must support the asus mouse.. hehe

will try to OC once update the the BIOS n bla3...wil do for sure, tis tyme i better stick to max 1.5volt ONLY for air cooling(gedik nk kejar 4Ghz sgt), btw i cant seem to find guides of Phenom II overcloking that relateas HT link Freq/Volt for better OCing, all they talk bout is just CPU volt/ FSb a.k.a HTT n CPU NB only, any guidance?

This post has been edited by selferino: Jun 24 2010, 09:01 AM

because normally leave it auto.. just play if necessary..

no such rule, like for cu nb freq must be like = cpu freq*2/3.15, no such thing fot the ht link?

u have a be chip there, why make ya life complicated? just crank up d multis (cpu & imc) & whack d volts will do...

the only rule would be:
The HT Link has to be equal or lower than the NB frequency at all times due to the design.

and plus.. higher bandwidth is not always faster.. it's all depends on what application that ur running..

for instance why the HT Link should stay 2000mhz is becoz.. sometimes 2400mhz performing worst..
maybe
1-not stable
2-the application not benefit much
3-the hardware combination is not making any sense
4-high temp
5-voltage throttling etc..

Some more poison for any would be ahsos M4A88TD-V EVO/USB3 users:



Review From PureOC Website

very hard right to get 4ghz.. even just small gap..

woot, another love spreader of ahsos... job well done bro...

on a side note, itu c3 chip (rumoured) leh, sure better than older propus which are on laoya bl-c2 steppin... should be d capability of d chip itself rather than board which make it seems like d board performed godly...

so when is d ETA of d new toy bro...

This post has been edited by ah_khoo: Jun 24 2010, 10:01 AM

Sokong these statements 110%

Damn....multiplier too low for mine AARRRGGGHHHH

need X6 - LOL

if only multi unlockin is as easy as usin pencil/conductive pen to connect d pin like d gud old days of spitfire... that would be nice...

must ask sifu bryan how he can clock his all d way up to 3.5xGHz iirc... i'm pretty sure d chip still got something more to offer...

some noob question from me, wht is VDDNB voltage?i see it in bios but dnt hv idea wht it is..is it NB voltage?

ur referring to cpu nb or the mobo?

nb sure its mobo!

vddnb: Main power supply to the processor NB logic

u are so wrong!

most of the times it refers to CPU-NB which is IMC in CPU.. (it's not like old day ha)
but some got isolated voltage that refer to the mobo chip itself...
must look carefully where the menu came from..

ya, agree to this. its really need relatively high base clock to reach better overclocking.

yup, but sometimes it depends on how gud is d combo (chi+board+ram). if all are ok, 3.5~3.7GHz is doable w/ some luck.

http://forum.lowyat.net/index.php?act=Atta...post&id=1321820

This post has been edited by ah_khoo: Jun 24 2010, 04:24 PM