I KNEW IT!!!!!!! Yiu go ask around, almost all aged Shawie got the same problem I tried ask my magician, figured the thermostat could be the culprit. I have not decide to remove it as I do not wish to jeopardize the cold start emission control, neither I want to spend money for replacement due to expansive price. I put in a brand spanking new external fan infront of cooling condenser Plobrem solved

so its actually more on to thermostat prob? can explain abit detail on the bold?

COULD be thermostat. May be it rusted, unable to fully open for water flow.


To answer the bold part, add 1 more fan infront Btw, not my car. Just found some similar setup to show you.


Follow ignition (key switch). After engine off, it will spin minimum 15 seconds. Sometimes up to 5 minutes

this fan affect more to car temperature than a/c is it?

Shawie akon kondenser located infront of radiator, so regardless lar. It will cool down the radiator no doubt, but the side effect is having a very fast cooling effect akon. When kondenser faster cool, kompreser no nid work so hard. Kompressor no work so hard means FC no nid sorhai so high However, if u r no akon worshiper, then u wont see the efek lar

i need a/c la. btw, how much u mod the fan?

Cant remember correctly. If not mistaken, fan + wiring + relay + fuse + holder + bolt all together RM100 or may be less If not mistaken la.

cheap!

update place to do this mod..

thinking of doing for my lil bro.. add on..

well, my temp prob before already fixed.. just to add up cooling..

H&K at Dengkil Jln Banting

click here next to post office

This post has been edited by davidke20: Feb 25 2013, 05:58 PM

whoa..it's really cheap price.. Is it including the labor fees?

Yes. does 180 tinting film include labor? I fuckin with you, I know and already have another car done by RayTech. I know you purposely come in and bump your own siggy ads

so sad..my savvy bumped a strong peugeot 308 this morning. Luckily savvy is built tough, some damage to the grill, bonnet, lamps and front parts. Anyone sent their cars for repairs to this City Alignment workshop in Kayu Ara before? How's their services?

hi sifu sifu, can i ask about the gear oil for savvy manual, is it necessary to use the original proton want which is RM 36 per litre??? or the other brand like NAZA gear oil which cost about RM 48 for 4 litre also can use?? for sifu who know about it, can u comment here with your experience??? thanks

i'm no sifu but i tested the cheap rm25 gear oil (pumped type).. hell no to that oil.. use less for 500km.. change back to ori elf gear oil.. expensive but nice smoothness to change gear..

make sure rating and velocity same as the elf one, then you're ok to go with any brand and price..

"Elf Tranself NFJ 75W-80 Gear Oil 1L RENAULT Approved"
price around 42 per litre last i change..

This post has been edited by NOX: Feb 28 2013, 09:47 AM

hi bro's..

sorry.. refresher question & answer for me.

need to service the my AMT and wanna DIY myself. previously i send to workshop for service and collect at the end of the day.

robotic oil in the proton service list is the ELF D3Syn ? or different ?
last time proton put the shell gear oil in my car. is this diffrent oil ?

Thank you for your support anyway

Engine oil blown up from PCV to intake hose, and got suck in by throttlebody


As an when throttlebody was removed, engine oil being spilled out from the manifold


And it's everywhere. Current record, 1 week almost 1 litre gone


Next project, oil catch can

DIY? or buy 1?

i'm using DIY one..

but need regular change.. every 6 month change the filter (rm8 - saga filter)..

I'm no AMT user, but lotsa my savoc friend using elf d3 oil for the robotic aka AMT oil..

the rules of thumb is as long as thickness and rating of oil same, its ok..

* but do ask for mechanic opinion rather asking a non AMT user.. hehe..

This post has been edited by NOX: Mar 1 2013, 09:24 AM

-double posto-

This post has been edited by NOX: Mar 1 2013, 09:25 AM

http://forum.lowyat.net/index.php?showtopic=2691435&hl=

i involved in accident on rear savvy door.

the tow motor company saw front little kemek but proceed to change 2 fking door , just for their earning ,

they tell me a hint , i need to fork out cash , when i ask how much they tell me dont know yet (their tactic)

when i ask ,they bring me to this chin lak tow motor company nibong tebal M.D. ,

i ask why didnt tell me ,they say after 5 years insurance didnt cover fully , so they couldnt find used door , and i ask why never tell i can try source too ,they say i never find him , from their clerk or watever people i call to ask , they say dono the cost , pushing here and there ,

and we ask why little spot on front u changed the door , he didnt tell and twist and turn , already changed ,

he charge rm2000 to insurance and insuance claim rm1.4k , so i need fork rm660 , they say no discount , just want take back their 'cost'

so finally i say rm600 he say ok la ok la.

from the door i take back is it just a little spot ,

if anyone want to source or buy
here my door on driver side http://forum.lowyat.net/index.php?showtopic=2691435&hl=

This post has been edited by kctan87: Mar 4 2013, 02:52 AM