will post my result later...still scratching for the best setting...right now my xeon e3110 running on 3.999ghz....
hope my ram can be push a little bit more..




This post has been edited by kaiser_falco: Mar 28 2008, 10:46 PM

and also the x48 dfi...hehehe thanks bro..im still strugling got few bsod...carry out ram test ok no error but mat=ybe oc in vista quite headache...also seem like i have to feed voltage to 1.26....after drop it goes to 1.3 to stable...dunno maybe i did something wrong...

not just in the US here also...
hmm yo raymond mind telling me ur idle speed?im getting way 55c on standard idle after bios update...that why i revert back my oc..maybe this wat you say on the phone the other day bout temp quite high?oh btw im using tuniq tower to cool it down..

yea...me and raymond running almost the same spec...
so raymond i guess this problem that we are facing is related to the mobo?immatured?i browse arround i dont see any one having problem with e3110 booting up at 1.35v and above..maybe the x48 is still having some imcompatibility and cant boot at 1.35v and above,and that is why it unstable..
hmm i gotta do more reading on this dfi x48 still havent figured out lots of thing,and also bout the e3110..

ok here is my best stable 24/7 setting...if only i can get wc setup..






this board and processor really prove a good chalange to oc...but once you got the right setting for the voltage it stable as rock..

mobo:dfi lanparty x48 t2r
ram:kingston hyper x 6400 4.4.4.12 4gb
proc:ntel xeon e3110

This post has been edited by kaiser_falco: Apr 2 2008, 09:07 PM

look at real temp,61-62c that is full load...occt you have to minus 10...its consider ok for 3.8ghz on air cooling..

hmm my mobo should have no problem with this trick...but can it be oc after that?

hmm but on your siggy you stated you edi running it at 3.6ghz...come la show ss...i also would like to knoe the comparison between this and its older gen..

hmmm im a quad user now or else surely more or less will be getting same speed as you...
oh ya sorry have to abandon your advice cstkl1 coz dfi tech and also raymond confirm with me that e8400 having same symptom as e3110 so no choice have to go for q6600 and now running stable at 3.6ghz
dfi tech support is so marvelous,they really care for their customer...

is this good enough for my rampage+q9450 was thinking of 24/7 setting..

pll:1.57
vtt:1.2
vcore:1.16
@3.4ghz





yo ace tell me ur final setting

This post has been edited by kaiser_falco: Jul 29 2008, 04:40 PM

so my latest attempt on overclocking:

mobo:asus rampage formula(x48) bios 0407
processor:intel quad core 9450 2.66Ghz===>3.66Ghz
cpu cooler:core contact freezer+tuniq bracket+silverstone FM123 FAN
ram:G.skill pc8000 4GB kit
gc:saphirre ati radeon 4870 crossfire(790/1100)
os:window vista X64



on going test.



final after burn test 7 loop

This post has been edited by kaiser_falco: Aug 26 2008, 12:26 AM

show ur 9450 oc ler..i want to compare with mine roughly on 3.6ghz

mine already there la on previous page,i manage to do it on 3.6 wif 1.232v so that why i wanna compare my volt is ok or not?

wah 9550 need quite a high vid core eh to be on 3.6...i was thinking of changing my proc 9450 to 9550 coz was thinking its much better oc might get 1.2-1.3v on 4ghz,lucky didnt jump to it..

eh 1.3vtt is ok la...i think 1.4 is the limit right so for daily 1.3 is enough..