Halo... any1 installed Hager EH711 timer before?
how can i install it so that my outdoor light can have a timer to run on certain time??
i got the wiring diagram, but cannot get it to work...

thanks thanks

I just bought one unit. Do you might o share with me how you install it?

Thank you.

easy!

just connect live to 1, neutral to 2.

look for the original lamp switch, connect the bottom (non-live) wire and connect to 4

the original wire that connect to the switch (that goes to the lamp) now connect to 5

You mean from the current manual switch, I should have 4 cables?

what if i just got the original lamp switch and i dont have the live and neutral?

Hi Peow Yong,

I have done my switch timer and it is working fine now.

You need neutral to get the device to work because without the neutral the clock wouldn't work.

Here is the wiring
1 - Neutral
2 - Live
3 - <Nothing>
4 - Live
5 - Wire to light

FYI, in the current switch, there must have 2 wires (In & Out). In is the live & Out is the wire to light. To test which one is live, please use a test pen.

This post has been edited by leety: Jul 14 2010, 02:01 PM

Thinking to get one timer for my spotlight, how much does it cost?

Thanks.

Does this mean if I have a light switch, with only 2 wire (live + wire to light) and no neutral (typical of all light switches!!), it will not work? All the wires are usially concealed in the wall... how to get a neutral line?

No, you can't as the clock in the timer would operate without the neutral.

just curious.. is this the one with build in battery to protect the clock ??

incase of power trip/power loss, the settings will still be there and the clock won't lari ?

This post has been edited by JinXXX: May 4 2011, 10:13 PM

yah...
It have two type. one is 1 or 2 days, another if not mistake was 5 days which cost more...

---

Added on May 5, 2011, 4:38 amThis post has been edited by Jo_da48: May 5 2011, 04:38 AM

I hv connect it according to the diagram:
1 - neutral
2 and 4 - i connect with a cable then connect to live from either 2 or 4
5 - connect to the wire light

now my prob is the clock not moving.. is it the product faulty? how to check whether is the product faulty? where to buy a new 1 if the product faulty? how much is it??

This post has been edited by ironj: Jul 4 2011, 05:24 PM

Mind sharing how much this cost roughly? And where did you buy

I search online and noticed someone sell it for RM95... how about selling from shop??

I got my with 24 hours function with cost of RM85

\


I bought Theben timer

Jo_da48, where u got the hager timer??

HW-Racer, Theben timer is another brand??

anybody know where to buy this electro mechanical timer from in

KL/klang valley area .. prefer to buy ori one not fake one...

Interested to know also, but have no idea about this timer thing, i want to set timer for my front gate pillar left and right and also 1 light for car porch to on during night time let said by 7pm automatically ? so do i need 3 timer or 1 can do for 3 ? the shop dun include installation ??

i just bought from top ten hager eh711 ...cost rm85.
any lighting shop also got sell in...but the user manual is in france language not english.

---

Added on July 27, 2011, 5:19 pmhow many timer depend on your wiring.

if those 3 wiring connect from same source from DB...u just need 1 timer next to DB box.

if those 3 light under 3Gang swtich then it should need 1 timer only.

you need to ask wiring man to do it.

i did ask my wiring to do for my front entry door....but he say need to put out another 1 cable out...so i din ask him to do it.

This post has been edited by wrb7878: Jul 27 2011, 05:20 PM