If lower Vcore also gives you the prime stable, then it's still OK. Won't reduce teh performance....

It's always best when u can get stable at lower vcore. Lower temp, lesser power consumption.

here my setup currently but i got prob with the heat so iam not planning about to oc more for the vcore rite now iam using stock vcore i try sisoft sandra 2005 burn in wizard and did show any prob but even on default vcore my temp still reach 66c and on 1.7v even more like 69c

my update on previous post...AXP2500+ (AQYFA 0343 XPMW) with locked multiplier @ 1.8v, on air with TT volcano 7+...mobo dfi ui, 256mb x 2 kvr bt-d43 on dc with cpc on.....dont know why the cpuz detect my cpu as 'MP'...

CHICANOS, looks like u got a good locked Barton there. Try push 220mhz fsb, ram timing set 2.5-4-4-11

Yeah chicanos like my proc also.
heh but mine don't detect as MP loh.

walao load temp onli 52c arrrr??

as u wish master ...done @ 1.875v on air with tt volcano 7+ and ram timing is still same only up the vdimm...wanna try 230 x 11?...heh tak berani wooo better get wc...

cannot use lower vcore? maybe u need to burn in.

use CPU Burn-in utility to burn in straight 6 hours then lower the voltage by 1 notch, then try whether got prime error or not. repeat the process until u can get the most stable lower vcore.

or else u might also need a better cooling. SI-97 no regret

u got D43?

will do the burn-in...yup its bt-d43.

bt-d43 can do up to 250mhz easily with 2.8vcore 2.5-4-4-11

Vdimm*

2.8vcore

should be 2.8Vdimm... D43's maxed out at 2.9Vdimm

yala... if compare perodua kancil standard 850cc with daihatsu kancil mira with 660c turbocharged engine sure 660c turbocharged win ma.. small engine but more powerful... little vcore with higher speed.

*vdimm sorry typo

cpu=2406 (229x10.5)
voltage=1.975!!!
temp (full load) = 55c
temp (idle) = 51c
cooling=watercooled

after replacing the stock nb with a cooper 9500pro cooler and adding a sb heatsink and using a new PSU

my proc is a real pain in the ass to oc...but considering the core is cracked, i'm pretty impressed i made it to 2.4g but it's nowhere near stable yet....just barely meeting the ranking requirement.

CRACKED!! holy crap.
Haha. surprise that u can still start the pc!

good job haha. list updated.

/bump

haha i guess this one is going to end soon with the A64 taking over

=]

No, don't let it end Barton is not going to end so easily !!!