still not balance with ram setup...
the most lazy part play with the timing..

just use thos setting for ram, DDR 1600 @ CL9 is ok dy, push your cpu/nb

i'm now tweaking 2000mhz.. lol but loose timing..
alot of voltage to tweak..

wahhh..abang 8tvt using what ram?
come come show us some nice result

chapalang ram la.. still adjusting the voltage.. all mixed up already..
donno which causes instability.. coz in 3000mhz nb also..

Haih, if thats mediocre, then my proc can baling keluar tingkap already

Anyway, guess its time to move on. This proc been with me for a year+ already . Time to consider new mobo & proc combo

This post has been edited by joe_star: Mar 15 2012, 11:22 PM

cannot reduce the NB? isn't it suppose to have its own multi too?

i'm a noob also ... haih. it's so different than am2 nowadays.

wah, ram at 2000Mhz, cpu/nb at 3000Mhz.. what voltage for cpu/nb there...

k now still tweaking...

---

Added on March 15, 2012, 11:40 pmvery the hot! need WC yo..

seriously crazy.. play with the cpu-nb can sky high the temp...
how am i need to push 4ghz cpu... go go go..

---

Added on March 15, 2012, 11:51 pmNB freq need to sync with ram 3 times.. reduce NB will hold the ram speed..

e.g.: 1600 (800) ram with 2400 nb
so 2000 (1000) ram with 3000 nb



This post has been edited by 8tvt: Mar 15 2012, 11:51 PM

wah...abam 8tvt how much volt u push into nb?

not mediocre lah bro, just average, same goes to yas. if mediocre most likely can do stock only or lower.

yeah, it's time to move on to 9xx series, they tend to offer better ram mileage while require less volt. can't comment on cpu mileage but should be around d same or slightly better, depends on d board u use thou. so far, i'm a happy user of gd80 & chv, with d latter bein better in term of pwm coolin...


bro, what cooler ur usin? at that kinda clock, temp shouldn't be that high, something is wrong there.

like what dafreak said, i'd really like to know d imc volt. try to play with d llc for cpu & cpu-nb too to get d optimum voltage for both.

theoretically is like that but it's kinda hard for imc to go over 3k without pumpin lotsa volt. thuban is capable for 2100+ for 24/7, while imc wise 3k is d max i reckon > from experience.

This post has been edited by ah_khoo: Mar 16 2012, 10:39 AM

He's using his old trusty Noctua NH-12UP lah khoo, that thing on X6 is

ic see bro, but still too much leh... i think 12UP should be in d same leage as cogage TRUE spirit, i don't remember a 3.5GHz can cause such high temp... it's like a stock cooler liao...

vcore need to be shaved, on normal x6, 3.5GHz can be easily stabilized usin 1.3v +/- 0.2v. have no idea on zosma since i never play with one thou...

Hmm.... I must be misunderstood then, because from somewhere else the NB clockspeed formula is something like (CPU clockspeed*2)/3.15

i don't really stick to certain formula sir, but i remember readin somewhere bout d formula posted by bro 8tvt, in xs iirc. usually i just run d max setup for imc, ram & clock with volt within safety range...

This post has been edited by ah_khoo: Mar 16 2012, 12:27 PM

i have a stone age x3 440 but i cant seem to get it stable past 216 FSB?

mobo:m5a97, ram:kingston hyperx 2x2gb 1600ddr3, psu:mushkin 500w.

i set ram timings at 9-9-9-27
dram freq 577.9mhz
vcore at 1.4v

it used to be able to run prime 95 for a while with 225 FSB. is my proc dying? if it is i might as well run it at 3.7ghz......

Well it all depends on the cpu sir, sometimes its just the case of having a lemon chip which cannot go any further..
Mind posting SS of ur cpu, memory & mobo tab of ur cpuid?

Surely best to have felt 3000mhz with 1000mhz ram speed....me have 1033 ram but only running 800mhz coz cpu is still the old Phenom 2 X4

This post has been edited by antonio: Mar 16 2012, 02:54 PM

Whats the cpu temp when u were running this?