How much did you buy from synchroweb?

RM1000. This includes the rackmount kit

Nice deal. Mine got for RM900 for the RB5009 and RM60 for the rackmount kit. I am a returned customer so yeah they got discount for that

Yeah, I still think RM1000 was a good deal with the rackmount kit since it was sold out at SubTel and Precomp was selling for RM1023 without rackmount kit. But this was my first purchase with them so hopefully when I go back to purchase the CRS328-24P-4S+RM switch from them when they get stock, I can ask for a bit of discount

I am using Time Broadband and would like to get rid of the fibre modem and instead use a SFP Module in my Mikrotik Router.

I heard that it is possible but have to get Time Broadband Support to update the MAC address in their system...

Anyone here has already done this and who can share a how-to?

Actually you can. Refer to this thread https://forum.lowyat.net/topic/4925452

Thanks man - in the meantime I got a stick... but still struggling to make it work.

See also here; I posted directly in the thread you suggested.

And again thanks for your support so far - I am not a total networking noob but only do it more as a hobby at home and know that I really need to learn a lot more

Testing my newly configured routeros

Yours not RB5009 right? The problem only exist in RB5009 running v7, other models not affected.

Screenshot is D52G-5HacD2HnD, should be hAP AC2.

I once pushed normis in mikrotik support forum, he seems tensed enough handling bugs and issues reported in the forum regarding v7 haha

I rolled back to v7.1.1 already...
Not sure is that v7.2rc1 having ethernet port flapping problem or not.
I had few days of sudden Wan Ethernet Port down,and 1sec up again.
one day happens 2-3 times. (BTU Lan 1 to RB5009 Ethernet Port 2)
Or is that BTU fault?

i dont have rb5009.overkill for me.100Mbps unifi cgnated.

Hello,

Anyone using hap ac3 ?
I have some issue for the wifi with iphone 13 pro.

There is no internet connection with iphone 13 pro. The wifi is working fine with my laptop with windows 10 os.



Anyone facing this issue before ?

Can you access the webfig using ip address on safari?

any expert/ seller from northern? i wish to install one

You can get from Synchroweb or Subtel

Hi all,

I bought a RB4011 last year for my 100Mbps Unifi. My last reliable networking equipment was linksys wrt54g which works until wireless-g no longer viable. Any equipment afterwards like consumer tplink or asus eventually having slow downs, hang, restarts or overheat. Thats why I buy this overkill equipment for peace of mind.

I love its cpu attached to chassis, passive + very good heat dissipation. I don't like fans as they collect dusts and generate noises. most consumer flagship routers needs a fan at some point.

I pair this router with omada APs. 1x 660HD and 2x EAP225. Having around 30 2.4Ghz Smart home IoT devices and 10 5Ghz devices. Dedicated HikVision analog cctv attached to ethernet.

Now my router CPU never go beyond 6%, most of the time 1%. any fun stuff I can do to utilize it's power?

I do see from Omada I can configure 1 ssid for 1 vlan, and I see a lot of people tend to isolate their iot from main network. But how will they be able to control their smart light from their smartphone directly if they are separated into different vlans?

I do see Omada have Guest network. It seems that it is done inside AP where trying to access other vlan will drop the packet. Could be fun to shift this responsibility into router. For example, having 20 phones using the guest network at once. Not sure how well the AP itself can handle this though.

As for QoS doesn't seem needed as this router handles everything instantly. maybe my simultaneous load is not enough.

What kind of fancy configuration do people do with their home firewall? From most I see could be port forwarding to maybe their cctv or nas.

And it seems I'm running out of ethernet port soon, just attach my existing unmanaged tplink 8 port switch to one of the ports? since the cpu load is so low. i envy the rb5009 so much with a nice switch chip inside

just being hand itchy and want to tinkering with some stuff lol, doesn't seem I have some objective or issues to fix here.



yes that heatsink is just for fun because I had too much bad experience with router overheating hahahaha.

I use 2x stock poe injector that comes with eap225 and for 660 i buy another one for poe+. feels cheaper than poe switch and fully passive. if one of them spoil easier to replace as well.

rpi4 for home assistant + multiple iperf3 in docker for wifi tests.

This post has been edited by NoobHacker: Feb 1 2022, 10:54 AM

Nice setup. However the cable management have room to improve. Hahaha 😝

Nice...

What UPS do you use?