Front or Rear?

---

Added on September 19, 2010, 10:56 pmDid you get any compensation from the Perodua driver? Or are you making a claim from the other party's insurance? Either way, hard luck.

This post has been edited by rckh: Sep 19 2010, 10:56 PM

anyone recommend any good shop to "usha" rim and tyre at Kuantan? im planning to change stock rim and tyre..

if so many good shop, can tell me which shop to avoid.. hehe

This post has been edited by cakarsakti: Sep 19 2010, 11:07 PM

It is ok, before Hari Raya, my 1st servic is on 1.7K. I just want to confirm all the problem to feedback.
This is my feedback item list and solution.  1K_feedback.pdf ( 89.8k ) Number of downloads: 224


This post has been edited by psphang: Sep 20 2010, 06:56 AM

mine is call to order and inform them that i wan to service at wat wat time lor..
I choose morning ...
about 9 like that..
I waited for 3 cars like that..
They din scold me, juz help me service and do some checking only..
I was there oso

haha....120km/h sapu corner, lambo no feel

i on middle of both line than go inner lane


last time when i drive wira i use PP2 with 50 series and with monroe reflex absorber, really like the feeling on cornering


seldom try on outer lane, because most of time got car lol

This post has been edited by chew1188: Sep 20 2010, 08:20 AM

If u successfully claim the orifice valve , pls do share ur receipt . so that next service I can claim them last service they did not install for me ..


Heavy ? if u want to installed those, better to include the Volt Stabilizer together also. can't say solve 100% , just abit .
I have installed Pivot VS-1 and some Grounding wire to my family's exora , I can say
- Slightly increased in Low-torque pickup
- Lower engine fan noise
- Increased Headlight brightness
- Lower FC
Never face such problem lo in the exora .. last time went up genting 5-6 person + luggage also no cut off

wao , nicely done .. this should me pin in the first page to let other know what to do in case some of those problem occur

This post has been edited by wilsonjack228: Sep 20 2010, 08:58 AM

my h-line eleganace has the problem No.2 (metal knocking sound when cornering on uneven surface), until now hvnt solve yet. what urs SC suspected or already find out the root cause?

hehe..sorry for my poor english
i meant my car need more power to move = more FC
btw, ericteoh grounding cable so far got good review.
ill try install pivot + custom grounding
thanks

Want to ask if anybody has installed Adjustable Cam Pulley in their car?
I want to move the torque powerband to the low end revs (1500-3000rpm). Which I guess is more suitable for a car that i will be using for 80% city drive.. Anybody knows how many degrees of advancing i shd adjust to optimize the torque?

This post has been edited by ZenGTMM: Sep 20 2010, 11:18 AM

wat is ACP?

Sorry .. Its Adjustable Cam Pulley.. Those that can adjust in +-2degrees increments one..

i need some advise.. last year, my brake got screeching sound during braking. already change brake pad (oem) and disc scheming (at SC). didn't really solve the problem, only reduce the sound. now the sound become loud again. they ask me to do scheming again.. every year must do it??!

actually i read somewhere it's the clip problem. i don't know true or not. but nobody can solve my problem yet.. and i don't trust SC anymore..

According to the manual, ATF change should be every 30K right? If I change it every 20K, would that be overkill? Coz I do a lot of long distance driving. So I figured I change it more often to protect the GB. My one year old Persona clocked 36K dy.

Hi all.

New Persona owner here. Got it last Sat.

Please add me to the list.

Persona Elegance M-Line (Tranquility Black)

---

Added on September 20, 2010, 1:57 pm..just sharing my 2 days experience with the Persona..

Day 1: The car alignment is a bit off to the left..same goes with the steering wheel.
Day 2: There was this klunk klunk sound when i make u turn or hard corner.
Door lock for front passenger failed to work properly.

went to SC just now and they added the orifice valve to rectify the klunk klunk sound and managed to get him to repair the door lock before i go back to work (i visit them during lunch time)

the mechanic promised to rectify alignment problem together with my 1st service later this week.

so far, fuel consumption is ok i would say. Around 7.6L/100km using Shell RON97. (Full tank approx: RM80).




This post has been edited by brainer: Sep 20 2010, 01:57 PM

samalah.... pegi kedai nak tukar baru.... yg baru pun sama.... last2 suruh kedai naikkan... kena charge rm20... 1 jam nye keje.... nak raya tahun lepas.... lepas pada tu aku tak auto down aku nye windows.... dia nye masalah pada design landasan bergear... patut panjangkan sedikit about 1in, gear dia terlari dari landasan tu...

What is our standard warranty like? 1 or 2 years?

7.6L per 100km. quite save man... is it based on meter or manual calculatation?

Yup his VS and grounding stuff really worth.

first 50,000km or 2 years , whichever came first