Hi Bro,
router hAP AC2 can support how many user? is it can support up to 100 user? for office purpose.tq in advance

Any idea on repair on out-of-warranty mikrotik product?
Mail to rma@mikrotik.com ?

What is ur problem bro?

Previously connect to Streamyx and port got lightning strike, can boot up but the port is unable to use.

Set ppoe dialer on different port that working

Considered lightning strike you can't repair those burn LAN port RIP bro

I use below console command, "Unifi PPPoE" is my pppoe dialer interface, you need to replace it with your interface name. 

- interface=bridge-local  (bridge-local is my data vlan bridge, replace with your data vlan bridge name)

I have problem with some site like lowyat, therefore i temporary disable it. Didn't really spend extra time checking it.
____________________

/ipv6 nd
set [ find default=yes ] disabled=yes
/ipv6 dhcp-client
add add-default-route=yes interface="Unifi PPPoE" pool-name=general-pool6 request=prefix
:delay 10s
print

/ipv6 address
add address=::1 from-pool=general-pool6 interface=bridge-local advertise=yes

:delay 10s
/ipv6 nd
add interface=bridge-local ra-interval=20s-60s
/ipv6 firewall filter
add chain=input action=drop connection-state=invalid comment="Drop (invalid)"
add chain=input action=accept connection-state=established,related comment="Accept (established, related)"
add chain=input action=accept in-interface="Unifi PPPoE" protocol=udp src-port=547 limit=10,20:packet comment="Accept DHCP (10/sec)"
add chain=input action=drop in-interface="Unifi PPPoE" protocol=udp src-port=547 comment="Drop DHCP (>10/sec)"
add chain=input action=accept in-interface="Unifi PPPoE" protocol=icmpv6 limit=10,20:packet comment="Accept external ICMP (10/sec)"
add chain=input action=drop in-interface="Unifi PPPoE" protocol=icmpv6 comment="Drop external ICMP (>10/sec)"
add chain=input action=accept in-interface=!"Unifi PPPoE" protocol=icmpv6 comment="Accept internal ICMP"
add chain=input action=drop in-interface="Unifi PPPoE" comment="Drop external"
add chain=input action=reject comment="Reject everything else"
add chain=output action=accept comment="Accept all"
add chain=forward action=drop connection-state=invalid comment="Drop (invalid)"
add chain=forward action=accept connection-state=established,related comment="Accept (established, related)"
add chain=forward action=accept in-interface="Unifi PPPoE" protocol=icmpv6 limit=20,50:packet comment="Accept external ICMP (20/sec)"
add chain=forward action=drop in-interface="Unifi PPPoE" protocol=icmpv6 comment="Drop external ICMP (>20/sec)"
add chain=forward action=accept in-interface=!"Unifi PPPoE" comment="Accept internal"
add chain=forward action=accept out-interface="Unifi PPPoE" comment="Accept outgoing"
add chain=forward action=drop in-interface="Unifi PPPoE" comment="Drop external"
add chain=forward action=reject comment="Reject everything else"

Can I use this method for TIME dotcom? Or TIME does not yet support for IPv6 in mikrotik?

Ok limited stock arrived PM for details :-)

RB4011iGS+5HacQ2HnD-IN
Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU, 1GB RAM, SFP+ 10Gbps cage, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac wireless and desktop case

Mikrotik RB750GL from 2011. Still relevant in 2019.
RouterOS 6.43.12
Fasttrack ON
CPU Usage: ~80%

Tested on Turbo 800Mbps.

Hehehe just a quick update

Manage to play the RB4011 with WiFi using 1 Gbps Fibre

Speed is quite great

Only able to pust maximum capacity speed with fasttrack rule enable





Anyway here is the video

Hehehe just a quick update

Manage to play the RB4011 with WiFi using 1 Gbps Fibre

Speed is quite great

Only able to pust maximum capacity speed with fasttrack rule enable
...

Very nice bro. How fast can the RB4011 go with Fasttrack OFF?

Around 300 to 500