there is something i would like to ask about my speaker Z5500...
1)sometime when i hear song, suddenly it come out with an buzz that are quite annoying..
2)sometime i dont even know what happen, it suddenly doesn't output any sound...

somehow the problem can be solve by off the speaker for awhile then on again...
is this normal?? anyone else have the same problem as i have??

that must be something loose inside the circuitry

i don't know much,wait for people's experience

try replugging in the wires correctly. I think it may go loose sometimes

which wire?? the one that connect satellites or the one that connect to power??

1. Is it any particular song? Did someone turn on any electronics when it happen? Is it a specific speaker or whole system?

2. Yes mine happens sometimes.. off on ok dee, cos im using optical and it happen cos it coudnt detect the signal.

1)nope,not particular song...it happen so random...nobody turn on/off any electronic....and it is whole system...

2)i just using the 3 color wire that include in the package...i not sure why mine happen...

and when both happen, i will need to turn off and on the system...

try fiddling all wires and recheck if all of them connects well
if not then it must be something inside the circuitry that causes the problem

Tip:try to play it on other source to check (problems like this may also come from your soundcard)

Suspect some conflicts with the wires maybe it touches some metal thing. What output you are using? I am using optical cable i dont face such issue.
Like some forumer said maybe power surge or that buzz sound check whether any other electronic gadget or device near by?

Any logitech x-210 owner here? How's it compared to edifier M1335?? Real low budget for sound system!~ haha... Have not tested x-210 but from what i see in youtube, the performance is quite nice right? Just need a speaker to fit into a small room. haha

ok..will try it when i free...but speak about sound card,i dint encounter any problem when i was using x-540 last time...not sure why this time will...

i using the direct input, 6 ch direct...dun think have other electronic gadget, as the only electronic device is my laptop....

things can get old. Who knows when u switch the sound card suddenly faulty who knows

My Z5500's control pod backlight LCD isn't working anymore.
Should I RMA or not??? Please advise guys needs like 1 month to RMA and you have to RMA a full set.

any one know the place offering service to repair the amplifier for z680?

i want to increase my sound quality. currently using onboard SupremeFXII. Which one soundcard is better? budget is below RM500. Pairing with Z2300.
Priority is for music and movie. sometime for gaming.

1. Elite Pro
2. Xonar D2X

or other recommendation?

well i don't know if someone posted this before, since i can't find any result using search tools. it's someone who creatively crafted a new housing for his Logitech Z5500. I must admit it is a very creative mod. Here is Logiwood Logitech Z5500.



Source

ahha sweet
I want that logitech mod

Send to distributor at Subang.

u are certain its your speaker and not the source? Does it happen when you play a CD via a DVD player for example?

noobie1, I think you should get the control pod checked for issues. Your case is not normal and I believe its the firmware or the board is having issues.


Guys, my Z-5500 also having an issue not sure if its normal or not...I am using optical input, everytime I switch on my Z-5500, the volume is at zero (0) if the last played volume is below 50%. If my last played volume is at 50% then it remains at the last set volume even after I switch on again later.

Anyone facing above issue?

??

yup..shud be the speaker...because i was only use it for my laptop..and then..some time when i play movie, music or gaming...the speaker just suddenly no output...

ok..will try checked with my friend control pod then see how...

erm..ur problem...did u off the control pod then only off the power switch?? or u st8 off power??
i did face tat problem also..my friend told me that is because i st8 off the power switch...so i try to off control pod 1st then only off the power switch...and now it seem fixed...