Opteron 144 CAB2E 0610 GPAW | pcmoddingmy | 2808MHz | 1.488V | Opteron 144 E4 | Water cooled (passive rad)

Main Specification
--------------------
AMD Opteron 144 (CAB2E 0610 GPAW) S939
2 x 1Gb Corsair XMS3500LLPRO 2.5-3-3-7-1T
DFI LP UT RDX200 CF-DR
SilverStone ST60F 600W Modular PSU


CPU Cooling Method
------------------
Aquabox UV Water Cooling
Big ass external passive radiator
Arctic Silver 5

BIOS Set Values:
--------------------
Socket 939 AMD Opteron 144 @ 9 x 312 = 2808MHz
Vcore = 1.500V
Vdimm = 2.65V
SB PCIE V = 1.9
NB Analog V = 1.4
LDT Bus V = 1.4
NB Core V = 1.4
LDT multiplier = 3x
RAM divider = /12


Screenshot:
--------------

*Click for full image

P/S: The Opteron 144 was purchased via kingmaker @ LYN Some managed to Prime at 2.8GHz at stock Vcore but mine wanted 1.488V...

Guys,
Anyone with AM2 overclocking yet?
Well, let me be the first then.....

LBBVF 0619 SPBW | pcmoddingmy | 3010MHz | 1.616V | 3000+ Orleans F2 | Water



Setup:
3000+ Orleans F2 0619SPBW
Biostar TForce 590 SLI Deluxe
2x512MB PC2-4200 DDR2
Corsair Nautilus500 w/c
FSP Epsilon 700W
GeForce 7300GT DDR3 SLI

This post has been edited by pcmoddingmy: Jul 4 2006, 11:22 PM

Cool... we shall wait for your results then.
Which mobo & ddr2 you have prepared for your AM2 setup?

Welcome to Biostar club!
But if you're gonna get some fatbody Microns (D9), I guess you need more than 2.3V. If I recall properly, your TForce 550 should come with a 2.3V jumper... But the problem is, even if you had enable the jumper... the VDIMM will not go beyond 2.2V. Well, atleast this is the problem I'm facing with my TForce 590 SLI Deluxe. I have two pair of fatbody Microns and they can only do up to DDR800 at CL4. I might have booted at DDR880 before but I don't remember them being stable with just 2.2V.

Once I'm done with the it, I might give it a Vmod to get about 2.5-2.7V...

I think the MSRP should be around RM700-800, but this board is not available for sale yet.