hello, where can i get SABAI OS V4+ for asus rt-16?

You are welcome. Don't worry about bricking the router, personally i would said is it a-bit-that-hard to soft brick asus router as they comes with a restoration utility.

After you had flash the openwrt firmware via restoration utility, head to here:

http://www.klseet.com/index.php/tl-wr740n-...-a-install-luci

And look for this step:



This is the part you need to pay attention after you had successfully flash the openwrt firmware.

Hope to heard good news from you

managed to use Putty to go into openWRT now !!

Now I am stuck at connecting Lan link to Wan of the router to get internet access. How to do that ?

---------------

I managed to head to my office to use their LAN line for the next step.



This post has been edited by peter32: Jan 28 2013, 12:49 PM

Glad to heard that.
Looking forward to heard good news from you

By now, I finally managed to set most of the stuff up with OpenWRT, with fast downloading speed etc. Just that despite the proper set up, I still cannot make the IPTV works.

How come?? Mine is working fine as i follow every steps from KLSeet's website..

Exactly. I double checked the setting, seems correct. One step I just want to ask you:

When I want to create a new service for IPTV, I clicked 'unmanaged' and then trying to save. But I will need to select a parameter as well, which I selected 'creates a bridge ...', and click VLAN interface eth0.600 as required.

I was asked to select one more item even before I proceed to physical setting. In which I selected VLAN eth0.600 also. Did you come across that too ? That step is the only step which was not mentioned at KLseet site.

ps: I was trying to set up port forwarding too, have you tried to do that ?

Hi Danialfarnhan

I am having the same problem as you. Can you please help me on how you manage to get it resolved? Thanks

Hi xiuhan83, please make sure that the ISP profile under IPTV is applied. Make sure the modem is up and connected to the WAN at RT-N66U.

If it is still happen, please let us know what kind of error does it pop out when you set up the connection?

What is the firmware version you are using? You can try update it to the latest, you can download it from the below link.

http://dlcdnet.asus.com/pub/ASUS/wireless/...66U_3004270.zip

Thank you

how come no n16 in asus site ? http://my.asus.com/Networks/AllProducts/

Hi odin88, you can search this model by using the search function at the top right.

If you are facing difficulty searching the model at Malaysia website, you can always the global website

http://www.asus.com

Thank you

This post has been edited by ASUSmy: Jan 31 2013, 05:58 PM

Hello Guys,

I am quite new to Asus N Series. i am having RT-N12 C1 router and using it with unifi. Everything going well with the config. but i am a little unsure about the QoS. My goal is to set several devices in my network to have full speed and high priority. and i want it to be done by IP, not by port. i understand this model unable to set bandwidth limiter based on ip addressing. so i figured that I can at least work on the QoS itself.

this is how i setup currently but somehow i felt probably the entry can be simplified. see below for my current config.





the 2 field that in question are Source ip address and destination port. in my case i wanted to prioritize based on IP, so can i just simply fill up the source ip and leave out the destination port blank? anyone can confirm?

Hi dimenxion, you can leave the destination port blank. By doing so, the device with the IP/MAC will apply this feature with to all the Internet application.

Thank you

thanks for the clarification

Hi dimenxion,

If you would like to have a try on our beta firmware for this model? It will change your GUI to our new GUI ASUSWRT.

Here is the link to download the firmware.

https://www.asuswebstorage.com/navigate/s/2...4A95EB2BF52C95Y

You are require to do a factory reset before and after you update the firmware. And to update you will require to follow the step on the youtube.

http://www.youtube.com/watch?v=HIoQ5Qd11pU

Here is non video guide for your reference.

http://support.asus.com/Search/KDetail.asp...648FE6C1D6D&t=2

Thank you

Hi asusmy,

i am interested to try this new firmware. but is it necessary to use the rescue mode or i can flash the firmware directly via the GUI as well?

Hi dimenxion, ya you need to use rescue mode. If not you will not be able to flash the firmware.

Thank you

alright... will try this beta tonight

I flashed my RT-N13U into open wrt yesterday...guess what.. it only last one day..today the wifi connection disconnected..i've reboot the modem but the wifi is not working anymore..only cable is working..no more asus product after this..sucks..

Hi mlan4, have you try do factory reset and redo the setting? If the problem still persist, do send the device for warranty as our networking device have 3 years warranty.

Thank you