Found the culprit (BIOS). DO NOT UPDATE TO F8. I tried downgrading to F7 and voila, AHCI is back (waste my time reformating my pc thinking my os was the one causing it)

So problematic indeed...when BIOS is the culprit....
My MSI also using same chipset, AHCI worked flawlessly....

hehe
ok i will do 2 notch up on all voltage later .
see if it helps .
anyway, im running my LLC at 19% .
seems like the best option cause vdrop only 0.02v and vdroop impressively 0.02v as well .

mind to show your overclock setting?

My OC settings are as follows:-

300HTT x 11 = 3.3Ghz
CPU-NB = 2400Mhz
HT Link = 2400Mhz
CPU-NB voltage = 1.2V
Vcore = 1.44V in BIOS
CPU:FSB ratio = 1:166 so its 500Mhz (DDR1000)
DRAM timings = 5-5-5-13-20-2T
DRAM voltage = 2.1V (OCZ Reapers)
SB Voltage: Auto
IGP OC: Disabled (default at 500Mhz)
Spread Spectrum = Disabled
AMD CNQ = Disabled
C1E = Disabled
SVM Support = Disabled

SuperPI 1MB = 20.686s
Wprime 32MB = 12.246s

The rest I forgot lol.....


This post has been edited by shinjite: Jun 23 2010, 03:22 PM

Indeed, wasted my time on reformatting :s...

that bios also have issue on unlocking.. i wonder too much flaw but not beta.. if beta i can accept la.

wao, the HT link push until 2400MHz, how about the HT link voltage?

HT Link voltage, I remember not seeing it in BIOS
I will post a pic at home with AMD Overdrive

---

Added on June 23, 2010, 8:07 pmEven with AMD Overdrive also I can't see anything ~_~
Since I didn't set any HT Link Voltage, I assume its 1.1V default

This post has been edited by shinjite: Jun 23 2010, 08:07 PM

wao, default HT link voltage already can let HT link clock to that high already.
but 2400MHz for HT link, is it stable? usually people didn't push HT link.

Like I said....Blend test prime95 stable for 17 hours 43 minutes
So far no crash with Hyper transport overflow haha

you got an awesome chips.

Thanks dude~~
Guess I was lucky for my first time with AMD haha

I have finally learned the ways of how to OC AMD as well, along with current Intel chips

Just basically additional stuffs to tweak compared to my olden P4 days

time for X6 pulak.. haha

Bro, sudah ada Phenom FX5000 loh....hahaha
X6 not necessary, saya punya ialah budget PC

haha, people normally don't get phenom ii X6 for gaming.

If its X6, gaming performance sure lose ler but one can't deny the extra threads needed for the future

If its me, video encoding

haha, yes, phenom ii x6 is good in video transcoding and image rendering.
but i think phenom ii x6 is amd short terms product, because got heard that amd will come out a 8 cores on 2011.

as some people here may noe i have burnt my mobo 770-C45, already sent off to RMA, have to wait for 1 month, haih, but wait.....ah koo ooooooo ah koo guess wut mobo i just bought, GAYGAYBYTE 870A-UD3!!!!!! (bapak show off nyer noob yg bakar mobo sndri nie!)

gud for u... now show us what d board got & do gaygaybite proud...

*to whom it may concerned
i can sense that d dark force of ahsos gettin stronger...

a pre welcome to d ahsos faint club...