actually its depends, my wc delta for my GPU much more lower thn my CPU, GPU 3c delta, CPU 10c-13c for prime95. A higher delta for intel burn-in test, around 15-17c for intel burn in test maximum stress.... using 2x mcp650, 2x mcr220qp, dtek fuzion v1 with 4.4mm nozzle and aquaxtreme mp-01... mayb its proc's IHS or hotter proc gua...

my proc is Q9550 OC'ed to 3.622ghz with 1.34vcore...

bad temps

My gpu delta is same as your, 3-4c diff normally.

Cpu delta is like 6-8c on average.

Combined both is 10c delta.

My proc Q6600 oced to 3.6ghz @ 1.4875v..

wah 9550 need quite a high vid core eh to be on 3.6...i was thinking of changing my proc 9450 to 9550 coz was thinking its much better oc might get 1.2-1.3v on 4ghz,lucky didnt jump to it..

tht's y, sommore mine with more radiator and so on and yet getting higher delta of load temp on cpu... wtf... remount remount and remount still the same, u got any tips to share to get lower delta?

oh ya wat software u use to record the temps ? i still wonder y urs delta so low... share some tips la

mayb my batch no good lo.... but i can reach 3.8ghz with 1.39vcore. 4ghz around 1.45+ gua... beside higher multiplier, no point upgrade from q9450 to q9550 but if E0 is out, u might have a try..

This post has been edited by lichyetan: Sep 1 2008, 02:32 PM

eh bro ur running 3.622ghz daily ar?... 1.34vcore how much vtt?...

1.3vtt 1.31vcore in windows, 1.275vcore in bios.

This post has been edited by lichyetan: Sep 1 2008, 02:11 PM

Im using coretemp/speedfan/gpuz to monitor the temps.

Tips ar ? You saw my rig setup before right ? Still same setup till now..

1.3vtt?... isnt that a little high for daily usage?...

eh 1.3vtt is ok la...i think 1.4 is the limit right so for daily 1.3 is enough..

no E7200 yet ah?

i guess most of them now, have the e8 and e9 fever bro.

Interested to know about the overclockability of the E7xxx series too..

mine did alright but nothing to shout about. my review out already mah.

from my side, i think it's could be mobo limitation.

Yea, OC is good and comparable with E8xxx series. Just that many preferred the E8x00 series over the E7200.

Btw some typo on your review..



This post has been edited by uzairi: Sep 2 2008, 09:32 AM


Attached image(s)

That Level 3 Cache is a bug from cpuz i guess..

Another thing to take note is the orthos, min fft should be 8k and max should be 32k.

That way it will stress the proc even more under my test with E8400 and Q6600. E6300 procs have no problem with the default max fft which is 32k. Not sure whether orthos needs an update on newer procs or not because stressing it at 8k only would not stress it that much even if you run hundreds of loop if u noticed..

didnt see my e7200 run ah?... didnt tweak much cuz no time and its not mine... install proc+OC tweak in 5minutes = this...

12.000s/IcEMoCHa/Intel E7200 Wolfdale 3mb@4500mhz/2GB Crucial Ballistix Tracer PC6400@DDR 2 948,4-4-4-12-2T/Biostar Tpower I45/Watercooling


Attached thumbnail(s)

hey guys...

if u guys are free, pls head over here n help contribute to the database by posting ur results here ya

AIR COOLING DISCUSSION THREAD *BETA*
http://forum.lowyat.net/topic/780286/+0&#entry19660875

This post has been edited by tkh_1001: Sep 4 2008, 08:56 AM

Whoa...what is your secret?! That is an impressive overclock.



How'd you get the E7200 up to 4500Hz? I can't believe you can even pass POST with that.
Any changes on the voltage to NB, and CPU?! If so how much?

i just poped my E8400 under water.
now im getting 38 idle with asus probe and 50 with coretemp.
delta is 10degrees.
woah, seems my temp sensor is totally off

delta of 10c is common for wc bro, what do you use for your wc setup ?