Ya agree with you antonio sir. but i do believe with a good voltage you can run at 4Ghz stable. most of thuban able to do it.

This post has been edited by verdict: Mar 22 2012, 03:08 AM

thuban can...deneb too hot

me on deneb now so power saving mode on... tried 4.0ghz before for 24/7 but it was just too much for air cooling....

unless d steppin is godlike one, else deneb on 4GHz for 24/7 is just... a dream for ac... possible, but hard to materialize.

Ya rite, deneb on 4Ghz is to much to asked during our time, yet you still the one with a highest record in our database iinm.

This post has been edited by verdict: Mar 23 2012, 10:23 AM

guys wanna ask. if i use SSD, it can improve any score in OC bench or not?

Yes, + / - there was slightly improvement in ur score.

guys. i'm facing problem during running superpi, got error message "no exact in round"

whats that mean. how to fix this. ram is oredy loose enough (1400 CL9-10-9 @ 1.67Vdimm) using KHX 2100 CL9. later i will post the ram pichar

mean cannot go la.. unstable..

voltage is kinda high for that speed and timing combo. you sure it's not cpu problem instead?

this is using divider at 1066. if i set below 1.65 volt, cannot boot or warning after post screen.
cpu oredy 1.52Vcore @3.9Ghz.. cannot squeeze anymore.

Agree with soulfly, it could be cpu related.. whats ur current cpu-nb speed & volt?

27XX Mhz @ 1.299V cpu-nb volt.
new problem. i enable all core, but in the windows, only 2 cores enable.
using penom II X4 945 + MSi GD65.. help me guys

9-series known to have unstable unlocked core compared to 8-series boards...

u sure that the other two cores are not locked/off in the bios?

more than 10 times oredy check, set manually enable all core or set auto,
every time boot into windows, still show only 2 cores enable...

i cannot find ACC (Advance Clock Calibration) setting in the bios.
i taught this board is quite good, expensive summore compare to my asus M4A 870TD/USB3
but this MSI 990FXA GD65 has a very good bios, 8+2 power phase. i love this features

currently use old bios, V19.6

iirc ACC dont exists anymore since 8-series boards

v19.6 seems to be the latest bios already, it probably did not unlock it

try lowering your clock speed, maybe the other 2 cores unstable @ 3.9G so the board didnt unlock it

oredy set to default 200X15=3.0Ghz..
oh sorry didnt capture the SS. upload later..

stock clock still on X2, the L.E.D for the power phase light up all 8 all time.
before this, only light 4 LED only, other will be blinking. now all 8 light up

hurm...try to reset the bios?

no idea what else u can do..

done some research but cannot find the solution. can we just enable it through windows?
using regedit or msconfig or any other way? yeah, exactly i have no idea what i'm talking about.
pening edy. huhu

no, if it cant see it means it cant see it...

just try to reset the bios or reflash it

Yup try reset bios, probably bug somewhere in bios