full load - 50C-55C Vcore = 1.5V Vdimm = 3.20V (512MB TWSP BH-5) LDT = 3X HTT - 306x9 Mobo - DFI LP UT NF4 SLI-D HSF - AMD STOCK HSF
Card PM	Report Top Like Quote Reply

Cyclone87	Mar 11 2006, 02:47 PM Show posts by this member only \| Post #126
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	QUOTE(soulfly @ Mar 11 2006, 02:16 PM) LLBWE ar.... not LBBWE? your voltage crazy summore. what V you set in BIOS? It stock voltage..and it LBBWE..typo. Anyway..i already update latest bios..the reading stil the same.
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 11 2006, 08:05 PM Show posts by this member only \| Post #127
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(Cyclone87 @ Mar 11 2006, 02:47 PM) It stock voltage..and it LBBWE..typo. Anyway..i already update latest bios..the reading stil the same. What vcore you set in bios? You mean you didn't touch the vcore settings in bios? This post has been edited by kingmaker_20: Mar 11 2006, 08:07 PM
Card PM	Report Top Like Quote Reply

Cyclone87	Mar 12 2006, 12:36 AM Show posts by this member only \| Post #128
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	QUOTE(kingmaker_20 @ Mar 11 2006, 08:05 PM) What vcore you set in bios? You mean you didn't touch the vcore settings in bios? Yea..that is my first attempt booting with just increase in HTT,HTT ratio 3x and Divider333 and CnQ and spread spectum is Disable..anyway...more result tmr..Hoping 2.8ghz at least by tmr. I suspect the mobo read wrong reading..or the staff ver is abit abnormal.
Card PM	Report Top Like Quote Reply

kazama	Mar 15 2006, 03:56 PM Show posts by this member only \| Post #129
Getting Started Junior Member 58 posts Joined: Jan 2003 From: putrajaya->cyberjaya->beseri	Participating Description: Processor: AMD Opteron 146 (CABYE 0540FPMW) thx to dinster Mobo: DFI Lanparty NF4 Ultra-D Bios Set V: VID=1.45 with 110% special Cooling: Air with Thermalright SI-120 Ram: Gskill FX Psu: Hiper R 580W. thx to kingmaker_20 others at my siggy. This post has been edited by kazama: Mar 15 2006, 03:57 PM
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 17 2006, 01:17 AM Show posts by this member only \| Post #130
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(kazama @ Mar 15 2006, 03:56 PM) Participating Description: Processor: AMD Opteron 146 (CABYE 0540FPMW) thx to dinster Mobo: DFI Lanparty NF4 Ultra-D Bios Set V: VID=1.45 with 110% special Cooling: Air with Thermalright SI-120 Ram: Gskill FX Psu: Hiper R 580W. thx to kingmaker_20 others at my siggy. Oh,someone mention my nick Ur welcome bro,nice clock you have there and the chip too.
Card PM	Report Top Like Quote Reply

magiara	Mar 23 2006, 02:29 PM Show posts by this member only \| Post #131
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	Idle temp - 28C - 30C Full load - 45C-48C Vcore = 1.66V Vdimm = 2.70V (2x512MB Corsair VS DDR400) LDT = 3X HTT - 289x9 Mobo - Jetway 939GT4-SLi-G-OC HSF - TT Big Typhoon + Delta Tri-blade 120mm Screenshot : This post has been edited by magiara: Mar 23 2006, 02:30 PM
Card PM	Report Top Like Quote Reply

TSsoulfly	Mar 23 2006, 06:28 PM Show posts by this member only \| Post #132
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	magiara, your cpu stepping?
Card PM	Report Top Like Quote Reply

magiara	Mar 26 2006, 03:14 AM Show posts by this member only \| Post #133
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(soulfly @ Mar 23 2006, 06:28 PM) magiara, your cpu stepping? LBBWE 0544FPCW anyway, is my stepping good? i dunno anything about stepping..
Card PM	Report Top Like Quote Reply

kingmaker_20	Mar 26 2006, 03:53 AM Show posts by this member only \| Post #134
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Google your stepping code and u'll know how good it is.
Card PM	Report Top Like Quote Reply

KilJim	Mar 27 2006, 11:26 PM Show posts by this member only \| Post #135
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	you've already tested, why bother searching for more details?
Card PM	Report Top Like Quote Reply

magiara	Mar 28 2006, 01:55 PM Show posts by this member only \| Post #136
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	help me google
Card PM	Report Top Like Quote Reply

amok	Apr 5 2006, 04:59 PM Show posts by this member only \| Post #137
schhhhwwiiiiiiinggggggg Elite 739 posts Joined: Jan 2003 From: Macau?	wanna join lar... CPU : AMD OPTERON 144 : CAB2E 0602GPAW BIOS Set Vcore : 1.425V BIOS Set Vdimm: 2.8 V Mobo: DFI NF4 DAGF Cooling : Watercooled (Swiftech MCW6002 + Nirox P2800 + Bulkhy Rad) RAM : 2 x 512M KVR3200 DT-D43 : 2.5-4-3-8 (1CL) Dual Channel The rest in my sig.
Card PM	Report Top Like Quote Reply

PCcrazy	Apr 5 2006, 09:56 PM Show posts by this member only \| Post #138
Milanista Senior Member 3,224 posts Joined: Jan 2003 From: B.B.Bangi	Wow, you are getting that results with only DAGF? It must be damn frightening experience tweaking that mobo. So, is that all the proc could do? or mobo is holding you down? Great result anyway.
Card PM	Report Top Like Quote Reply

KidsCode	Apr 5 2006, 10:21 PM Show posts by this member only \| Post #139
-----NoLimits!----- Elite 6,649 posts Joined: Jan 2003 From: At the end...	Ppl, want to ask something on o/c on AMD64. I know this question been ask alot of time, but still need 2nd opinion again. As just got my new Opteron 144, still tweaking it. Which is really prefer: 1. Max the core speed but using non 1:1 divider 2. Max the FSB running on 1:1 divider Understand that in AMD64 o/c max on the HTT is more important then the max on FSB on the 1:1 divider. Correct me if you think that Im getting something wrong here... Thanz for helping... (mod let me know if this is not a place to post this)
Card PM	Report Top Like Quote Reply

amok	Apr 5 2006, 11:12 PM Show posts by this member only \| Post #140
schhhhwwiiiiiiinggggggg Elite 739 posts Joined: Jan 2003 From: Macau?	QUOTE(PCcrazy @ Apr 5 2006, 09:56 PM) Wow, you are getting that results with only DAGF? It must be damn frightening experience tweaking that mobo. So, is that all the proc could do? or mobo is holding you down? Great result anyway. tenkiu, tenkiu... long time no see u.. still regard u as a living dictionary , I don't think had reached the proc limit yet.. still burnin in. well DAGF wuz not that bad (considering I bought it 2nd hand from dinster)... I'd needed like 1.65V fer the chipset.. stock cooling really a let down..(use a 12cm 63cfm fan over the NF4) which ended up wif loads of error on the i/o and peripherals, annen the 400Watter Enlight Power Tank PSU .. ermmm... then those KVR DT's.. just couldn't cut above 247MHz... . aiyaaaa.. a lot of limitation.. neway my primary objective now is to get a high end result wif oni budget or low end parts.. (just look at the spec in my sig ). Yup have to rely on loads of tweaking and tuning... and mebbe some might consider it a waste of time, but hey this is what overclocking all about isn't it? Max perf with minimum moolah.
Card PM	Report Top Like Quote Reply

kulus	Apr 6 2006, 01:19 AM Show posts by this member only \| Post #141
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	amok..now is the right time for u to change ur psu lor..
Card PM	Report Top Like Quote Reply

KilJim	Apr 6 2006, 01:53 AM Show posts by this member only \| Post #142
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(KidsCode @ Apr 5 2006, 10:21 PM) Ppl, want to ask something on o/c on AMD64. I know this question been ask alot of time, but still need 2nd opinion again. As just got my new Opteron 144, still tweaking it. Which is really prefer: 1. Max the core speed but using non 1:1 divider 2. Max the FSB running on 1:1 divider Understand that in AMD64 o/c max on the HTT is more important then the max on FSB on the 1:1 divider. Correct me if you think that Im getting something wrong here... Thanz for helping... (mod let me know if this is not a place to post this) That depends on how big a difference there is between the 2 If your max proc speed is 3ghz @ 333HTT X 9 and your rams can only do, say 280mhz, you'll be running 2.52ghz @ 280HTT X 9 There's such a big difference in speed that that the obvious choice would be the proc's speed If its 2.7ghz @ 300HTT X 9 and your rams can do 295mhz, then going for 295HTT X 9 might be a better choice Just hit for the highest proc speed, then figure out what dividers to put on Btw, the proper thread is here http://forum.lowyat.net/index.php?showtopic=239123&st=260
Card PM	Report Top Like Quote Reply

TSsoulfly	Apr 6 2006, 10:27 AM Show posts by this member only \| Post #143
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(KidsCode @ Apr 5 2006, 10:21 PM) Ppl, want to ask something on o/c on AMD64. I know this question been ask alot of time, but still need 2nd opinion again. As just got my new Opteron 144, still tweaking it. Which is really prefer: 1. Max the core speed but using non 1:1 divider 2. Max the FSB running on 1:1 divider Understand that in AMD64 o/c max on the HTT is more important then the max on FSB on the 1:1 divider. Correct me if you think that Im getting something wrong here... Thanz for helping... (mod let me know if this is not a place to post this) The most important thing is the highest clockspeed. If there are two different settings with the same clockspeed, go for with the one that provides higher DDR speed. Divider and multiplier does not really matter at all, because their existence is just virtually.
Card PM	Report Top Like Quote Reply

magiara	Apr 9 2006, 06:55 PM Show posts by this member only \| Post #144
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(kev da man @ Apr 9 2006, 01:38 PM) mine on air, steppings will be posted up in the same post tomorrow as the pics are in my office XD gigabyte k8nf-9 1GB KVR d-43 stock heatsink voltage 1.52 vcore, vdimm 2.7 prime for more than 8 hours bro!
Card PM	Report Top Like Quote Reply

kev da man	Apr 10 2006, 08:08 AM Show posts by this member only \| Post #145
super lurker All Stars 15,278 posts Joined: Jan 2003	woot. couldnt get it to run properly @ 2.7GHz, so here's the max stable OC LBBWE 0603APBW A64 3000+ Gigabyte K8NF-9 1GB KVR D-43 bios set vcore - 1.5 vdimm - stock cooling - stock HT divider 1 ram/cpu divider 2 / 1.33 (i think) This post has been edited by kev da man: Apr 10 2006, 09:45 AM
Card PM	Report Top Like Quote Reply

ah_khoo	Apr 10 2006, 10:30 PM Show posts by this member only \| Post #146
- No Action Talk Only - Elite 8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.	Short description: cpu: 295x9 @ 2610Mhz, 1.43 (BIOS set) ram: DDR480, CL2.5-4-3-7-1T @ 2.6V ======================================== AMD Athlon 64 3000+ 0516GPBW Rev. E3 DFI LANParty UT nF4-D (704-2BTA) > SLi & SATA2 Enabled 2x512MB OCZ Premier DDR400 (Alibaba chipy ) This post has been edited by ah_khoo: Apr 11 2006, 06:08 AM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

Cyclone87	Apr 11 2006, 10:19 AM Show posts by this member only \| Post #147
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	QUOTE(PCcrazy @ Apr 5 2006, 09:56 PM) Wow, you are getting that results with only DAGF? It must be damn frightening experience tweaking that mobo. So, is that all the proc could do? or mobo is holding you down? Great result anyway. DFi DAGF rename to DFI infinity nF4 and using almost the same bios like DFI infinity nf4 SLi and Ultra ver. So no doubt it doing good.
Card PM	Report Top Like Quote Reply

kulus	Apr 11 2006, 12:00 PM Show posts by this member only \| Post #148
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	yeahh..infinity series is as good as Lp series..but the layout
Card PM	Report Top Like Quote Reply

KilJim	Apr 11 2006, 10:37 PM Show posts by this member only \| Post #149
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	Here's mine : Opteron 144 CAB2E 0602GPAW DFI LanParty NF4 Ultra-D 1 x 1024mb Infineon DDR333 BE-6 XP-90C, mid level fan, no air-cond This post has been edited by KilJim: Apr 18 2006, 12:33 AM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

tAmp0i	Apr 13 2006, 06:57 PM Show posts by this member only \| Post #150
The name is Poi Senior Member 2,825 posts Joined: Jan 2003 From: Miri	Joining the league... Opteron 146 [CAB2E 0540FPMW] @ 3.0GHz [300x10], 1.45v + 104% DFI LP UT nF4 Ultra-D 2x 256MB Kingston HyperX PC3200 @ 250MHz [2.0-2-5-2], 3.2v OCZ PowerStream 520Watt Fanless room, non-aircond This post has been edited by tAmp0i: Apr 13 2006, 06:57 PM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

gsan	Apr 13 2006, 07:07 PM Show posts by this member only \| Post #151
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(tAmp0i @ Apr 13 2006, 06:57 PM) Joining the league... Opteron 146 [CAB2E 0540FPMW] @ 3.0GHz [300x10], 1.45v + 104% DFI LP UT nF4 Ultra-D 2x 256MB Kingston HyperX PC3200 @ 250MHz [2.0-2-5-2], 3.2v OCZ PowerStream 520Watt Fanless room, non-aircond bro, what cooling system you used ya?
Card PM	Report Top Like Quote Reply

tAmp0i	Apr 13 2006, 07:29 PM Show posts by this member only \| Post #152
The name is Poi Senior Member 2,825 posts Joined: Jan 2003 From: Miri	QUOTE(gsan @ Apr 13 2006, 07:07 PM) bro, what cooling system you used ya? Scythe Ninja Plus
Card PM	Report Top Like Quote Reply

kingmaker_20	Apr 13 2006, 08:56 PM Show posts by this member only \| Post #153
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(tAmp0i @ Apr 13 2006, 07:29 PM) Scythe Ninja Plus Nice one there,how about pushing it more?
Card PM	Report Top Like Quote Reply

tAmp0i	Apr 14 2006, 03:10 PM Show posts by this member only \| Post #154
The name is Poi Senior Member 2,825 posts Joined: Jan 2003 From: Miri	QUOTE(kingmaker_20 @ Apr 13 2006, 08:56 PM) Nice one there,how about pushing it more? I'll be trying to prime at higher clock speed but 8 hours is a pain in the arse
Card PM	Report Top Like Quote Reply

kulus	Apr 14 2006, 03:21 PM Show posts by this member only \| Post #155
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	QUOTE(KilJim @ Apr 11 2006, 10:37 PM) Here's mine Will post the details in a while bro..ur temp in screenies by using XP90C ka?
Card PM	Report Top Like Quote Reply

redbull_y2k	Apr 14 2006, 03:57 PM Show posts by this member only \| Post #156
"Viva La Revolucion!" Senior Member 1,469 posts Joined: Jan 2003 From: YOU.ESS.JAY	QUOTE(kulus @ Apr 14 2006, 03:21 PM) bro..ur temp in screenies by using XP90C ka? wow.... i've just notice that. The temps are all very high, scary man.
Card PM	Report Top Like Quote Reply

gsan	Apr 14 2006, 08:49 PM Show posts by this member only \| Post #157
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(kulus @ Apr 14 2006, 03:21 PM) bro..ur temp in screenies by using XP90C ka? nope, i think that he used ninja too
Card PM	Report Top Like Quote Reply

kulus	Apr 15 2006, 12:55 AM Show posts by this member only \| Post #158
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	QUOTE(gsan @ Apr 14 2006, 08:49 PM) nope, i think that he used ninja too using ninja but temp still 58C izzit opty giv more heat compare with venice?
Card PM	Report Top Like Quote Reply

KilJim	Apr 15 2006, 01:06 AM Show posts by this member only \| Post #159
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	Nah they're with the 90C Yupp, temps area always higher than normal Since the P4 days, Infinity board and this Ultra-D it's been like this
Card PM	Report Top Like Quote Reply

gsan	Apr 15 2006, 09:23 AM Show posts by this member only \| Post #160
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(KilJim @ Apr 15 2006, 01:06 AM) Nah they're with the 90C Yupp, temps area always higher than normal Since the P4 days, Infinity board and this Ultra-D it's been like this bro, I tot your xp90c was sold to someone already?
Card PM	Report Top Like Quote Reply

apengfx-	Apr 15 2006, 12:51 PM Show posts by this member only \| Post #161
I'm a Master Trader. Senior Member 1,553 posts Joined: Jan 2003 From: Sniper Island is in your heart :)	QUOTE(Cyclone87 @ Apr 11 2006, 10:19 AM) DFi DAGF rename to DFI infinity nF4 and using almost the same bios like DFI infinity nf4 SLi and Ultra ver. So no doubt it doing good. so..how the board perform?..got the i/o panel that i sent?
Card PM	Report Top Like Quote Reply

Cyclone87	Apr 15 2006, 12:55 PM Show posts by this member only \| Post #162
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	QUOTE(hafifee @ Apr 15 2006, 12:51 PM) so..how the board perform?..got the i/o panel that i sent? Yea got it..anyway..it doing the same like my old DAGF except the box is different abit. Bios all the same. Doing 306*9 on my venice 3000+.
Card PM	Report Top Like Quote Reply

kulus	Apr 15 2006, 01:24 PM Show posts by this member only \| Post #163
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	if compare with NF4 Ultra Infinity..which board is the best? This post has been edited by kulus: Apr 15 2006, 01:24 PM
Card PM	Report Top Like Quote Reply

Cyclone87	Apr 15 2006, 02:43 PM Show posts by this member only \| Post #164
Regular Senior Member 1,254 posts Joined: Jan 2003 From: Penang	QUOTE(kulus @ Apr 15 2006, 01:24 PM) if compare with NF4 Ultra Infinity..which board is the best? Overclocking result ..is the same. all the same..Except..Ultra got Sata2 but..around rm100 more expensive. So if u wan to use SATA2..den Ultra..if not..Normal ver.
Card PM	Report Top Like Quote Reply

KilJim	Apr 15 2006, 03:10 PM Show posts by this member only \| Post #165
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(gsan @ Apr 15 2006, 09:23 AM) bro, I tot your xp90c was sold to someone already? Haha, i sold it to you to get a Ninja Then traded the Ninja for a 90C again That Ninja is 1 fat bugger...damn troublesome to take it out everytime QUOTE(Cyclone87 @ Apr 15 2006, 02:43 PM) Overclocking result ..is the same. all the same..Except..Ultra got Sata2 but..around rm100 more expensive. So if u wan to use SATA2..den Ultra..if not..Normal ver. The LP series also has better cooling, lotsa extra memory tweaking options, better components and some other stuff The difference in OCing capabilities shouldnt be big, but i doubt it'll be the same This post has been edited by KilJim: Apr 15 2006, 03:10 PM
Card PM	Report Top Like Quote Reply

magiara	Apr 15 2006, 03:34 PM Show posts by this member only \| Post #166
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	wat's the different between infinity and lanparty? wanna try DFI tough
Card PM	Report Top Like Quote Reply

jsnkok	Apr 15 2006, 03:57 PM Show posts by this member only \| Post #167
Casual Junior Member 345 posts Joined: Apr 2005 From: Kajang	QUOTE(magiara @ Apr 15 2006, 03:34 PM) wat's the different between infinity and lanparty? wanna try DFI tough your question was answered in the previous post....
Card PM	Report Top Like Quote Reply

magiara	Apr 16 2006, 12:42 AM Show posts by this member only \| Post #168
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	so if i'm not looking for SLi which DFI will be a good choice?budget RM 500. with Ultra, can i use sata but not sata2?
Card PM	Report Top Like Quote Reply

remysix	Apr 16 2006, 01:42 AM Show posts by this member only \| Post #169
Hardcore Leecher!!! Senior Member 1,311 posts Joined: Jan 2003 From: Puchong/Deep Beach	QUOTE(magiara @ Apr 16 2006, 12:42 AM) so if i'm not looking for SLi which DFI will be a good choice?budget RM 500. with Ultra, can i use sata but not sata2? it's backward compatible...so no prob with u using the plain sata...i just love my nf4 ultra-d...damn gr8 feature for oc
Card PM	Report Top Like Quote Reply

magiara	Apr 16 2006, 03:02 AM Show posts by this member only \| Post #170
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(remysix @ Apr 16 2006, 01:42 AM) it's backward compatible...so no prob with u using the plain sata...i just love my nf4 ultra-d...damn gr8 feature for oc ic cool so no problem with using sata hdd with sata2 mobo? how much u bought ur mobo? i'm planning to get a lan party series soon should be same as urs kua.. same from the bulk by antonio_zth selling rm 600
Card PM	Report Top Like Quote Reply

KilJim	Apr 16 2006, 04:27 AM Show posts by this member only \| Post #171
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(magiara @ Apr 16 2006, 03:02 AM) ic cool so no problem with using sata hdd with sata2 mobo? how much u bought ur mobo? i'm planning to get a lan party series soon should be same as urs kua.. same from the bulk by antonio_zth selling rm 600 Yes SATA2 is backward compatible It'll work fine with SATA hdds
Card PM	Report Top Like Quote Reply

kulus	Apr 16 2006, 01:12 PM Show posts by this member only \| Post #172
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	QUOTE(magiara @ Apr 16 2006, 03:02 AM) ic cool so no problem with using sata hdd with sata2 mobo? how much u bought ur mobo? i'm planning to get a lan party series soon should be same as urs kua.. same from the bulk by antonio_zth selling rm 600 u say ur budget only RM 500..ultra D price is RM 600 stricly go for infinity board la
Card PM	Report Top Like Quote Reply

PowerHouse	Apr 20 2006, 01:37 PM Show posts by this member only \| Post #173
Getting Started Junior Member 237 posts Joined: Nov 2005 From: Kuching...	Dfi infinity ultra mobo is good.i'm using now.oc up tp 300 no prob.
Card PM	Report Top Like Quote Reply

magiara	Apr 21 2006, 11:56 AM Show posts by this member only \| Post #174
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(kulus @ Apr 16 2006, 01:12 PM) u say ur budget only RM 500..ultra D price is RM 600 stricly go for infinity board la i'm going for dfi lanparty ut sli-d
Card PM	Report Top Like Quote Reply

nakata101	Apr 25 2006, 07:03 AM Show posts by this member only \| Post #175
*****(PES&WE)***** Play Like Champion Senior Member 2,423 posts Joined: Jan 2003 From: Alor Star & Changlun	QUOTE(magiara @ Apr 21 2006, 11:56 AM) i'm going for dfi lanparty ut sli-d Bro... ur Jetway 939 GT4-SLi-G-OC sold already ar?? Hope u will got better oc score if get better mobo loh...
Card PM	Report Top Like Quote Reply

magiara	Apr 25 2006, 12:13 PM Show posts by this member only \| Post #176
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(nakata101 @ Apr 25 2006, 07:03 AM) Bro... ur Jetway 939 GT4-SLi-G-OC sold already ar?? Hope u will got better oc score if get better mobo loh... not haven't sell it
Card PM	Report Top Like Quote Reply

nakata101	Apr 25 2006, 05:26 PM Show posts by this member only \| Post #177
*****(PES&WE)***** Play Like Champion Senior Member 2,423 posts Joined: Jan 2003 From: Alor Star & Changlun	Ok, here is my Venice 3200+ OC result -AMD64 3200+ Venice (270x10=2700MHz, 1.500v, Stock fan) STEPPING : LBBWE 0607FPBW -2x256MB KVR (2.5-3-3-7, 2T, 2.6v)
Card PM	Report Top Like Quote Reply

kingmaker_20	Apr 26 2006, 12:55 AM Show posts by this member only \| Post #178
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(magiara @ Apr 21 2006, 11:56 AM) i'm going for dfi lanparty ut sli-d I'd say it's a good board from my experience.
Card PM	Report Top Like Quote Reply

nakata101	Apr 26 2006, 12:27 PM Show posts by this member only \| Post #179
*****(PES&WE)***** Play Like Champion Senior Member 2,423 posts Joined: Jan 2003 From: Alor Star & Changlun	QUOTE(nakata101 @ Apr 25 2006, 05:26 PM) Ok, here is my Venice 3200+ OC result -AMD64 3200 @ 2.7ghz + Venice (270x10=2700MHz, 1.500v, Stock fan) STEPPING : LBBWE 0607FPBW -2x256MB KVR (2.5-3-3-7, 2T, 2.6v) I m still cant c my name inside the ranking list.. is that i miss something ??
Card PM	Report Top Like Quote Reply

magiara	Apr 26 2006, 04:24 PM Show posts by this member only \| Post #180
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(kingmaker_20 @ Apr 26 2006, 12:55 AM) I'd say it's a good board from my experience. hope i can oc even higher after got it! QUOTE(nakata101 @ Apr 26 2006, 12:27 PM) I m still cant c my name inside the ranking list.. is that i miss something ?? chill dude, give soulfly some time to update it
Card PM	Report Top Like Quote Reply

TSsoulfly	Apr 26 2006, 05:51 PM Show posts by this member only \| Post #181
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	why not sabar one? i'm not a bot
Card PM	Report Top Like Quote Reply

nakata101	Apr 26 2006, 08:38 PM Show posts by this member only \| Post #182
*****(PES&WE)***** Play Like Champion Senior Member 2,423 posts Joined: Jan 2003 From: Alor Star & Changlun	QUOTE(soulfly @ Apr 26 2006, 05:51 PM) why not sabar one? i'm not a bot Sry... .... just worry is that i miss something out there...
Card PM	Report Top Like Quote Reply

amok	Apr 27 2006, 12:16 PM Show posts by this member only \| Post #183
schhhhwwiiiiiiinggggggg Elite 739 posts Joined: Jan 2003 From: Macau?	errr.. my latest result: CPU : AMD OPTERON 144 : CAB2E 0602GPAW BIOS Set Vcore : 1.45V BIOS Set Vdimm: 2.8 V Mobo: DFI NF4 DAGF/INFINITY Cooling : Watercooled (Swiftech MCW6002 + Nirox P2800 + Bulkhy Rad) RAM : 2 x 512M KVR3200 DT-D43 : 2.5-4-3-8 (1CL) Dual Channel The rest in my sig. Now playing around till can get a new PSU..
Card PM	Report Top Like Quote Reply

redbull_y2k	Apr 27 2006, 01:16 PM Show posts by this member only \| Post #184
"Viva La Revolucion!" Senior Member 1,469 posts Joined: Jan 2003 From: YOU.ESS.JAY	uish amok..... 366 HTT?!
Card PM	Report Top Like Quote Reply

kulus	Apr 27 2006, 04:28 PM Show posts by this member only \| Post #185
\|\|\|\|\|\|\|\|\|\|\| Senior Member 904 posts Joined: Jan 2003 From: Trg / Jay Bee	QUOTE(redbull_y2k @ Apr 27 2006, 01:16 PM) uish amok..... 366 HTT?! yeahh..now everyone open their eye.. not only ultra D can do good job for overclocking.. infinity board also can
Card PM	Report Top Like Quote Reply

Penjejak awan	Apr 28 2006, 04:20 PM Show posts by this member only \| Post #186
Getting Started Junior Member 206 posts Joined: Aug 2005 From: selangor	Amok large prime fft for ram ok tak??
Card PM	Report Top Like Quote Reply

amok	May 2 2006, 08:10 PM Show posts by this member only \| Post #187
schhhhwwiiiiiiinggggggg Elite 739 posts Joined: Jan 2003 From: Macau?	QUOTE(Penjejak awan @ Apr 28 2006, 04:20 PM) Amok large prime fft for ram ok tak?? yup so far no prob running small fft (cpu) and large fft(rams) for more that 12 hrs... no screenies though lazy nak mampus... my rams maxed out at 247MHz, it's oni a pair of KVR DT-D43 but.... running with dividers!!! (which is rare).
Card PM	Report Top Like Quote Reply

camedemac	May 3 2006, 12:03 AM Show posts by this member only \| Post #188
Newbie Senior Member 954 posts Joined: Aug 2005 From: Ampang Kg. Pandan Status: Idle	want to ask some question... when i do some prime using sp2004, nothing shows at the CPU speed..!! for example show 1800MHz FSB : 200 [200 x 9] could anyone tell me whats the problem?? i'm using AMD 3000+ venice E3 Winfast NF4K8AC RAM DT-D43 2562 thanx This post has been edited by camedemac*: May 3 2006, 12:04 AM
Card PM	Report Top Like Quote Reply

tAmp0i	May 3 2006, 10:35 AM Show posts by this member only \| Post #189
The name is Poi Senior Member 2,825 posts Joined: Jan 2003 From: Miri	QUOTE(tAmp0i @ Apr 13 2006, 06:57 PM) Joining the league... Opteron 146 [CAB2E 0540FPMW] @ 3.0GHz [300x10], 1.45v + 104% DFI LP UT nF4 Ultra-D 2x 256MB Kingston HyperX PC3200 @ 250MHz [2.0-2-5-2], 3.2v OCZ PowerStream 520Watt Fanless room, non-aircond Did i miss out anything?
Card PM	Report Top Like Quote Reply

TSsoulfly	May 3 2006, 12:09 PM Show posts by this member only \| Post #190
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	oops.... didn't see that one earlier
Card PM	Report Top Like Quote Reply

tAmp0i	May 3 2006, 12:37 PM Show posts by this member only \| Post #191
The name is Poi Senior Member 2,825 posts Joined: Jan 2003 From: Miri	QUOTE(soulfly @ May 3 2006, 12:09 PM) oops.... didn't see that one earlier Thanks soulie....
Card PM	Report Top Like Quote Reply

lichyetan	May 3 2006, 04:05 PM Show posts by this member only \| Post #192
***** Senior Member 2,295 posts Joined: Jan 2005 From: Penang	currently doing 2.55Ghz wif my venice at 1.44vcore... Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

lichyetan	May 4 2006, 01:13 AM Show posts by this member only \| Post #193
***** Senior Member 2,295 posts Joined: Jan 2005 From: Penang	passed prime for 12 hours for my 2.55ghz amd3000++ venice at 1.44 vcore sry double posting cause connection problem, do delete this section This post has been edited by lichyetan: May 4 2006, 01:20 AM
Card PM	Report Top Like Quote Reply

lichyetan	May 4 2006, 01:16 AM Show posts by this member only \| Post #194
***** Senior Member 2,295 posts Joined: Jan 2005 From: Penang	passed prime for 12 hours for my 2.55ghz amd3000++ venice at 1.44 vcore here is my settings: AMD Athlon64 3000++ E6 @ 2839 1.44 VCORE ASUS A8N-SLI 2x 512MB TeamXtreem DDR600 @ 283MHz [2.5-4-4-8], 2.8v Hypertransport x3 CoolerMaster 450W ACLX Real Power This post has been edited by lichyetan: May 4 2006, 01:21 AM Attached thumbnail(s)*
Card PM	Report Top Like Quote Reply

TSsoulfly	May 4 2006, 11:15 AM Show posts by this member only \| Post #195
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	any stepping bro? it's kinda boring without any stepping
Card PM	Report Top Like Quote Reply

lichyetan	May 4 2006, 11:00 PM Show posts by this member only \| Post #196
***** Senior Member 2,295 posts Joined: Jan 2005 From: Penang	QUOTE(soulfly @ May 4 2006, 11:15 AM) any stepping bro? it's kinda boring without any stepping will post it in next few days after reconfiguration my wc kit... stay tune, the prox actually not bad, could do 2.5Ghz without adding the vcore
Card PM	Report Top Like Quote Reply

mazdagtr210	May 6 2006, 05:02 PM Show posts by this member only \| Post #197
Casual Junior Member 320 posts Joined: Mar 2005	mazdagtr210 will come back with superb ocing after this . Retired a while coz bankrupt... hehhe
Card PM	Report Top Like Quote Reply

mazdagtr210	May 6 2006, 05:03 PM Show posts by this member only \| Post #198
Casual Junior Member 320 posts Joined: Mar 2005	QUOTE(lichyetan @ May 4 2006, 01:16 AM) passed prime for 12 hours for my 2.55ghz amd3000++ venice at 1.44 vcore here is my settings: AMD Athlon64 3000++ E6 @ 283*9 1.44 VCORE ASUS A8N-SLI 2x 512MB TeamXtreem DDR600 @ 283MHz [2.5-4-4-8], 2.8v Hypertransport x3 CoolerMaster 450W ACLX Real Power with that setup u can go higher... try push more....
Card PM	Report Top Like Quote Reply

charge-n-go	May 10 2006, 03:13 PM Show posts by this member only \| Post #199
Look at all my stars!! Senior Member 4,060 posts Joined: Jan 2003 From: Penang / PJ	Soulfly, For Your Convenience CACJE 0607 APAW \| charge-n-go \| 2700MHz \| AUTO \| Opteron 144 E4 \| AIR / fanless? Main Specification ~~~~~~~~~~~~ AMD Opteron 144 (CACJE 0607 APAW) 512MB x 2 Corsair XMS3200 XLPT rev 1.2 DFI LanParty UT nF4 Ultra-D Enermax Liberty 400W PSU Cooling Method ~~~~~~~~~~ Scythe Ninja (Fanless) Evercool VC-RF Chipset fan @ 3000rpm (max 5000) 2x 120mm 1,200rpm casing fan. 1x PWM 80mm 1500rpm (placed under CD drive and blow towards Ninja as well) BIOS Set Values: ~~~~~~~~~~~ AMD Opteron 144 @ 9 x 300 = 2700MHz Vcore = AUTO Vdimm = 2.70V VLdt = AUTO Vchip = AUTO LDT multiplier = 3x RAM divider = /12 Screenshot: ~~~~~~~~ This post has been edited by charge-n-go: May 10 2006, 03:19 PM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

charge-n-go	May 11 2006, 02:28 PM Show posts by this member only \| Post #200
Look at all my stars!! Senior Member 4,060 posts Joined: Jan 2003 From: Penang / PJ	New overclocking ! CACJE 0607 APAW \| charge-n-go \| 2808MHz \| 1.456V \| Opteron 144 E4 \| AIR(fanless) BIOS Set Values: ~~~~~~~~~~~ AMD Opteron 144 @ 9 x 312 = 2808MHz Vcore = AUTO104% = 1.456V Vdimm = 2.73V VLdt = AUTO Vchip = AUTO LDT multiplier = 3x RAM divider = /12 Screenshot: ~~~~~~~~ This post has been edited by charge-n-go: May 11 2006, 02:29 PM Attached thumbnail(s)*
Card PM	Report Top Like Quote Reply

pcmoddingmy	May 13 2006, 07:07 PM Show posts by this member only \| Post #201
Casual Junior Member 498 posts Joined: Jan 2003 From: Ipoh, Perak	Opteron 144 CAB2E 0610 GPAW \| pcmoddingmy \| 2808MHz \| 1.488V \| Opteron 144 E4 \| Water cooled (passive rad) Main Specification -------------------- AMD Opteron 144 (CAB2E 0610 GPAW) S939 2 x 1Gb Corsair XMS3500LLPRO 2.5-3-3-7-1T DFI LP UT RDX200 CF-DR SilverStone ST60F 600W Modular PSU CPU Cooling Method ------------------ Aquabox UV Water Cooling Big ass external passive radiator Arctic Silver 5 BIOS Set Values: -------------------- Socket 939 AMD Opteron 144 @ 9 x 312 = 2808MHz Vcore = 1.500V Vdimm = 2.65V SB PCIE V = 1.9 NB Analog V = 1.4 LDT Bus V = 1.4 NB Core V = 1.4 LDT multiplier = 3x RAM divider = /12 Screenshot: -------------- *Click for full image P/S: The Opteron 144 was purchased via kingmaker @ LYN Some managed to Prime at 2.8GHz at stock Vcore but mine wanted 1.488V...
Card PM	Report Top Like Quote Reply

KilJim	May 14 2006, 02:51 AM Show posts by this member only \| Post #202
^-_-^ ZzzZzZzZzzz.... Elite 4,424 posts Joined: Jan 2003 From: Singapore	QUOTE(KilJim @ Apr 11 2006, 10:37 PM) Here's mine : Opteron 144 CAB2E 0602GPAW DFI LanParty NF4 Ultra-D 1 x 1024mb Infineon DDR333 BE-6 XP-90C, mid level fan, no air-cond soul, dont forget mine Post #152 This post has been edited by KilJim: May 14 2006, 02:53 AM
Card PM	Report Top Like Quote Reply

TSsoulfly	May 14 2006, 11:56 AM Show posts by this member only \| Post #203
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	bios set vcore?
Card PM	Report Top Like Quote Reply

gsan	May 27 2006, 10:44 AM Show posts by this member only \| Post #204
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	280x10 @ 1.3v + 109.6% AMD Opteron 146 CACJE 0607 APBW DFI UT LP NF4 SLI-DR Expert Mushkin 512MB PC3200 Special Edition 64MB Leadtek Winfast 6200TurboCache 64bit Fortron Epsilon 600W Thermalright xp90c with 92mm @ 2.2k rpm This post has been edited by gsan: May 27 2006, 10:55 AM
Card PM	Report Top Like Quote Reply

TSsoulfly	May 27 2006, 10:51 AM Show posts by this member only \| Post #205
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	i need bios set Vcore please.... not vcore reading
Card PM	Report Top Like Quote Reply

gengstapo	May 27 2006, 11:07 AM Show posts by this member only \| Post #206
Retired enthusiast All Stars 10,688 posts Joined: Jan 2005	QUOTE(gsan @ May 27 2006, 10:44 AM) 280x10 @ 1.3v + 109.6% AMD Opteron 146 CACJE 0607 APBW DFI UT LP NF4 SLI-DR Expert Mushkin 512MB PC3200 Special Edition 64MB Leadtek Winfast 6200TurboCache 64bit Fortron Epsilon 600W Thermalright xp90c with 92mm @ 2.2k rpm [.imageshack.us] wow.. u get ur 146 ady arr? look like the stepping was magic oso
Card PM	Report Top Like Quote Reply

Westley	May 27 2006, 11:35 AM Show posts by this member only \| Post #207
Night Crawler... Store Representative 679 posts Joined: Jan 2003 From: PG/KL/CYBERJAYA	cpu 0516FPAW A64 3200+ XP90C + Vantec 92MM tornado 1.475v @ bios This post has been edited by Westley: May 27 2006, 11:36 AM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

magiara	May 27 2006, 02:15 PM Show posts by this member only \| Post #208
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	QUOTE(magiara @ May 27 2006, 01:52 PM) Finally, here is mine! 43C \| Magiara \| AMD Athlon64 3000+ \| 2608Mhz \| 1.632V \| Thermaltake Big Typhoon \| Delta Tri-Blade 120mmx32mm \| DFI LanParty UT nF4 SLi-D \| IDLE soulfly, here is my latest score, please do update! This post has been edited by magiara: May 27 2006, 02:16 PM
Card PM	Report Top Like Quote Reply

kanethesun	May 27 2006, 08:18 PM Show posts by this member only \| Post #209
Regular Senior Member 1,426 posts Joined: Jan 2005 From: Jln Sg Besi, Taiping	LBBWE 0543 BPEW \| kanethesun \| 3000+ \| Venice E6 \| S939 Bios set Vcore 1.575 This post has been edited by kanethesun: May 27 2006, 08:19 PM
Card PM	Report Top Like Quote Reply

Par@dox	Jun 5 2006, 11:18 PM Show posts by this member only \| Post #210
Gantzer Senior Member 1,222 posts Joined: Jan 2003 From: Ampang Jaya	Here's mine. Setup :- Opteron 144 CAB1E 0614 BPBW @ 1.45vcore (bios) Cooled with Swiftech Storm G4 with MCP-650 pump / Black Ice Extreme DFI NF4 LP Ultra-D 1gb (512mb x 2) Kingston HyperX PC3500 Enermax Liberty 620w Will try for 3.2ghz later.
Card PM	Report Top Like Quote Reply

magiara	Jun 5 2006, 11:27 PM Show posts by this member only \| Post #211
Legend Senior Member 1,599 posts Joined: Nov 2004 From: Puchong	very good stepping u have right there, 3.2ghz
Card PM	Report Top Like Quote Reply

jsnkok	Jun 17 2006, 08:28 AM Show posts by this member only \| Post #212
Casual Junior Member 345 posts Joined: Apr 2005 From: Kajang	A64 3000+ LBBWE 0614BPMW @ BIOS Vcore 1.475v CoolerMaster Susurro Biostar TForce 4 U 2512MB KVR @ 216.8Mhz 2.5-4-4-8 CasePower 300W OEM PSU Idle Temp 37C This post has been edited by jsnkok*: Jun 17 2006, 08:28 AM
Card PM	Report Top Like Quote Reply

kingmaker_20	Jun 19 2006, 07:39 PM Show posts by this member only \| Post #213
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	Trying my luck for 3.0Ghz on stock vcore. CAB1E 0614 BPMW Idle temp - 37-38C Full load - 43C-46C Bios set Vcore = 1.37V Vdimm = 2.9V LDT = 3X HTT - 330x9 Mobo - DFI LP UT NF4 SLI-D Rev AA Ram - Twinmos SP PC3500 512MB HSF - metalzone's Budget WC kit
Card PM	Report Top Like Quote Reply

amok	Jun 22 2006, 08:53 AM Show posts by this member only \| Post #214
schhhhwwiiiiiiinggggggg Elite 739 posts Joined: Jan 2003 From: Macau?	congrats y'all.... I've sold mine to someone who is desperate for a working rig and got my self a new one from dinster. And it's WICKED.... same stepping as kingmaker20 though. CAB1E 0614BPMW \| amok \| 3025MHz \|1.4V(default)\| Opteron144(E4)\| S939 \| Watercooled. BIOS Set Values: ~~~~~~~~~~~ AMD Opteron 144 @ 9 x 336 = 3024MHz Vcore = Default = 1.4V Vdimm = 2.6V LDT multiplier = 3x Screenshot: ~~~~~~~~ Rig Spec: ~~~~~~~~ As in my sig.. dA Rig Can delete the old one cause the proc no longer with me.
Card PM	Report Top Like Quote Reply

satanhead2003	Jun 22 2006, 02:28 PM Show posts by this member only \| Post #215
On my way Senior Member 551 posts Joined: Dec 2005	Wahh... Full Load 27c ...... nice wc there
Card PM	Report Top Like Quote Reply

kingmaker_20	Jun 23 2006, 03:37 AM Show posts by this member only \| Post #216
" t3H 1337(tm)" Senior Member 3,159 posts Joined: Dec 2004 From: >Taiping,Perak<	QUOTE(satanhead2003 @ Jun 22 2006, 02:28 PM) Wahh... Full Load 27c ...... nice wc there amok- sifu cooling wor.. soulfly@ CAB1E 0614 BPMW \| kingmaker_20 \| 1.370V \| Opteron 144 E4 \| WATER Forgot to include my processors clocked speed? This post has been edited by kingmaker_20: Jun 23 2006, 03:39 AM
Card PM	Report Top Like Quote Reply

OverCool	Jun 29 2006, 02:14 AM Show posts by this member only \| Post #217
New Member Junior Member 38 posts Joined: Apr 2006 From: Bump Bump	Just want to share my OC result:- Opteron 146 CAB1E 0614 BPBW @ 1.40 * 113% Vcore (Bios) Cooled with Scythe Ninja with 2 High speed fan DFI Lanparty Ultra-D (Bios 704-2BTA) 1GB Corsair XMS4400C2PT Acbel 450Watt PSU Lucky can stay for 8 Hours test .. This post has been edited by OverCool: Jun 29 2006, 02:20 AM
Card PM	Report Top Like Quote Reply

dark_tern	Jul 2 2006, 03:32 PM Show posts by this member only \| Post #218
New Member Junior Member 10 posts Joined: Jun 2006 From: Gombak	May i know about function of Prime95 and how to run it?
Card PM	Report Top Like Quote Reply

TSsoulfly	Jul 2 2006, 09:11 PM Show posts by this member only \| Post #219
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	it's for stressing the processor for stability checking some links for you: http://en.wikipedia.org/wiki/Prime95 http://www.mersenne.org/prime.htm
Card PM	Report Top Like Quote Reply

OverCool	Jul 3 2006, 12:42 AM Show posts by this member only \| Post #220
New Member Junior Member 38 posts Joined: Apr 2006 From: Bump Bump	Yeah..!!! I No 1 now...!!!!!!!1
Card PM	Report Top Like Quote Reply

pcmoddingmy	Jul 4 2006, 09:43 PM Show posts by this member only \| Post #221
Casual Junior Member 498 posts Joined: Jan 2003 From: Ipoh, Perak	Guys, Anyone with AM2 overclocking yet? Well, let me be the first then..... LBBVF 0619 SPBW \| pcmoddingmy \| 3010MHz \| 1.616V \| 3000+ Orleans F2 \| Water Setup: 3000+ Orleans F2 0619SPBW Biostar TForce 590 SLI Deluxe 2x512MB PC2-4200 DDR2 Corsair Nautilus500 w/c FSP Epsilon 700W GeForce 7300GT DDR3 SLI This post has been edited by pcmoddingmy: Jul 4 2006, 11:22 PM
Card PM	Report Top Like Quote Reply

TSsoulfly	Jul 4 2006, 10:01 PM Show posts by this member only \| Post #222
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	if i got my graphics card, i would be joining you already.... since i had everything except for my 7300gt yet
Card PM	Report Top Like Quote Reply

pcmoddingmy	Jul 4 2006, 11:23 PM Show posts by this member only \| Post #223
Casual Junior Member 498 posts Joined: Jan 2003 From: Ipoh, Perak	QUOTE(soulfly @ Jul 4 2006, 10:01 PM) if i got my graphics card, i would be joining you already.... since i had everything except for my 7300gt yet Cool... we shall wait for your results then. Which mobo & ddr2 you have prepared for your AM2 setup?
Card PM	Report Top Like Quote Reply

TSsoulfly	Jul 4 2006, 11:30 PM Show posts by this member only \| Post #224
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	Biostar Tforce550 with Corsair Value ... for now... besides 7300GT, i'm also waiting for DoubleClick's bulk for TeamXtreem DDR2-667 with Micron goodness.
Card PM	Report Top Like Quote Reply

pcmoddingmy	Jul 5 2006, 12:38 AM Show posts by this member only \| Post #225
Casual Junior Member 498 posts Joined: Jan 2003 From: Ipoh, Perak	QUOTE(soulfly @ Jul 4 2006, 11:30 PM) Biostar Tforce550 with Corsair Value ... for now... besides 7300GT, i'm also waiting for DoubleClick's bulk for TeamXtreem DDR2-667 with Micron goodness. Welcome to Biostar club! But if you're gonna get some fatbody Microns (D9), I guess you need more than 2.3V. If I recall properly, your TForce 550 should come with a 2.3V jumper... But the problem is, even if you had enable the jumper... the VDIMM will not go beyond 2.2V. Well, atleast this is the problem I'm facing with my TForce 590 SLI Deluxe. I have two pair of fatbody Microns and they can only do up to DDR800 at CL4. I might have booted at DDR880 before but I don't remember them being stable with just 2.2V. Once I'm done with the it, I might give it a Vmod to get about 2.5-2.7V...
Card PM	Report Top Like Quote Reply

TSsoulfly	Jul 5 2006, 12:17 PM Show posts by this member only \| Post #226
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	the newer D9s non-fatbody will just fine with lower voltage... but not as tight as the fatbodies This post has been edited by soulfly: Jul 5 2006, 12:17 PM
Card PM	Report Top Like Quote Reply

amok	Jul 7 2006, 05:17 PM Show posts by this member only \| Post #227
schhhhwwiiiiiiinggggggg Elite 739 posts Joined: Jan 2003 From: Macau?	Totally WICKED.... here's the current clock under default Vcore. CAB1E 0614BPMW \| amok \| 3109MHz \|1.4V(default)\| Opteron144(E4)\| S939 \| Watercooled. BIOS Set Values: ~~~~~~~~~~~ AMD Opteron 144 @ 9 x 345 = 3109MHz Vcore = Default = 1.4V Vdimm = 2.6V LDT multiplier = 3x Screenshot: ~~~~~~~~ wait and see how high can this proc hit at default Vcore.
Card PM	Report Top Like Quote Reply

lolhalol	Jul 11 2006, 03:40 PM Show posts by this member only \| Post #228
Showroom Skateboarding Senior Member 1,823 posts Joined: Mar 2006 From: Kuala Lumpur	accidentaly posted twice This post has been edited by lolhalol: Jul 11 2006, 04:44 PM
Card PM	Report Top Like Quote Reply

lolhalol	Jul 11 2006, 04:31 PM Show posts by this member only \| Post #229
Showroom Skateboarding Senior Member 1,823 posts Joined: Mar 2006 From: Kuala Lumpur	hey guys this is my oc ...umm i duuno if u guys accept my entry as it stops at around 9 hours...the requirement is 8 hours so i hope u guys can consider this entry...thx... p.s. i suspect this proc can go higher judgojg by the temps i got a t ful load (42~48) some more thats is in the after noon like 1:25...so i will try t go higher when my wc coling kit arrives....hehe see if i can reach 3.ghz mark on a amd 64 chip... stepping: ADA3000DAA4BW NBBWE 0618FAB X100347E60173 Cooling method: Air with a tt beetle(proc) Air with hr-05 (chipset) Vcore: 1.68 mobo: dfi ut lp expert ram: HyperX PC 3200AK2 (2-3-3-6-1T) (KHX 3200AK2) Winbond CH-5 gpu: winfast px 7800 gt extreme psu: fortron epsilon series 600wt hdd: wd 80gb This post has been edited by lolhalol: Jul 11 2006, 04:55 PM
Card PM	Report Top Like Quote Reply

gsan	Jul 16 2006, 11:38 AM Show posts by this member only \| Post #230
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	@Overcool where are you got the gem 146 ?
Card PM	Report Top Like Quote Reply

OverCool	Jul 16 2006, 02:07 PM Show posts by this member only \| Post #231
New Member Junior Member 38 posts Joined: Apr 2006 From: Bump Bump	QUOTE(gsan @ Jul 16 2006, 11:38 AM) @Overcool where are you got the gem 146 ? I ask friend help me buy at US... Not cheapt oh... More exp then malaysia.. It was around RM900++ include postage from US to malaysia.. Default Vcore can hit 300 * 10.. Not bad...!!!
Card PM	Report Top Like Quote Reply

Par@dox	Jul 16 2006, 02:23 PM Show posts by this member only \| Post #232
Gantzer Senior Member 1,222 posts Joined: Jan 2003 From: Ampang Jaya	3.2ghz Opteron 144 CAB1E 0614 BPBW @ 1.45110% vcore (bios) Cooled with Swiftech Storm G4 with MCP-650 pump / Black Ice Extreme DFI NF4 LP Ultra-D 1gb (512mb x 2) Kingston HyperX PC3500 Enermax Liberty 620w This post has been edited by Par@dox*: Jul 16 2006, 02:23 PM
Card PM	Report Top Like Quote Reply

OverCool	Jul 16 2006, 02:32 PM Show posts by this member only \| Post #233
New Member Junior Member 38 posts Joined: Apr 2006 From: Bump Bump	QUOTE(Par@dox @ Jul 16 2006, 02:23 PM) 3.2ghz Opteron 144 CAB1E 0614 BPBW @ 1.45*110% vcore (bios) Cooled with Swiftech Storm G4 with MCP-650 pump / Black Ice Extreme DFI NF4 LP Ultra-D 1gb (512mb x 2) Kingston HyperX PC3500 Enermax Liberty 620w Wah..!!! U damn good..!!! I waiting for my new PSU and will try to hit 3.3 later...
Card PM	Report Top Like Quote Reply

nakata101	Jul 21 2006, 02:13 PM Show posts by this member only \| Post #234
*****(PES&WE)***** Play Like Champion Senior Member 2,423 posts Joined: Jan 2003 From: Alor Star & Changlun	QUOTE(pcmoddingmy @ Jul 4 2006, 09:43 PM) Guys, Anyone with AM2 overclocking yet? Well, let me be the first then..... LBBVF 0619 SPBW \| pcmoddingmy \| 3010MHz \| 1.616V \| 3000+ Orleans F2 \| Water Setup: 3000+ Orleans F2 0619SPBW Biostar TForce 590 SLI Deluxe 2x512MB PC2-4200 DDR2 Corsair Nautilus500 w/c FSP Epsilon 700W GeForce 7300GT DDR3 SLI Nice... how much for Biostar TForce 590 SLI Deluxe.... thinking to switch my 939 to AM2....
Card PM	Report Top Like Quote Reply

pcmoddingmy	Jul 21 2006, 03:11 PM Show posts by this member only \| Post #235
Casual Junior Member 498 posts Joined: Jan 2003 From: Ipoh, Perak	QUOTE(nakata101 @ Jul 21 2006, 02:13 PM) Nice... how much for Biostar TForce 590 SLI Deluxe.... thinking to switch my 939 to AM2.... I think the MSRP should be around RM700-800, but this board is not available for sale yet.
Card PM	Report Top Like Quote Reply

gsan	Jul 23 2006, 06:02 PM Show posts by this member only \| Post #236
Electrical RF Engineer Senior Member 2,471 posts Joined: Jan 2003	QUOTE(OverCool @ Jul 16 2006, 02:07 PM) I ask friend help me buy at US... Not cheapt oh... More exp then malaysia.. It was around RM900++ include postage from US to malaysia.. Default Vcore can hit 300 * 10.. Not bad...!!!� prime stable? This post has been edited by gsan: Jul 23 2006, 06:03 PM
Card PM	Report Top Like Quote Reply

allenultra	Aug 14 2006, 09:41 PM Show posts by this member only \| Post #237
Look at all my stars!! Senior Member 9,027 posts Joined: Jan 2003 From: Ipoh	Anyone here OC with the Biostar 6100 AM2 board? Interested to get one. Or any 6100 overclocker here?
Card PM	Report Top Like Quote Reply

TSsoulfly	Aug 15 2006, 01:12 AM Show posts by this member only \| Post #238
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(allenultra @ Aug 14 2006, 09:41 PM) Anyone here OC with the Biostar 6100 AM2 board? Interested to get one. Or any 6100 overclocker here? i'm not pretty sure about the normal 6100-AM2, but the Tforce version overclocks okay.... it's just that the BIOS option is not as extensive as Tforce500-series.
Card PM	Report Top Like Quote Reply

afosz	Aug 20 2006, 09:08 AM Show posts by this member only \| Post #239
Justice, My Foot! Senior Member 1,413 posts Joined: Jun 2006 From: Shah Alam	QUOTE(pcmoddingmy @ Jul 4 2006, 09:43 PM) Guys, Anyone with AM2 overclocking yet? Well, let me be the first then..... LBBVF 0619 SPBW \| pcmoddingmy \| 3010MHz \| 1.616V \| 3000+ Orleans F2 \| Water Setup: 3000+ Orleans F2 0619SPBW Biostar TForce 590 SLI Deluxe 2x512MB PC2-4200 DDR2 Corsair Nautilus500 w/c FSP Epsilon 700W GeForce 7300GT DDR3 SLI cool 3.0 GHz with 1.6 V..kinda new to this overclock..need some more knowledge i'm using the same processor as yours but the motherboard is Gigabyte S2 and Kingston 667 1GB..how to overclock to the most optimal speed?yesterday i tried to go for 2.7 GHz but crash..takut suda and then just make it to 2.0 only
Card PM	Report Top Like Quote Reply

mzms	Sep 10 2006, 06:42 AM Show posts by this member only \| Post #240
Getting Started Junior Member 220 posts Joined: Sep 2006	QUOTE(allenultra @ Aug 14 2006, 09:41 PM) Anyone here OC with the Biostar 6100 AM2 board? Interested to get one. Or any 6100 overclocker here? I have two of this board. One is running sempron 1.6Ghz. The other is running A64 2Ghz. I was only able to clock the sempron to 1.9 but I didn't play around with the memory settings too much. But with the A64 I have a lot of success with this budget board. I got it to 2.6Ghz and I have not tried more but 2.6 needs a small voltage bump from 1.35 to 1.4 or 1.45. The board allows you to increase up to 0.15+ voltage only but for a budget cheap board, it's great to have that option. There's also lots of memory settings in bios. Also have a brand new gigabyte AM2 S2 6100 and that one has no overclocking in bios whatsoever except a bit of ram timing settings. Overall, I am very much satisfied with this board. One thing though, it does not have a parallel port so I had to use some old ports from the older computers and plug them into the board header. Works great. As I am typing this I am running prime95 and running my cpu at 2.45Ghz with no voltage increase and using stock cooling. Core Temp shows a load of 43-45C and an idle temp of abour 35-36C. It appears to like 2.45Ghz for my 3200+ best. I'm using 667 ram.
Card PM	Report Top Like Quote Reply

TSsoulfly	Oct 17 2006, 11:42 PM Show posts by this member only \| Post #241
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	======================================== Short description: cpu: 299x9 @ 2697MHz, 1.500V ram: DDR2-898, CL4-4-4-13-2T @ 2.1V ======================================== AMD Athlon 64 3000+ Rev.F2 (LBBVF 0620 SPAW) DFI Infinity nF UltraII-M2/SLiII-M2 (08/9 BIOS) 2x512MB TeamXtreem DDR2-667 CL3 (Micron D9GMH) Galaxy 7300GT 128MB DDR3 160GB Seagate SATA2 HDD NEC ND-3540A DVD Writer Enermax FMA 460W ATX1.3 Stock AMD cooler
Card PM	Report Top Like Quote Reply

tictac	Oct 19 2006, 01:44 PM Show posts by this member only \| Post #242
Member Elite 2,520 posts Joined: Jan 2003 From: Sibu	======================================== Short description: cpu: 300x9 @ 2700MHz, 1.350V ram: DDR2-600, CL4-4-4-12-17-1T @ 2.16V ======================================== AMD Athlon 64 3000+ Rev.F2 (unknown) ABIT Socket AM2 board (Beta 04 BIOS) 2x256MB TwinMOS DDR2-533 CL4 (Nanya) (el-cheapo stuff ) ATI X300 256MB HM (el-cheapo stuff ) 40GB Seagate PATA HDD Sony Combo Drive Simbadda 500watt (el-cheapo stuff ) Cooler : TT Big Thypoon This post has been edited by tictac: Oct 19 2006, 01:47 PM
Card PM	Report Top Like Quote Reply

zero_clockz	Nov 30 2006, 03:45 PM Show posts by this member only \| Post #243
New Member Junior Member 22 posts Joined: Mar 2006 From: shah alam seven	here's the first time my screenshot post and my first time oc of my new am2 system using nf-mcp55 t-force biostar series... will oc more after this..... will try the lowest cpu volt.. stepping: LEBAF 0636 MPMW with stock hsf This post has been edited by zero_clockz: Dec 2 2006, 06:35 PM
Card PM	Report Top Like Quote Reply

Enigmatic	Nov 30 2006, 04:02 PM Show posts by this member only \| Post #244
Tralala? Senior Member 3,291 posts Joined: Jan 2005 From: Nowhere Everywhere	Eh excuse me tictac.. but does Big Typhoon fits on AM2? The older one doesn't right? @zero_clockz Dude.. you seriously throwing that thing at 1.8v? This post has been edited by Enigmatic: Nov 30 2006, 04:04 PM
Card PM	Report Top Like Quote Reply

TSsoulfly	Nov 30 2006, 04:07 PM Show posts by this member only \| Post #245
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	QUOTE(zero_clockz @ Nov 30 2006, 03:45 PM) here's the first time my screenshot post and my first time oc of my new am2 system using nf-mcp55 t-force biostar series... will oc more after this..... will try the lowest cpu volt.. stepping: LEBAF 0636 WMPM with stock hsf bro.... use the latest version of CPU-Z and your voltage is kinda high of course
Card PM	Report Top Like Quote Reply

phreak_id	Nov 30 2006, 05:27 PM Show posts by this member only \| Post #246
Casual Senior Member 365 posts Joined: Jan 2003 From: Bandar Sri Permaisuri, Cheras, KL	QUOTE(soulfly @ Nov 30 2006, 04:07 PM) bro.... use the latest version of CPU-Z and your voltage is kinda high of course any other requirement beside the uses of newest cpu-Z?? by the way, i told him already regarding the Vcore.. i dont know wether he is smiling or crying now coz that proc died already last night ..
Card PM	Report Top Like Quote Reply

zero_clockz	Dec 2 2006, 06:38 PM Show posts by this member only \| Post #247
New Member Junior Member 22 posts Joined: Mar 2006 From: shah alam seven	my new proc just arive.... will post oc result later...but mod, could you put my oc result on ranking? ..should be on 2nd in ranking... coz i just download the latest cpu-z. This post has been edited by zero_clockz: Dec 2 2006, 06:40 PM
Card PM	Report Top Like Quote Reply

allenultra	Dec 2 2006, 06:47 PM Show posts by this member only \| Post #248
Look at all my stars!! Senior Member 9,027 posts Joined: Jan 2003 From: Ipoh	QUOTE(zero_clockz @ Dec 2 2006, 06:38 PM) my new proc just arive.... will post oc result later...but mod, could you put my oc result on ranking? ..should be on 2nd in ranking... coz i just download the latest cpu-z. u need to pass a pi-32m test or something like at least 8 hours SP2004 stress testing.
Card PM	Report Top Like Quote Reply

TSsoulfly	Dec 2 2006, 09:11 PM Show posts by this member only \| Post #249
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	Instructions on the first page.
Card PM	Report Top Like Quote Reply

zero_clockz	Dec 13 2006, 10:04 AM Show posts by this member only \| Post #250
New Member Junior Member 22 posts Joined: Mar 2006 From: shah alam seven	QUOTE(zero_clockz @ Dec 2 2006, 06:38 PM) my new proc just arive.... will post oc result later...but mod, could you put my oc result on ranking? ..should be on 2nd in ranking... coz i just download the latest cpu-z. so bad... my new proc doesnt have oc flexibility like my proc be4.. my new proc (LEBAF 0637 GPBW) cant pass 288 x 9 at all.... maybe looking for x2 after this...
Card PM	Report Top Like Quote Reply

speedrider	Mar 1 2007, 04:54 PM Show posts by this member only \| Post #251
Casual Junior Member 403 posts Joined: Jul 2005 From: in front of your house.... peeping	Dont know whether pass or not... CPU: Winchester 3200+ @ 2.342GHz, 2609, 1.50V Mobo: ABIT Fatality AN8 SLi Ram: KVR Hynix DT-D43 512x2 using divider 333mhz, 2.5-3-3-6 Water cooled using TT Big Water, battery water CPUz Dump file This post has been edited by speedrider: Mar 1 2007, 05:08 PM Attached thumbnail(s)*
Card PM	Report Top Like Quote Reply

TSsoulfly	Mar 1 2007, 05:18 PM Show posts by this member only \| Post #252
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	why 'alang-alang'? just another few more minutes to 8hrs. and btw use 10x is better. This post has been edited by soulfly: Mar 1 2007, 05:19 PM
Card PM	Report Top Like Quote Reply

speedrider	Mar 1 2007, 05:29 PM Show posts by this member only \| Post #253
Casual Junior Member 403 posts Joined: Jul 2005 From: in front of your house.... peeping	QUOTE(soulfly @ Mar 1 2007, 05:18 PM) why 'alang-alang'? just another few more minutes to 8hrs. and btw use 10x is better. Winchester on-die mem controller not so good. I cant get x10 multiplier with 260 FSB using KVR. On the other side, most of OCer prefer to use Venice, so its looks Im alone using winchester, and lack of Gurus as a advisor to fine tune it. On the day I've captured the screenie, Im rushing to go to workplace, and its a risk to put my PC on 24/7 due to my house power supply not efficient to support refrigerator, washing machine blablabla.... NVM, its not a priority for me to get into the ranking, maybe as a contributor for what Winchester can achieve is a satisfactory for me. At least, I hope there will be a Winnie 3200+ user will show up what they have done with the most unpopular CPU Added on June 24, 2007, 4:38 pm QUOTE(speedrider @ Mar 1 2007, 04:54 PM) Dont know whether pass or not... CPU: Winchester 3200+ @ 2.342GHz, 2609, 1.50V Mobo: ABIT Fatality AN8 SLi Ram: KVR Hynix DT-D43 512x2 using divider 333mhz, 2.5-3-3-6 Water cooled using TT Big Water, battery water CPUz Dump file UPDATED: PASS 12 HOURS STRESS* CPU: Winchester 3200+ @ 2.343GHz, 2609, 1.60V Mobo: ABIT Fatality AN8 SLi Ram: KVR Hynix DT-D43 512x2 using divider 333mhz, 3-4-4-8 Water cooled using TT Big Water, battery water This post has been edited by speedrider: Jun 24 2007, 04:42 PM Attached thumbnail(s)*
Card PM	Report Top Like Quote Reply

tachlio	Aug 23 2007, 12:02 AM Show posts by this member only \| Post #254
de~sign "ing" Senior Member 3,102 posts Joined: May 2005 From: Penang ̡͌l̡̡̡	lolz why 1st page pic all is like that d??
Card PM	Report Top Like Quote Reply

TSsoulfly	Aug 23 2007, 10:28 AM Show posts by this member only \| Post #255
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	lol.... i guess the image hosting taken over by porn image gallery already!
Card PM	Report Top Like Quote Reply

slash	Aug 25 2007, 02:01 PM Show posts by this member only \| Post #256
Warcraft 3 Champion - Lan Party 2003 Senior Member 1,081 posts Joined: Jan 2003	haha. but pretty interesting to read the postings, then see the pics. "here's wat i get with 1:1 HTT ratio" then the pic of a girl with quite evenly sized boobs. LOL
Card PM	Report Top Like Quote Reply

gtoforce	Aug 28 2007, 02:01 AM Show posts by this member only \| Post #257
SPAM AND BECOME A SENIOR MEMBER Senior Member 2,967 posts Joined: May 2006	hey noob here air means just the hsf right? Added on August 28, 2007, 2:02 amanyways, last time i oc'd my winchest on the orignal HSF only managed to go from 1.8 to 2.1 dunno why did it on my previous k8n-neo2 platinum This post has been edited by gtoforce: Aug 28 2007, 02:02 AM
Card PM	Report Top Like Quote Reply

xtorm	Oct 14 2007, 12:44 AM Show posts by this member only \| Post #258
^O....OO.....ooo^ Senior Member 3,160 posts Joined: Jan 2003 From: KLANG!	curently looking for a proc, hmm seems like athlon venice E3 is better then E6 rite? i got 2 choice now, will b pairing it with jetway 939gt4
Card PM	Report Top Like Quote Reply

mars	Oct 30 2007, 06:45 PM Show posts by this member only \| Post #259
Getting Started Junior Member 294 posts Joined: Jan 2005 From: Cat CiteYy	Hoho... i'm still stuck with skt 939......... still surviving for now..... I think Athlon 64 not a bad proc though ... could last several years........
Card PM	Report Top Like Quote Reply

nadeng1987	Nov 4 2007, 06:33 AM Show posts by this member only \| Post #260
Casual Junior Member 433 posts Joined: Aug 2007	QUOTE(mars @ Oct 30 2007, 06:45 PM) Hoho... i'm still stuck with skt 939......... still surviving for now..... I think Athlon 64 not a bad proc though ... could last several years........ hehe. agree with ya. my 939 rig stil running rite now after more than 2 years. give it to my brother to play. haha.
Card PM	Report Top Like Quote Reply

speedrider	Jan 6 2008, 05:03 PM Show posts by this member only \| Post #261
Casual Junior Member 403 posts Joined: Jul 2005 From: in front of your house.... peeping	I'm stressing it more... CPU: AMD 3200+ @ 2.34GHz, 260MHz FSB * 9.0 multiplier (Winchester) RAM: 2* 512MB KVR chipset HYNIX DT-D43 3-4-4-8 divider 333MHz @ DDR426 Mobo: Abit fatal1ty AN8 SLi But this time, I'm using stock HSF. Air cooling... This post has been edited by speedrider: Jan 6 2008, 05:13 PM Attached thumbnail(s)
Card PM	Report Top Like Quote Reply

TSsoulfly	Jan 7 2008, 12:02 AM Show posts by this member only \| Post #262
revving towards 10,000 rpm VIP 15,903 posts Joined: Jan 2003 From: Miri	cpu stepping dude?
Card PM	Report Top Like Quote Reply

limsa007	Jan 7 2008, 01:25 AM Show posts by this member only \| Post #263
New Member Junior Member 29 posts Joined: Jan 2007 From: Penang	Mobo: Abit AN8 Ultra CPU: AMD 3500+ @ 2.5GHz, 277MHz FSB * 11.0 multiplier (Venice) 1.625V, NBBWE 0607CPCW RAM: Kingson 512mb Kingston Cheapset x2, Kingston 512mb Samsung x2, 2.5-3-3-7, pc3200 Heatsink: TT Silent Tower http://valid.x86-secret.com/show_oc.php?id=293300
Card PM	Report Top Like Quote Reply

speedrider	Jan 7 2008, 10:34 PM Show posts by this member only \| Post #264
Casual Junior Member 403 posts Joined: Jul 2005 From: in front of your house.... peeping	QUOTE(soulfly @ Jan 7 2008, 12:02 AM) cpu stepping dude? oops sorry boss... I forgot to check the cpu stepping. But i'll update it on this weekend. this is the CPU verification. Sorry. I've snapped it with CPUZ v1.4, but validate it using v1.43 http://valid.x86-secret.com/show_oc.php?id=293762
Card PM	Report Top Like Quote Reply

^KamilskaZ^	Feb 24 2008, 10:32 PM Show posts by this member only \| Post #265
roar...roar.... Senior Member 1,222 posts Joined: Jan 2003 From: Melaka	QUOTE(speedrider @ Jan 6 2008, 05:03 PM) I'm stressing it more... CPU: AMD 3200+ @ 2.34GHz, 260MHz FSB * 9.0 multiplier (Winchester) RAM: 2* 512MB KVR chipset HYNIX DT-D43 3-4-4-8 divider 333MHz @ DDR426 Mobo: Abit fatal1ty AN8 SLi But this time, I'm using stock HSF. Air cooling... bro nice ram ur have.my experient,ur can try 1:1 divide with 2.85v and timing 3-3-3-8
Card PM	Report Top Like Quote Reply

Holi^oNe	Apr 19 2008, 05:33 AM Show posts by this member only \| Post #266
Getting Started Junior Member 169 posts Joined: Jul 2005	Might be against forum rules , but I figured I'd try my luck here. Can anyone help me with the problem I'm facing ? I'm running an opty 144 with a DFI SLi-DR Expert board. Earlier after 2 years of not touching my pc went and tinkered with my perfectly okay system and I "accidentally" shorted the clear CMOS jumper while the system was still running. So naturally the system tripped. Now I can boot up but I'm not able to enter my BIOS. I have a hunch that all I need is to reprogram the BIOS. I checked and I found out that the Asus A8N-SLi board uses the same BIOS chip as the Lanparty SLi-DR Expert. My question is if anyone knows wheter I can hotflash the BIOS chip in windows mode using the winflash utility with a different brand motherboard ? Or would my chances be better using a DFI board to hotflash ? Any help from forumers would be greatly appreciated (if possible via pm)~! Thanks in advanced. Sorry if I posted in the wrong section.
Card PM	Report Top Like Quote Reply

e-jump	Apr 19 2008, 07:04 AM Show posts by this member only \| Post #267
┐( ¯3¯)┌ Senior Member 4,784 posts Joined: Sep 2004 From: MY	why windows, when you can also do it in DOS. I did cross flash my epox 9nda3+ on msi neo2 plat in DOS 1. boot neo2 into dos 2. replace epox chip in 3. force flash (use /f switch or something) 4. . . 5. PROFIT
Card PM	Report Top Like Quote Reply

Holi^oNe	Apr 21 2008, 07:49 PM Show posts by this member only \| Post #268
Getting Started Junior Member 169 posts Joined: Jul 2005	I tried to force flash and also winflash but both didnt work. The chip is recognized as an A8N-SLi Bios but the core information is all the latest one for the DFI board. So my solution right now is to either buy a replacement chip online or request / pay a fellow forumer to help do a hotflash. To anyone who has a Lanparty SLi-DR Expert within the Klang Valley who is willing to do a BIOS hotflash. Please drop me a pm. I won't mind paying abit of money for your services. Thanks alot.
Card PM	Report Top Like Quote Reply

edkiasu	Jul 7 2008, 03:02 PM Show posts by this member only \| Post #269
ºº 1/2 Retired ºº Senior Member 970 posts Joined: Nov 2006 From: ™º♫♪♪♫♪♫♪♪♫♪♫♪♫º™	Here, i feel like wanna OC my system.. Because when i play crysis or assassin's creed, will felt laggy and sometimes even hang for few seconds when there're high graphic effect.. Below are my system's specs: PSU - SilverStone ST400 400W Real Power Mobo - Abit kn8 ultra Proc - AMD64 3000+ venice core 1.8MHz GC - Msi 9600GSO-OC Ram - Corsair Value Ram DDR400 PC3200 (2x1GB) Some CPU-Z and GPU-Z attached as below: Details of my CPU Details of my Mobo Details of my Ram Details of my GC Please teach me how to OC all those things at stable status, ur help is much much appreciated!!
Card PM	Report Top Like Quote Reply

bulibulizaimon	Aug 30 2008, 01:12 PM Show posts by this member only \| Post #270
PSN : bulibulizaimon Senior Member 4,667 posts Joined: Jan 2005 From: UniVeRSiTy Of MaLaYa	OC ur CPU using ClockGen OC ur VGA using Coolbits
Card PM	Report Top Like Quote Reply

« Next Oldest · Lowyat.NET Overclocking Database · Next Newest »

Add Reply Options

Change to:

0.0761sec

0.36

6 queries

GZIP Disabled
Time is now: 25th November 2025 - 03:03 AM

All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)

Removal Request

Powered by Invision Power Board © 2025 IPS, Inc.