You can pull NEUTRAL line from any nearest available point

ok... but y the aircon poit got 2N??
i can take either 1?
how abt the Live? i not sure which color is Live

like this correct?

thanks alot

Those who wants to operate two electrical appliances one after another at different timing. Especially playing 2 amplifiers alternately in the bird house.


This post has been edited by aeiou228: Sep 1 2012, 12:08 PM

Anyone can advise where and how can I modify the current light switch (one gang clipsal) to the timer control light switch, which I can set to on & off the light.

http://www.farnell.com/datasheets/51984.pdf

You need to provide the timer circuit for us to see how is the wiring. Just the front look cannot understand.

If you intend to use hager, than read through this topic.

If I use Hager. There will be a ugly timer beside the existing light switch. Nit sure there us anything that can replace the light switch... With simple timer switch just like a normal time switch and flat enough... Ti replace the standard clipsal switch.

Std switch don't have neutral line. Most timer require Live + neutral to run.

to power and charge the "timer"/clock

guys... i do not know how to adjust my hager eh711 timer. let say the light on at 7pm to 7am. plz help me coz i really dun understand this manual. even i read terbalik pun cannot understand...

anyone have any contact for doing this wiring ?
i noob in this and worry it will make thing worst ... pm me pls...
kepong area...

Maybe u can consider our solution.. https://forum.lowyat.net/topic/2880446
Besides timer, u can remote control it also..

I just got an electrician do mine for me. RM 85 for Hager EH 711 and RM 50 to install. Liked his work so asking him to do another one for me. This time need to drill a wall and put teh timer inside the houose and pull a neutral wire from the room light source. For That installation charge RM 80.

Where can I buy Hager EH711 around Shah Alam?

Most electrical shop selling wiring switches do carry Hager

I see.. ok, thank you. Will find out soon..

Hi all,

I just bought this timer for my new house at puchong (lighting shop next to Top ten).
i ask the sales person whether this timer can be installed at the DB. he said yes. the maximum is 1000W.

he even showed me how he did to his shop.

Anyone here tried install this timer at DB?

Thanks.

EH711 can install in db. If you need it to drive higher current equipments u need to install a relay.

hi,

thanks for you reply.

what do you mean by higher current equipments?any example?
i only need the timer for1 light for the porch, 2 light at the back, 1 for the side & 1 for LED spot light.
is it ok?

thanks.

Lights is small current, no issue. You need to check if your outdoor light does it seperate from others lighting circuit. Most house will share one circuit for all lighting, or maybe two circuit for entire house lighting. If is share you won't be able to control it from DB.

bro,
thanks for your reply.
sure, will check the circuit with my contractor. i dont want to install the timer next to switch....
but the timer can work for 3 gang switch right (sharing the light - indoor & outdoor)....but very ugly then...
to install next to every light (4-5 timers) will very costly...huhuhuuhu

tq again bro