Hi, anyone know how to configure draytek for voip in Thompson to work?
The configuration now is bridge mode in thompson to get voip and let Draytek to connect
Alcatel Lucent > Thompson > phone & Draytek

However, I found instability in the connection where some times it will lost connection for around 1 minute and get back to work again.
I do not know the instability is caused by the thompson or the problem from ISP. I want to try configure it as follow
Alcatel Lucent > draytek > Thompson > phone
I already configure the vlan as follow for the internet which is working


Then I configure the Multi VLAN for the WAN


I connect Draytek LAN port 2 to Thompson WAN port but the voip of the thompson is not working. I go into it's web interface, I see that it's ip address under voice is 127.0.0.1, it cant get ip address from isp.

Refer to https://forum.lowyat.net/index.php?showtopi...post&p=53813946 , seems it can be done in mikrotik. but how about draytek?

I'm using Draytek 2912n, anyone can access the demo web interface from http://eu.draytek.com:12912/

is dd-wrt router supported for maxis fiber broadband?
I have a DIR615 with DD-WRT, and would like to use it as I am considering to upgrade from Unifi to Maxis fiber.

Is there a guide if I am using astro IPTV as well? The stock modem gives massive lag whenever another device in the network downloads something. Dosent happen on other routers.

halp. or will a wifi extender solve this issue?

Hi everyone, i will be getting maxis fibre internet service soon in my office. Currently using Unifi and now adding maxis fibre internet as a backup internet.

The technician told me, will connect the maxis router to tm modem. If let say tm modem goes down, my maxis connection will be down also. No other way for the maxis router to set up?

Need your help and suggestion on this guys.. thanks

Hi All,

can anyone please help to show me step by step to by pass the Technicolor router for maxis. I have a Asus RT N 12 and would like to use it as i have read there are so many problems with the Technicolor router.

I have Astro IPTV without the VOID. I need help to do this, where the cables to plug and how to configure it.

Also i have read that i need to do a DMZ, how to go about this. Please help.

Thanks in advance.

hi is there possible to use unifi old dlink router to maxis?

anybody manage to bypass thomson router, as in connecting the VOIP straight to Tm huawei hg modem?

my current setup is TM Huawei HG655a modem, TP-link WR841ND and the thomson router.

Yes. There is a thread on how to setup VOIP on HG655a.
You try search for it.

any sifu's here can help me?
i wish to use custom router to replace the lousy thomson router
i was using the same wireless modem router as below & follow the steps given
http://klseet.com/index.php/225-tm-unifi/u...60n-unifi-setup
but at the end i just getting dns server isn't responding
maxis provide me alcatel-lucent ONT not the huawei ONT
anyone know how to solve my problem?

did you chage the vlan from 500 to 621
different ONT shouldn't be an issue i think

Solved.

This post has been edited by ati radeon: Sep 20 2015, 02:11 AM

Anyone can help me share their Huawei HG850a configuration file, I'm changing the Lucent Alcatel I-240P ONT to Huawei HG850a so that I can set the VoIP with HG850a and totally without Thomson router.

what's the best n strong wifi router to replace the Thomson one?
what configuration I need to aware?

From the pictures above the reason why I still need the maxis Thomson Gateway because I still need its VOIP rj11 plug -> to my VOIP gateway (IPPBX)
I dump the VLAN621 of the Maxis "internet" to this Mikrotik because the maxis router (Thomson) for internet sucks (hang) if lots of concurrent connections

I am using Mikrotik that support VLAN, that's why i still port the VLAN621 over instead of untag it on the Huawei VDSL modem

Thumbs up for this tutorial.

This post has been edited by eddie_lim: Oct 12 2015, 02:53 PM

Hi Guys,

I just bought the TP Link WDR3600 to replace the Thompson router. Can I just configure all the VLAN to internet if I don't use the IPTV and the VOIP as I want to maximised the available LAN port to my others wired network.

No probs bro. Thanks

Don't think you can as they are hardcoded. You may hwoever do so with Asus routers that support TM UniFi & Maxis Fibre (if using latest firmware).

Alternatively, buy a 5-port or 8-port switch to have more ports.

Yes you can, I don't think TP Link WDR3600 support VLAN with PPPoE
just login to the Huawei's gateway, with the tutorial on the first page, untag the VLAN part, then use your TPlink WDR3600 for PPPoE.

Enjoy

This post has been edited by eddie_lim: Oct 16 2015, 06:00 PM

Yes, all my 4 ports now configured to VLAN Internet and working fine.

However, I can't connect to the Huawei Hg655a as per the first post. I connect my PC lan to the Port 1(tried also port 2) of the Huawei Hg655a and configured the PC IP to be 192.168.1.111 and the gateway to 255.255.255.0. I just can't connect to the 192.168.1.1 login page of Huawei Hg655a.

I wanted to use the port 2 of Huawei Hg655a to connect to the Thompson router for VOIP while port 3 of Huawei Hg655a to my custom router. The only way I can use my VOIP now is to connect the Thompson router to Port 2 of Huawei Hg655a but doing so, my custom router is down.

Subnet 255.255.255.0, not gateway