2.5 is common....i only wanted to see ure 2.7 last 4 8hours prime stable....tat'll be something to drool at if it's accomplishable

btw y no 1 recomend SNM??? it's way better program to stress ure overclock coz it can detect error in a matter of minutes while prime/sp2004 needed 22 minutes to do so....somemore ure temp will be way higher compared with stressing with prime

if it's really unstable, using super pi will determine error easier

for stress program, i personally thing CPU Burn-in and SiSandra burn-in is more stressful and produce more heat than Prime.

U can adjust prime loops to 2mins per loop for faster error detecting.

I did not say 2.5Ghz of mine is not common I haven't tried pushing further because i'm using a brandless PSU, and i haven't really work it out yet. Don't worry, if i manage to push any further, i'll for sure post it here

HAHA okay ppl finally curi time from work and WoW to update the list for your viewing pleasure!

I must have missed this somewhere but where do u ppl happend to get your 'desktop' replacement procs from ah?

oem tray package athlonxp should be the desktop replacement one....

i got mine from gengstapo

oem tray package?

i got mine from All IT Lowyat Plaza..
RM430 .

tone.

which means... no box, no heatsink

only in small plastic tray

Okay lah here i go again.

230x11
2530 mhz
bios set vcore 2.0
cpuz vcore 1.9
TT bigwater.



Attached thumbnail(s)

Desktop Barton @ 2.4GHz Prime95 10hrs with 1.55v

TestBed:
AMD Desktop Barton with Locked Multiplier @ 2400MHz 11 x 218MHz 1.55v
Idle Temp 50c, Full Load while Priming 57c. Ambient 34c
Thermaltake Pipe101 Heatsink with 92mm Thermaltake UFO Fan @ 2300rpm
2 x 256MB KVR PC2100 Winbond BH-75 220DD DDR SDRAM
Abit NF7S v2.0 vdimm, vdd, L12 mod
Mantarays XT D26 BIOS 1T Command CPU Interface Enabled
Enlight 420W PSU
Medion ATI Radeon 9800XT 128MB 256bit @ core 438MHz / mem 380MHz
36GB Maxtor Atlas IV 10000rpm SCSI U320 HDD @ Adaptec 29320LP-R
300GB Maxtor DiamonMax Plus 10 7200rpm SATA150 16MB Cache HDD

Various Setting:
Vcore 1.6v BIOS set (Actual 1.55v)
Vdimm 3.27v
Vdd 1.5v
Vagp 1.5v
CPU Interface Enabled
Clock Ratio set to 6/6
1T Command preloaded in BIOS
Ras to CAS @ 5, If set to 4 will result errors in Test #5 of memtest86+

AXDA2500DKV4D Z402887C40859
AQYHA 0409XPMW


Prime 95 almost 10 hours passed


Welcome to challenge me with lower vcore.

This post has been edited by Austin: Mar 29 2005, 12:41 PM

OMG!!!! 1.5 onli arr may i know ur idle and load temp plss

Wahseh.. desktop replacement where can put here... that's relabed mobile la... haiya... sure win one la...

why don't u try lower your vcore. i think u got a good stepping also.

DESKTOP Replacement.

I don't know, it has full 3 years warranty and stock hsf = desktop!

Anyways, if it's a need to move to m-barton thread, I think we need people to vote.

this is my barton

u mean was ures izzit?

darn. mine's Tbred-B.

ya I bought it over from edi8888.....
Really a good gem...... >_<

yaya...was

u sure arr mine a good stepping? i try before 200 x 11.5 using default vcore but never try more lower vcore btw if less vcore the peformance also reduce leh but make a lot of heat if high vcore