So that means I don't have to change the Mac address right?
I just have to somehow get the authentication from old modem and then put it in the new modem?

Do you have instructions (for putting the authentication in the new modem)? if not thank you at least for letting me know about the mac address issue

For my case I just key in the authentication password, I heard that it varies by area though

For most area, maxis service is served via TM unifi infra which maybe different from mine

This post has been edited by yongtjunkit: Jul 15 2020, 05:56 PM

Deleted


This post has been edited by jetblast: Jul 16 2020, 04:52 PM

I just tried I don't think it's working
What's the authentication I'm suppose to be finding? The ONT authentication? TR069 parameters?

ONT authentication, mine is from old Huawei modem to new Huawei modem and using maxis FFTH infra not TM infra

Didn’t bother with TR069, I believe that’s for maxis/TM to remote into the modem

Maybe here would help
https://forum.lowyat.net/topic/4925452

This post has been edited by yongtjunkit: Jul 16 2020, 02:09 PM

I was hoping the TM infra wouldn't be different.
Good news is the ONT Authentication worked... for like 5 seconds I had internet, then it didn't work anymore (I assume they blocked the new modem mac address). I have to call up TM to bind the new modem MAC address.

I don't really feel like calling just to change my modem because you said there's really no difference.

Thanks for answering my questions

I just bought the new archer AX50, I use the AX50 as the main router and using the same method connect my LAN4 to WAN on the maxis router. Instead of getting a dial tone, I am getting an engage one on the DECT phone. Any idea you might share what causes this issue?

sorry man can't help you on that

Anyone know how to connect deco x20 directly to the modem instead of modem > maxis router > deco x20?

https://www.lazada.com.my//products/i162778...uw&urlFlag=true


D-Link DSL-G2452DG Dual Band Wireless AC1200 VDSL2/ADSL+ Modem Router with VOIP..
AnyOne using this modem? share me the review.
Most importantly, can this replace the aminia router directly with VOIP on? cause i call alot using maxis voip

Dear Sifus

Good day.

I subscribe to 300Mbps Maxis Broadband package in Dec 2020, and the speed (with Asus Ax88u) was able to achieve around (using Speedtest, connect to 'Subang') between 300-310Mbps for the first 2 weeks. But.... it suddenly dropped till 90+Mbps after that, even after I restart and reset router few rounds. Then, I complained to Maxis, who requested me to change revert back to their tplink router, and then they sent Maxpert to my house to investigate. The Maxpert came and reset the maxis owned Tplink router, right after that, the speed was around 230-250mbps with TPlink Router. After the Maxpert left, I switched back to Asus Ax88u router, reset it, and able to get 300mbps. But, 2 days later, the speed dropped (again!) to 95mbps despite few round of reset (on Asus router) and restart (both router and modem). Since then, I get around 90-95mbps.

Pls allow me to provide the brief system schematic as follow:
- Maxis Modem (aka BTU by Fiberhome HG6240A)
- Router is Asus RT-AX88u, firmware 3.0.0.4.386_41249 (replaced Maxis Tplink) that connects to Modem/BTU via Cat 5E ethernet cable, with QoS, IPv6 & DDNS (cloudfare) configured. (tested speed with and without these setting, outcome still same)
- Intranet (to different rooms/space) with Gigabit Switch via Cat5E ethernet cable.
- Mesh Node (Asus AX82u firmware 3.0.0.4.384_10177) at upper floor, with Ethernet backhaul via Cat5E cable, that connected directly from Ax88u (not thru Gigabit switch). (tested speed with and without MESh configuration, outcome speed same)
- Wifi 2.4GHz and 5Ghz are separated with different SSID.
- about 20+ nodes connected to the network (70% connected via 5Ghz) at anyone time.

The speed (both wireless and hardwire LAN, at both Ax88u and AX82u end) was around 300mbps before it drop to 90-100mbps. The speed testing was performed using speedtest.net, Nperf and fast.com from Dell XPS Laptop (with WIFI6 AX200 module), thru both WIFI6 (5Ghz) and Ethernet Cat5E cable connection. 1 thing I notice that, the WAN port connection speed (that connect from AX88u to BTU) is only 100Mbps now. Previously the WAN port speed was indicating 1Gbps when the wifi and LAN speed was (capped) around 300mbps during the first 2 weeks (after switched from unifi in mid dec 2020) speedtest checked.

Currently, with these set up (Asus Router and Asus Mesh), the speed is running around 90-94mbps now. And for the past 2 days, my users (including me) are experiencing lost- connection (both Ethernet and Wifi) intermittently (for few seconds) during MSteam & google class session, not mentioning 'video loading' slowly. FYI, I never experienced 'video loading problem' during my unifi-time (with 100mbps only, and the same AX88u set up).

What surprised me was that, when I switched back to Maxis-Tplink router (again & again), the speed is in the range of 250-270mbps without fail.

Would appreciate if Sifu could help me to resolve this issues for these Asus routers. Is there any special setting in Asus Router for Maxis Fiber? Or, is it possible that it is caused by BTU (from Fiberhome HG6240A) that incompatible wth Asus AX Router?

Thanks.

Any idea redmi ax6 can use SSH connect with maxis fibre

Perhaps connection between ax to btu caused the issue..it should 1gbps connection..you can try to change auto negotiation speed on ax router or hardcoded to 1Gbps

Hi all,

I have a problem currently with my Asus Routers which can be solved after searching the web and calling for helps and CS.

Basically i bought an Asus router RT AX55, after configuring the settings, setting up the PPoE changing the IPTV, i m still unable to access the internet while the maxis router which they provided can.

Reason for changing router, the maxis router the provided was years ago when i subscripted to maxis. The wifi coverage unable to cover my entire house hence the changing of router. Moreover, im a noob when it comes it IT. Tried my best calling CS to upgrade router but they told me to wait more then a month.

Any input is welcome.

Thanks in Advance.

Select maxis fiber or maxis fiber special(for maxis infra) under lan> IPTV

Make sure that your pppoe username and password is correct

You may be better served by posting in this thread instead( asusMY official thread): https://forum.lowyat.net/topic/2651405

This post has been edited by yongtjunkit: Apr 11 2021, 07:05 AM

did your try to update latest firmware?and try again

Hi Sifus,

Quick question. I have TM modem HG8240H5. Anyone knows how to login as I want to enable VOIP in the modem itself.

I have tried telecomadmin/admintelecom and tmadmin/Adm@XXXX (XXXX is the last 4 digit of your modem MAC address).

Both options do not work.

Hi All,

I'm still using this Maxis Technicolor TG784n v3 and its been years, anyone still using this and if you know if its possible to request for a new router upgrade from Maxis?

Thanks.

you can goto here view there post, i forget which page have tell how to login
https://forum.lowyat.net/topic/4925452

you want to change router from maxis, get high speed and new contract. than they will change for you

it not just buy router yourself betterr

This post has been edited by delaciox: Jul 9 2021, 04:37 PM